Carbide Square End Mills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/887/8876a23p1-upa06-@halfx_637604673213349029.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/888/88815a45-@halfx_637824458367360441.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/306/3066a21-@halfx_637825807901785698.png?ver=imagenotfound)
For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square slots, pockets, and edges.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills. Titanium-nitride (TiN) coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Titanium-carbonitride (TiCN) coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Titanium-aluminum-nitride (TiAlN) coated end mills and aluminum-titanium-nitride (AlTiN) coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication.
Center-cutting end mills allow plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 000000 |
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Nitride (TiN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 000000 |
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Carbonitride (TiCN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 00000000 | 00000 |
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
High-Speed Steel Square End Mills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/305/3051a18p1-a02a-digital@halfx_636185335720000000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/891/8918a53p1-a02a-digital@halfx_636185362250000000.png?ver=imagenotfound)
Use these end mills for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. They have a square end for milling square slots, pockets, and edges.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs. Use titanium-nitride (TiN) coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.
Center-cutting end mills allow plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 3/8" | 13/16" | 2 1/2" | Equal | 30° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
4 Flute | |||||||||
13/32" | 3/8" | 1" | 2 11/16" | Equal | 30° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
13/32" | 3/8" | 2 3/4" | 4 1/2" | Equal | 30° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
Titanium Nitride (TiN) Coated | |||||||||
2 Flute | |||||||||
13/32" | 3/8" | 13/16" | 2 1/2" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | Center Cutting | 0000000 | 00000 |
4 Flute | |||||||||
13/32" | 3/8" | 1" | 2 11/16" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Steel, Tool Steel | Center Cutting | 0000000 | 00000 |
13/32" | 3/8" | 2 3/4" | 4 1/2" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Steel, Tool Steel | Center Cutting | 00000000 | 00000 |
High-Speed Steel Square End Mills with Two Milling Ends
![](/prerenderstable/mvPRE/contents/gfx/imagecache/304/3049a29p1-a02a-digital@halfx_636185335010000000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/305/3050a28p1-a02a-digital@halfx_636185335470000000.png?ver=imagenotfound)
When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs. Use titanium-nitride (TiN) coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills, which means they last longer when run at similar speeds.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 1/2" | 13/16" | 3 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
4 Flute | |||||||||
13/32" | 1/2" | 1" | 4 1/8" | Equal | 30° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
Titanium Nitride (TiN) Coated | |||||||||
2 Flute | |||||||||
13/32" | 1/2" | 13/16" | 3 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | Center Cutting | 0000000 | 00000 |
4 Flute | |||||||||
13/32" | 1/2" | 1" | 4 1/8" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Tool Steel | Center Cutting | 0000000 | 00000 |
Carbide Ball End Mills
![](/prerenderstable/mvPRE/contents/gfx/imagecache/888/88805a71p1-upa06-@halfx_637604647535250793.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/887/8878a23p1-a02a-digital@halfx_636233077340000000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/888/88825a45p1-a02a-digital@halfx_636233077600000000.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/888/88805a45p1-a02a-digital@halfx_636664769628180135.png?ver=imagenotfound)
For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills. Titanium-nitride (TiN) coated end mills create less friction than uncoated end mills, which means they last longer when run at similar speeds. Titanium-carbonitride (TiCN) coated end mills have a hard, smooth finish that resists chipping and wear and prevents material from accumulating on the cutting edge. They’re especially good for use in aluminum. Titanium-aluminum-nitride (TiAlN) coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication.
For technical drawings and 3-D models, click on a part number.
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
---|---|---|---|---|---|---|---|---|---|
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Nitride (TiN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Nitride (TiN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Nitride (TiN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Carbonitride (TiCN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Carbonitride (TiCN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Carbonitride (TiCN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Aluminum, Brass, Bronze, Fiberglass, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
---|---|---|---|---|---|---|---|---|---|
4 Flute | |||||||||
13/32" | 7/16" | 1" | 2 3/4" | Equal | 30° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |