We will reply to your message within an hour.
Made of EPDM rubber, these seals resist water, sunlight, and ozone.
Commonly used on vehicle windows, these seals have a flocked, velvet-like finish to reduce friction.
Push these T-seals into grooves and channels to block out moisture, dust, and debris.
Made of EPDM foam or EPDM rubber, these seals stand up to water, sunlight, and ozone.
Made of EPDM foam, these seals resist water, sunlight, and ozone while also meeting transportation industry standards for flames, smoke, and toxicity.
These seals have an EPDM foam rubber bulb.
Instead of cutting and adhering straight pieces together to cover a corner, these seals save you time and effort by coming already formed to 90°. All are made of EPDM foam to resist water, sunlight, and ozone.
FDA compliant and made of silicone rubber, these seals are safe for direct contact with food and in temperatures up to 350° F.
Seal food areas that can reach temperatures up to 375° F.
More compressible than seals with a solid bulb, these seals have a hollow bulb.
These seals have a solid bulb.
Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.
The EPDM rubber wiper is firmer and more durable than the EPDM foam rubber wipers.
These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.
In addition to oil, these seals resist grease, salts, water, steam, and most detergents.
With an accordion shape, these seals extend to cover large gaps, so they block debris and allow the two edges they connect to move.
Softer and more flexible than EPDM rubber, these EPDM foam seals have a wiper that clears debris and a bulb that conforms to uneven surfaces to guard against dust, noise, and vibration.
Seal stationary windows into place with these EPDM seals. EPDM resists water, sunlight, and ozone.
Use these H-seals to lock out moisture, dust, and debris around windows and panels.
Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.
These seals are made of solid EPDM foam rubber.
These solid EPDM rubber seals also resist salts.
Hollow construction makes these seals more compressible than solid rubber seals. Made of EPDM rubber, they also resist salts.
Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.
Firmer and more durable than EPDM foam rubber seals, these seals are made of EPDM rubber. They also resist salts.
Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.
A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.
Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.
This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.
In addition to water and steam, this EPDM cord stock resists diluted salt solutions, ethanol, and isopropyl alcohol.
These kits include everything you need to make your own Buna-N, fluoroelastomer, or EPDM O-rings.
Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.
EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.
Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.
These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.
Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.
These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.
An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.
Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.
Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.
Sunlight, ozone, and water won’t affect these sheets and strips.
These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.
Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.
With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.
For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.
Resistant to sunlight, ozone, and water, these rods are sized to seal narrow spaces such as channels.
Made of EPDM, these rubber balls won’t degrade from sunlight, ozone, or water. They can be used to clean screens inside vibrating sifters, dampen vibration inside assemblies, and seal pumps and check valves.