Carbide Square End Mills
For longer tool life and a better finish in general purpose milling applications, these solid carbide end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel end mills. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a square end for milling square slots, pockets, and edges.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds. Use coated end mills for demanding, high-speed jobs in hard material as well as for longer production runs. They’re more wear resistant than uncoated end mills. Titanium-aluminum-nitride (TiAlN) coated end mills and aluminum-titanium-nitride (AlTiN) coated end mills dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. Noncenter-cutting end mills are for operations where the peripheral teeth do most of the work, such as shoulder milling, contouring, and finishing. They cannot be used for plunge cuts.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
7 Flute | |||||||||
| 3/16" | 3/16" | 5/8" | 2" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 000000 |
| 1/4" | 1/4" | 3/4" | 2 1/2" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 00000 |
| 3/8" | 3/8" | 1" | 3" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 00000 |
9 Flute | |||||||||
| 1/2" | 1/2" | 1 1/4" | 3" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 000000 |
| 5/8" | 5/8" | 1 5/8" | 3 1/2" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 000000 |
11 Flute | |||||||||
| 3/4" | 3/4" | 1 5/8" | 4" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 000000 |
| 1" | 1" | 2" | 6" | Equal | 35° | Hardened Steel, Iron, Nickel, Stainless Steel, Steel, Titanium, Tool Steel | Noncenter Cutting | 0000000 | 000000 |
Fast-Cutting Carbide Square End Mills for Nickel
Four flutes with a 35° helix angle provide a smooth finish on nickel alloys, such as Monel, Inconel, and Hastelloy. Variable spacing between the flutes reduces vibration, allowing these end mills to provide fast cuts, smooth finishes, and long tool life on hard materials. They have a square end for milling square-bottomed slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
Made of solid carbide, these end mills are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish on hard material. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking.
A titanium-aluminum-nitride (TiAlN) coating allows them to dissipate heat better than other end mills, especially at high speeds. At high temperatures, the coating creates a layer of aluminum oxide that transfers heat to the chips, keeping the tool cool, even when used without lubrication. This makes these good for aggressive machining while roughing or making interrupted cuts.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
4 Flute | |||||||||
| 1/8" | 1/8" | 3/8" | 1 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/16" | 3/16" | 7/16" | 2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/4" | 1/4" | 7/16" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/4" | 1/4" | 3/4" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/4" | 1/4" | 1 1/4" | 3 1/4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 5/16" | 5/16" | 13/16" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 5/16" | 5/16" | 1 1/4" | 3 1/4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 5/16" | 5/16" | 1 5/8" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 3/8" | 3/8" | 7/8" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 3/8" | 3/8" | 1 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 3/8" | 3/8" | 2 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 7/16" | 7/16" | 1" | 2 3/4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/2" | 1/2" | 5/8" | 2 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/2" | 1/2" | 1" | 3" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/2" | 1/2" | 1 1/4" | 3 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 00000 |
| 1/2" | 1/2" | 1 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1/2" | 1/2" | 2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1/2" | 1/2" | 2 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1/2" | 1/2" | 3" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 5/8" | 5/8" | 3/4" | 3" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 5/8" | 5/8" | 1 1/4" | 3 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 5/8" | 5/8" | 1 5/8" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 5/8" | 5/8" | 2 1/4" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 5/8" | 5/8" | 3" | 6" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 7/8" | 3 1/2" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 1 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 1 5/8" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 2 1/4" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 3" | 6" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 3/4" | 3/4" | 4" | 6 1/4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1" | 1" | 1 1/2" | 4" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1" | 1" | 2" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1" | 1" | 2 1/2" | 5" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1" | 1" | 3" | 6" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
| 1" | 1" | 4" | 7" | Variable | 35° | Nickel | Center Cutting | 000000000 | 000000 |
Roughing High-Speed Steel Square End Mills
Serrations along the cutting edge act as chip breakers, so these end mills can remove large amounts of material at high speeds. They are high-speed steel for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their square end makes them good for milling square slots and edges.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Center-cutting end mills allow plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Pitch | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
3 Flute | ||||||||||
| 1/4" | 3/8" | 5/8" | 2 7/16" | Coarse | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
| 5/16" | 3/8" | 3/4" | 2 1/2" | Coarse | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
High-Speed Steel Square End Mills with Two Milling Ends
When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Use uncoated end mills for general purpose milling and short production runs.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 1/8" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 15/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 5/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 21/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 7/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 13/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/4" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
4 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
Cobalt Steel Square End Mills with Two Milling Ends
When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their square ends make them good for milling square slots, pockets, and edges. All are center cutting, allowing plunge cuts into a surface.
End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts. End mills with four flutes provide a finer finish and operate with less vibration when run at high speeds.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | O'all Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/64" | 3/16" | 1/8" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/64" | 3/16" | 15/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 7/64" | 3/16" | 5/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 7/64" | 3/16" | 21/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 9/64" | 3/16" | 7/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 9/64" | 3/16" | 13/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 11/64" | 3/16" | 1/4" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 11/64" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
4 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 00000000 | 00000 |
Carbide Ball End Mills for Carbon Fiber, Fiberglass, and Graphite
These end mills have a diamond or diamondlike coating for machining abrasive material, such as carbon fiber, fiberglass, and graphite. Made of solid carbide, they are harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
End mills with fewer flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts; end mills with more flutes provide a finer finish and operate with less vibration when run at high speeds.
Diamondlike-carbon (DLC) coated end mills are an economical option for short runs and intermittent use.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Diamondlike Carbon (DLC) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
| 1/64" | 1/8" | 5/64" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 000000 |
| 1/32" | 1/8" | 5/32" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 3/64" | 1/8" | 1/4" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 1/16" | 1/8" | 1/8" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 1/16" | 1/8" | 1/2" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 5/64" | 1/8" | 1/2" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 3/32" | 1/8" | 3/16" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 3/32" | 1/8" | 3/4" | 2 1/2" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 1/8" | 1/8" | 1" | 3" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
4 Flute | |||||||||
| 3/16" | 3/16" | 1 1/8" | 3" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
| 1/4" | 1/4" | 1 1/2" | 4" | Equal | 35° | Carbon Fiber, Fiberglass, Graphite | Center Cutting | 0000000 | 00000 |
Carbide Ball End Mills for Stainless Steel and Titanium
With a wear-resistant titanium-aluminum-nitride (TiAlN) coating, these end mills provide excellent shearing and chip removal in stainless steel and titanium. Made of solid carbide, they’re harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. They have a ball end for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
3 Flute | |||||||||
| 1/8" | 1/8" | 1/4" | 1 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |
| 1/8" | 1/8" | 1/2" | 1 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 5/16" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 5/16" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 7/32" | 1/4" | 3/8" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1/4" | 1/4" | 3/8" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 9/32" | 5/16" | 7/16" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 5/16" | 5/16" | 7/16" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 11/32" | 3/8" | 1/2" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 7/16" | 7/16" | 9/16" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1/2" | 1/2" | 5/8" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1" | 1" | 2" | 5" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |
High-Speed Steel Ball End Mills with Two Milling Ends
When one end wears out, switch to the opposite end for two times the life of a standard high-speed steel end mill. Made of high-speed steel, these end mills are for general purpose milling in most material, such as aluminum, brass, bronze, iron, and steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 1/8" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 15/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 5/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 21/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 7/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 13/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/4" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, Steel | Center Cutting | 0000000 | 00000 |
Cobalt Steel Ball End Mills with Two Milling Ends
When one end wears out, switch to the opposite end for two times the life of a standard cobalt steel end mill. With better heat and wear resistance than high-speed steel, these cobalt steel end mills can run at higher speeds and provide better performance on hard material, such as iron, hardened steel, titanium, and tool steel. Their ball ends make them good for milling rounded slots, slopes, and contours. All are center cutting, allowing plunge cuts into a surface.
End mills with two flutes provide better chip clearance for high-volume, high-speed plunge, slotting, and roughing cuts.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Uncoated | |||||||||
|---|---|---|---|---|---|---|---|---|---|
2 Flute | |||||||||
| 1/16" | 3/16" | 3/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 000000 |
| 1/16" | 3/16" | 3/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 1/16" | 3/16" | 7/32" | 2 1/2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 1/8" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 5/64" | 3/16" | 15/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/32" | 3/16" | 9/32" | 2 5/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 5/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 7/64" | 3/16" | 21/64" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/16" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/8" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 1/8" | 3/16" | 3/4" | 3 1/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 7/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 9/64" | 3/16" | 13/32" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 15/64" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/16" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 7/8" | 3 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/4" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 11/64" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 9/32" | 2" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1/2" | 2 1/4" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 1" | 3 3/8" | Equal | 35° | Aluminum, Brass, Bronze, Hardened Steel, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel | Center Cutting | 0000000 | 00000 |
Carbide Rounded-Edge Square End Mills for Stainless Steel and Titanium
With a wear-resistant coating and high helix angle, these end mills provide excellent shearing and chip removal in stainless steel and titanium. Made of solid carbide, they’re harder, stronger, and more wear resistant than high-speed steel and cobalt steel for the longest life and best finish. Their extreme hardness means they are brittle, so a highly rigid setup, such as a CNC machine, is necessary to prevent the end mill from breaking. Often used for slotting and pocketing cuts in mold and die making, they have a 90° profile and rounded corners, which reduce flute breakage and chipping. All are center cutting, allowing plunge cuts into a surface.
For technical drawings and 3-D models, click on a part number.
| Mill Dia. | Shank Dia. | Lg. of Cut | Corner Cut Radius | Overall Lg. | Flute Spacing | Helix Angle | For Use On | End Mill Type | Each | |
Titanium Aluminum Nitride (TiAlN) Coated | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
3 Flute | ||||||||||
| 1/8" | 1/8" | 1/4" | 0.01" | 1 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 000000 | 000000 |
| 1/8" | 1/8" | 1/2" | 0.01" | 1 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 5/32" | 3/16" | 5/16" | 0.01" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 5/16" | 0.01" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/16" | 3/16" | 9/16" | 0.01" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 7/32" | 1/4" | 3/8" | 0.02" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1/4" | 1/4" | 3/8" | 0.02" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1/4" | 1/4" | 3/4" | 0.02" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 9/32" | 5/16" | 7/16" | 0.02" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 000000 | 00000 |
| 5/16" | 5/16" | 7/16" | 0.02" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 5/16" | 5/16" | 13/16" | 0.02" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/8" | 3/8" | 1/2" | 0.02" | 2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 3/8" | 3/8" | 1" | 0.02" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 7/16" | 7/16" | 9/16" | 0.02" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 1/2" | 1/2" | 5/8" | 0.03" | 2 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 000000 | 00000 |
| 1/2" | 1/2" | 1 1/4" | 0.03" | 3" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 00000 |
| 5/8" | 5/8" | 3/4" | 0.03" | 3" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |
| 5/8" | 5/8" | 1 5/8" | 0.03" | 3 1/2" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |
| 3/4" | 3/4" | 1" | 0.03" | 3" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |
| 1" | 1" | 2" | 0.03" | 5" | Equal | 35° | Stainless Steel, Titanium | Center Cutting | 0000000 | 000000 |