The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Designed for indoor applications, these cords are often used to power appliances.

Run power to welders in machine shops, garages, and other areas where these cords will be exposed to harsh conditions. These cords have either EPDM or PVC insulation that protects the cord's wires from weld slag and being dragged, kicked, and stepped on.

Designed for indoor use, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

A locking lever on the socket keeps multiple devices connected to these extension cords.

Keep personnel safe from electric shock with these cords.

Keep power flowing in dirty areas with rubber-insulated cords that resist oil, water, and chemicals. A locking lever on the socket prevents your device from disconnecting.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Designed for indoor applications, these cords are often used to power appliances.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

Stop electric shocks before they happen—these cords cut power to equipment when they detect an unsafe current.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

The shielding blocks signal interference from nearby equipment and devices.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Create a secure, vibration-resistant connection on both ends—these cords have a hospital-grade plug and a locking connector on the socket.

These cords work with any Milwaukee tool with a pin socket (Quik-Lok) connection.

Save energy by automatically turning off unused outlets—the master outlet controls the follower outlets and shuts off power to those outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Filters between the outlets on these strips protect computers and other sensitive equipment from external signals that interfere with the equipment’s performance.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.

Connect multiple devices from a single outlet.

Automatically power heating and cooling devices on and off when temperatures rise or drop.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

Install these extra-long strips onto the frame of an electrical cabinet.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Power devices that have a straight-blade connection from a vehicle outlet.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.