Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.

Even when used under water, these adhesives maintain their strength.

For invisible bond lines, these adhesives dry clear.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

These self-extinguishing epoxies meet UL 94 V-0 for flame retardance.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Dispense ready-to-use conductive liquid to fill pits and small gaps on circuit board components.

Make castings and fill voids with these two-part pourable epoxies.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Protect circuit boards and other electronics where high heat is a concern but you don’t need to transfer that heat elsewhere. These compounds are a good middle ground between standard epoxy compounds and heat-transfer compounds.

Combine the flexibility of silicone with the durability of standard epoxy—these compounds are great for protecting sensitive electronics that need to flex or expand and contract.

Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.

High humidity, harsh chemicals, water submersions, and salt are no match for these electronic coatings.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Touch up scratches and wear on your enclosure with paint that matches its color.