Filter by
DFARS Compliance
About Structural Adhesives
More
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Loctite® Adhesives
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| E-20HP | 1.69 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 000000 |
| E-20HP | 6.76 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (30,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 00000 |
| E-20HP | 13.5 | Cartridge | 20 min. | 24 hrs. | 3,270 | Not Rated | 2:1 | Thick Liquid (37,000 cP) | -25° to 250° | Off-White | Metal, Plastic | 0000000 | 000000 |
Mixer Nozzles, Plungers, and Dispensing Guns
| Each | ||
| Mixer Nozzle for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
| Mixer Nozzle for 6.76 fl. oz. E-20HP Loctite® Cartridges | 0000000 | 0000 |
| Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges | 000000000 | 000000 |
| Dispensing Gun for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
| Dispensing Gun for 6.76 fl. oz. E-20HP Loctite® Cartridges | 0000000 | 000000 |