Often used to pinpoint flow issues, these flowmeters clamp onto pipe, so you can spot-check the flow rate at different points without disassembling your system. They measure by tracking the time it takes for ultrasonic waves to pass through your liquid, so they don’t need to come into contact with your liquid.

Also known as magmeters, these transmitters use a magnetic field to measure flow rate and temperature with high accuracy.

Send flow rate and temperature measurements simultaneously to a programmable logic controller (PLC), data logger, or other receiving device.

Often used in low-flow metering applications for lubricants or antifreeze, these transmitters measure flow rate and send the data to a remote display or programmable logic controller (PLC).

Commonly referred to as thermal mass flowmeters, these transmitters calculate flow rate by measuring how much they cool as air and other gases pass through them. This means they’re accurate even if there are temperature and pressure changes, unlike most other transmitters.

Easy to remove for cleaning and maintenance, these flowmeter/totalizers connect to sanitary quick-clamp fittings (often called tri-clamp fittings) and measure the flow rate and volume of liquid passing through your system.

Using the flanged ends, securely install these flowmeter/totalizers in large, high-flow pipelines to measure the flow rate and total volume of liquid flowing through.

With one meter, these flowmeter/totalizers measure the flow rate and total flow volume of high-temperature liquid up to 200° F.

The digital display on these totalizers makes it easy to check the total amount of high-temperature liquid—up to 200° F—passing through your system.

Track batches and the total amount of gasoline, diesel fuel, and kerosene passing through your system.

Since they come factory set to a specific set point, these switches are easier to install than adjustable flow switches.

Activate or deactivate equipment when your flow rate reaches a set point.

Safe to use where flammable gases and combustible dust may be present, these switches activate or deactivate when your flow reaches a factory-set level. All are UL listed for hazardous environments.

Instead of disassembling your system for inline installation, thread these flow switches onto a mounting adapter and insert them into a pipe tee or pipe outlet. They send digital signals to your programmable logic controller (PLC) to activate automated controls or alarms when they reach a set flow rate.

Easy to install, these flow switches come already set to a specific set point and don’t require you to disassemble your pipeline.