These platforms are nonconductive fiberglass. Configure them to fit your application.

Raise and lower the leg height on these standard platforms to meet different workers' requirements.

Maintain equal spacing when you adjust the overall height. The distance between the floor and the first step is always the same as the distance between the steps to meet OSHA requirements.

Stack platforms vertically and connect them horizontally to create various sizes and configurations.

Access elevated areas with these platforms that meet Fed. Std. Class 100 and ISO Class 5 clean room requirements.

Create additional workspace to safely and efficiently load, unload, and secure items on a flatbed trailer.

Fold these scaffolds for easy transport and storage.

Even if your surface isn't level, your scaffold can be—the end frames on these scaffolds adjust independently so you can set each side at a different height.

Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards.

These plywood planks have hooks on the ends that fit over scaffold tubing.

Ladders are shipped unassembled to save on freight costs.

Made entirely of 304 stainless steel, these ladders are more corrosion resistant than aluminum.

Aluminum is lighter than steel and stainless steel, making these ladders easier to roll between work areas.

Grip the handrail for stability. While in use, wheels retract and the cup shoes rest directly on the floor to prevent movement.

Picking and putting away material just got easier. Ladders have three shelves with raised edges that each hold 70 lbs.

Extra bracing in the base and back makes these ladders tough enough to handle harsh environments.

Fold these ladders for easy transport and compact storage.

Not only can you climb on either side of these ladders, two people can use the oversized platform simultaneously.

With an oversized platform, two people can work side by side.

Release the chain across the back of this platform so you can walk through to unload and load trailers.

Aluminum is a good choice for damp areas and outdoor use.

Aluminum is a good choice for damp areas and outdoor use. Set at a steeper angle than our other crossover bridges, these bridges require less floor space.

These ladders have a large platform and a waist-high guardrail, making them safer and more comfortable than standard ladder rungs for prolonged standing and reaching.

The large platform is more comfortable than a step for prolonged standing. With steps on both sides, you can climb from either side or have one person on each side.

With spring-loaded casters, these step stools are easy to move between work areas.

These durable tables won't warp or splinter. Use them to elevate machinery and equipment up to 24" from the floor.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

With a thick steel frame and welded construction, these tables have a capacity of 10,000 lbs. Use them to elevate machinery and equipment 24" from the floor.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

Often used in laboratories and food-processing areas, these tables withstand repeated washdowns and resist damage from grease and chemicals. They can be configured for either seated or standing tasks.

With an extra-smooth nonconductive surface, these tables won't trap dirt and oil, making them easy to clean. They can be configured at a custom height.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

With a thick steel frame and welded construction, these tables have a capacity of at least 10,000 lbs.

With a flatness tolerance of 0.002" per foot, these tables provide an accurate reference surface for layout and inspection work. They have a thick steel frame and welded construction to support 35,000 lbs.

Raise or lower these tables to a comfortable working height.

These indoor tables are often used in cafeterias and break rooms.

Keyhole slots in the legs allow you to adjust the height of these workbenches in 1 1/2" increments.

To keep work from falling off the top, these workbenches have a backstop and side stops.

Choose a workbench and then add any of the optional accessories. All workbenches come with a support brace and have legs with knockouts in the front and back to accept duplex electrical outlets.

Start with the workbench and then customize the interior by adding drawers and shelves.

These workbenches are dent and rust resistant.

At 24" wide, these compact workbenches provide storage and a work surface even when space is limited.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Switch between sitting and standing while working.

Narrow openings give this grating a higher load bearing surface than our standard metal bar grating and reduce the chance of something falling through.

Formulated to protect against odors, stains, and degradation, this grating is often used in food-processing areas.

The most economical stair treads we offer.

These lightweight fiberglass treads are corrosion resistant, nonconductive, and nonmagnetic.

An integral toeboard keeps tools and parts from falling off this plank grating and meets OSHA 29 CFR 1910.23 for elevated walkways.

An extra-long, reinforced tabletop gives you plenty of room for oversized loads.

These tables have a foot lever and hydraulic pump to raise loads and either a hand valve or hand lever for controlled lowering.

For easy access to material, the tabletop rotates 360° and locks in any position.

An extra-large tabletop provides plenty of room for oversized loads.

These tables are compact, yet provide the lifting capacity of standard lift tables.

These tables have a foot lever and hydraulic pump to raise the load.

Choose your table based on capacity, then choose the type of control that best suit your application.

Place these turntables on a bench top to raise an object above the surface for better access to all sides while working.

Attach a monitor to these stands, then route cords through the hollow mounting poles for a clean, organized appearance.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

A hydraulic pump powered by a rechargeable battery raises and lowers the load with the push of a button.

Sized to move pallets, set these dollies to a comfortable working height while loading and unloading.

Use these mounts with robot bases to secure your controller near your robot arm for easy access and to cut down on cord lengths.

Mix and match a variety of components to create a custom workstation for moving parts in and out of CNC machines or other similar applications.