Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Patch concrete floors, stairs, and walls with these compounds.

Epoxy compounds are three-part compounds consisting of a resin, a hardener, and aggregate in separate containers that can be mixed in the pail. The size listed is the combined total of the parts. They have excellent impact and chemical resistance. Thick liquid compounds are ready for traffic in two hours, and can withstand steel wheels and forklifts.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they stand up to heavy steel-wheel traffic and heavy blows without cracking. Apply with a trowel. They're ready for foot traffic in 12 hours. The resin and hardener are in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel-wheel traffic and heavy impact. Apply with a trowel. They're ready for foot traffic in 12 hours. The resin and hardener are in separate containers that can be mixed in the pail. The size listed is the combined total of the two parts.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals, such as acids, alkalies, salt water, and common solvents and cleaners. Its lightweight formula makes this grout easy to spread. Use in horizontal or vertical joints—grout won’t sag or shrink. Apply with a grout float. It can be cleaned up with water when wet; it doesn’t require a sealer once it cures. The size listed is the combined total of the two parts.

Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.

Loctite® ES1001™, ES1902™, and ES2500™ come with a mixer nozzle.

Compounds that cannot be sold to Canada are restricted by product labeling requirements.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Apply gallon-sized solvent-based coatings with a notched trowel, sprayer, or a roller cover for thick coatings (sold separately).

Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface. Apply with a notched trowel, roller, or sprayer. The size listed is the combined total of the two parts. They cannot be sold to the regions listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Coatings in a pail have a resin and a hardener in separate containers that can be mixed in the pail.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction for pedestrian, cart, and hand-truck traffic. Apply with a roller. The size listed is the combined total of the two parts.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water; not for use with drinking water. Apply with a sprayer. The size listed is the combined total of the two parts. Coatings cannot be sold to the regions listed due to local regulatory limits on VOC (volatile organic compounds).

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight. They cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).

Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Create a washable writing surface.

Layer a basecoat of magnetic paint with water-based chalkboard paint to create a magnetic chalkboard surface.

Solvent-based chalboard paint cannot be sold outside the United States due to product labeling restrictions.

Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading. Scrape rusty areas clean before application. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life and corrosion resistance of paint.

Acrylic paint is water-based and can be cleaned up with soap and water. It’s also known as latex paint. Paint with a 7-day overall dry time resists weather and mild chemicals once fully dry.

Apply paint in a one-gallon can with a brush, roller, or sprayer.

Paint that cannot be sold to the regions listed exceeds local regulatory limits on VOC (volatile organic compounds).

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.

Touch up scratches and wear on your enclosure with paint that matches its color. This acrylic lacquer paint has strong adhesion and resists detergent and water—including in washdown environments—as well as abrasion, heat, and alcohol. It sprays evenly onto surfaces, with no need for additional tools such as brushes.

This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices. Apply with a brush, roller, or sprayer.

Mark traffic lanes, parking lots, and factory floors.

Acrylic paint withstands abrasion in high-traffic areas.

Apply paint in a one-gallon can and a five-gallon pail with a brush, roller, or sprayer.