Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Slice off your required amount, then knead it together to form a moldable adhesive.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Paste fillers resist alkalies, solvents, gasoline, and oil.

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Coat electronics for durability in tough conditions while blocking EMI/RFI signals. Made of epoxy mixed with silver-coated copper, these coatings are stronger than acrylic EMI/RFI coatings. They are rigid enough to withstand the wear of access panels and industrial cabinets. You can also use them in engine compartments because they resist damage from high temperatures and chemicals. Also known as conductive paint, they shield your parts from interference that could cause circuit malfunction and data loss. Mix the two parts of these compounds together and paint them on components. These coatings cannot be sold to Canada due to product labeling requirements.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within. These thick coatings can also be used in chutes and on foundations for a smooth, glossy surface that resists abrasion, chemicals, and extreme temperatures once cured. Apply with a brush or roller. The size listed is the combined total of the two parts.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.

Apply gallon-sized water-based coatings with a roller. Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.

White coatings are frequently used on walls, ceilings, doors, and stairwells.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Epoxy coatings have excellent chemical resistance. They’re often used on panels, ducts, and drain pans. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags. They can be applied directly to metal without a primer. They resist corrosion, abrasion, and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Use these coatings on structural steel beams and pipes. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.

Acrylic paint is water-based and can be cleaned up with soap and water. It’s also known as latex paint. Paint with a 7-day overall dry time resists weather and mild chemicals once fully dry.

Apply paint in a one-gallon can with a brush, roller, or sprayer.

Safety-color paint comes in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety red indicates danger and is often used on fire protection equipment, containers for flammable liquid, and switches on machinery. Safety orange indicates hazards and is often used on warning signs, construction equipment, and unguarded edges. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons. Safety green indicates general safety and is often used to identify first aid kits and other medical equipment and to explain safety procedures. Safety blue is used on “out of order,” “employees only,” and other general-information signs.

Paint that cannot be sold to the regions listed exceeds local regulatory limits on VOC (volatile organic compounds).

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel to prepare the surface for paint while forming a protective layer. Apply with a brush, roller, or sprayer.

Epoxy primers have excellent abrasion resistance. The container size listed is the combined total of the three parts.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.