Exhaust Fans with 16" Diameter Blade

Filter by

Voltage

Opening Width

Blade Diameter

Mounting Location

Base Width

Overall Height

Electrical Phase

Overall Width

Drive Type

Number of Speeds

Power

Airflow @ Static Pressure

Airflow

Motor Speed

Opening Height

Motor Enclosure Type

Draft Direction

Ambient Temperature

Power Source

Current

Overall Depth

Blade Material

DFARS Specialty Metals

Export Control Classification Number (ECCN)

REACH

RoHS

Forward

How can we improve?

22 Products

About Exhaust Fans

About Sound Levels

Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.

Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers

These light duty fans are designed for use without duct. They come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

For technical drawings and 3-D models, click on a part number.

					For Opening		Overall
Blade Dia.	Airflow, cfm	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Ht.	Wd.	Dp.	Max. Ambient Temperature	Control Type	Frame Material	Blade Material	Mount. Fasteners Included	Mount. Hole Dia.	Specifications Met		Each
120V AC, Single Phase—Hardwire
16"	2,100	1,660	3	1/8	16 1/2"	16 1/2"	19"	19"	9 1/2"	100° F	Pull Switch	Steel	Aluminum	No	5/16"	UL Recognized Component	00000000	0000000
120V AC, Single Phase—Three-Prong Plug
16"	2,100	1,660	3	1/8	16 1/2"	16 1/2"	19"	19"	9 1/2"	100° F	Pull Switch	Steel	Aluminum	No	5/16"	UL Recognized Component	00000000	000000

Direct-Drive Wall-Mount Exhaust Fans with Louvers

These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have an open dripproof motor enclosure for relatively clean, dry, indoor locations. They also have a wire mesh inlet guard to protect the fan from debris.

For technical drawings and 3-D models, click on a part number.

Exhaust Fans

Exhaust Fan

						For Opening		Overall
Blade Dia.	Airflow, cfm	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Ht.	Wd.	Dp.	Housing Material	Frame Material	Blade Material	Specifications Met		Each
120V AC, Single Phase—Hardwire
16"	2,500	61 dBA @ 5 ft.	1,300	1	1/2	21 1/4"	21 1/4"	23 1/2"	23 1/2"	25 1/4"	Steel	Galvanized Steel	Aluminum	C-UL Listed, UL Listed	00000000	000000000

Replacement Motors

Replacement Motor

120V AC, Single Phase
For Airflow, cfm	Motor Speed, rpm	Power, hp		Each
2,500	1,300	1/2	00000000	0000000

Corrosion-Resistant Direct-Drive Wall-Mount Exhaust Fans with Louvers

Rust won't be a problem with the durable plastic housing and louvers on these fans. The fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

For technical drawings and 3-D models, click on a part number.

					For Opening		Overall
Blade Dia.	Airflow, cfm	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Ht.	Wd.	Dp.	Max. Ambient Temperature	Housing Material	Blade Material		Each
120/230V AC, Single Phase—Hardwire
16"	2,400	1,725	1	1/3	21 1/2"	23"	24 5/8"	24 1/8"	23"	104° F	Fiberglass	Polypropylene Plastic	0000000	0000000

Dust-Resistant Direct-Drive Wall-Mount Exhaust Fans

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.

Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.

For technical drawings and 3-D models, click on a part number.

Fans
							Overall										Collars
	Blade Dia.	Airflow, cfm	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Wt., lbs.	Max. Ambient Temperature	Frame Material	Blade Material	Specifications Met		Each		Each
120V AC, Single Phase—Hardwire
3	16"	2,100	Not Rated	1,660	3	1/8	19"	19"	12"	21	100° F	Steel	Aluminum	UL Recognized Component	0000000	0000000	000000	00
3	16"	2,900	49 dBA @ 15 ft.	1,750	1	1/3	24"	24"	12 5/8"	37	104° F	Steel	Aluminum	__	0000000	000000	0000000	0000000

Direct-Drive Wall-Mount Exhaust Fans

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.

Fans with an open dripproof motor enclosure are for relatively clean, dry, indoor locations. Use a collar (sold separately) to connect these fans to a louver.

For technical drawings and 3-D models, click on a part number.

120V AC, Single Phase (Hardwire)—Open Dripproof Motor Enclosure

Fans
						Overall								Collars
Blade Dia.	Airflow, cfm	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Frame Material	Blade Material	Specifications Met		Each		Each
16"	3,400	69 dBA @ 5 ft.	1,550	1	3/4	20 1/8"	20 1/8"	11 1/4"	Powder-Coated Steel	Aluminum	UL Listed, C-UL Listed	0000000	0000000	0000000	0000000

Exterior-Wall-Mount Exhaust Fans

Fan

Louver

Grille

Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls. Use them to draw stagnant and humid air out of a room or area.

Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.

Fans with an open dripproof motor enclosure should be used in clean, dry, and indoor locations. You can use these fans with or without duct. To use them with duct, you'll need an angle ring (not included).

Note: Airflow depends on the resistance created by louvers, filters, and ductwork in your system. This resistance, known as static pressure (SP), is measured in inches of water.

Grilles (sold separately) have fixed blades.

Louvers (sold separately) are gravity operated. The blades open when air flows and close when it stops, preventing backdrafts.

For technical drawings and 3-D models, click on a part number.

Fans
					For Opening			Overall					Grilles		Louvers
Blade Dia.	Airflow @ Static Pressure	Drive Type	Motor Speed, rpm	Power, hp	Dia.	Ht.	Wd.	Dia.	Dp.	Motor Enclosure Type		Each		Each		Each
120V AC, Single Phase—Hardwire
16"	2,400 cfm @ 1/4 in. of H₂O 2,800 cfm @ 0 in. of H₂O	Direct	1,075	1/3	14"	16"	16"	34 11/16"	30 7/8"	Open Dripproof	000000	000000000	0000000	0000000	0000000	0000000

Direct-Drive Upblast Roof-Mount Exhaust Fans

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. These exhaust fans draw stagnant and humid air out through your roof and then expel it up and away from the roof surface. All fans have a disconnect switch to turn off the power for servicing.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

Fans
						Overall									Mounting Bases
	Blade Dia.	Airflow @ Static Pressure	Volume	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Wt., lbs.	Max. Ambient Temp., °F	Housing Material	Specifications Met		Each		Each
Open Dripproof Motor Enclosure
120V AC, Single Phase—Hardwire
1	16"	2,450 cfm @ 1/2 in. of H₂O 2,900 cfm @ 0 in. of H₂O	69 dBA @ 5 ft.	1,625	3/4	31 7/8"	30 1/2"	24 3/4"	80	300°	Aluminum	AMCA Certified, ETL Listed	0000000	000000000	0000000	0000000
Totally Enclosed Motor Enclosure
460V AC, Three Phase—Hardwire
2	16"	3,050 cfm @ 0 in. of H₂O	70 dBA @ 5 ft.	1,750	1/3	22"	26 3/4"	26"	51	120°	Steel	__	0000000	00000000	00000000	000000

Direct-Drive Downdraft Roof-Mount Exhaust Fans

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof. All fans have a disconnect switch to turn off the power for servicing.

Fans with a brushless motor are more efficient than fans with a standard motor. They operate at a wide range of speeds for precise speed control and greater energy savings. They’re also quieter and have a longer lifespan because of their advanced electronic controls.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

For technical drawings and 3-D models, click on a part number.

Fans
						Overall									Mounting Bases
	Blade Dia.	Airflow @ Static Pressure	Volume	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Wt., lbs.	Max. Ambient Temp., °F	Housing Material	Specifications Met		Each		Each
Totally Enclosed Motor Enclosure—Brushless Motor
120V AC, Single Phase—Hardwire
2	16"	2,850 cfm @ 1/2 in. of H₂O 3,300 cfm @ 0 in. of H₂O	71 dBA @ 5 ft.	1,525	1	33 1/4"	23 3/8"	24"	74	120°	Aluminum	AMCA Certified, ETL Listed	0000000	000000000	0000000	0000000
Open Dripproof Motor Enclosure
120V AC, Single Phase—Hardwire
2	16"	2,600 cfm @ 1/2 in. of H₂O 3,100 cfm @ 0 in. of H₂O	70 dBA @ 5 ft.	1,450	3/4	33 1/4"	23 3/8"	24"	77	120°	Aluminum	AMCA Certified, ETL Listed	0000000	000000	0000000	000000

Belt-Drive Downdraft Roof-Mount Exhaust Fans

Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

Fans
					Overall						Mounting Bases
Blade Dia.	Airflow @ Static Pressure	Volume	Motor Speed, rpm	Power, hp	Dia.	Ht.	Base Wd.	Housing Material		Each		Each
Open Dripproof Motor Enclosure
120/208-230V AC, Single Phase—Hardwire
16"	2,800 cfm @ 1/2 in. of H₂O 3,200 cfm @ 0 in. of H₂O	70 dBA @ 5 ft.	1,145	3/4	33 11/16"	29 1/4"	26"	Aluminum	0000000	000000000	0000000	0000000

Hazardous Location Exhaust Fans

These fans have a motor that is UL listed for hazardous environments. Use them to draw stagnant and humid air out of a room or area.

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Add a collar (sold separately) to connect a wall-mount fan these fans to a louver.

For technical drawings and 3-D models, click on a part number.

Fans
							Overall								Collars
Blade Dia.	Airflow, cfm	Volume	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Housing Material	Blade Material	Environmental Rating		Each		Each
120/230V AC, Single Phase—Hardwire
16"	2,800	61 dBA @ 15 ft.	Direct	1,725	1	1/3	20 1/8"	20 1/8"	15"	Steel	Aluminum	NEC Class I Divisions 1, 2 Group D; NEC Class II Divisions 1, 2 Groups F, G	0000000	000000000	0000000	0000000

Direct-Drive Exhaust Fans

With fewer moving parts than belt-drive fans, these direct-drive exhaust fans require less maintenance. They have a built-in grease pan to collect waste while cooking. Mount these fans directly to your roof with the attached mounting brackets. They meet UL standards for ventilation in residential, commercial, and institutional kitchens.

For technical drawings and 3-D models, click on a part number.

Open Dripproof Motor Enclosure
Blade Dia.	Airflow @ Static Pressure	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Overall Ht.	Base Wd.	Max. Ambient Temp., °F	Housing Material	Blade Material	Features	Specifications Met		Each
208V AC, Three Phase—Hardwire
16"	3,000 cfm @ 1/2 in. of H₂O 3,500 cfm @ 0 in. of H₂O	71 dB @ 5 ft.	1,650	Variable	1 1/2	59 3/4"	32 5/8"	350°	Steel	Aluminum	Grease Pan	UL 705, UL 762, ULC-S645, ETL Listed	0000000	000000000