This wire meets stringent military specifications for material quality.

Maintain a supply of Mil. Spec. wire in multiple colors.

Run power over rough surfaces—this wire has thick insulation that stands up to wear and tear.

The PEEK insulation on this wire won't degrade when exposed to radiation, and is often used in nuclear energy production.

With a slim PFA plastic insulation, this wire has the same heat resistance as standard high-temperature wire but its diameter is one-third the size for use in tight spaces.

Keep several colors of high-temperature wire on hand with these assortments.

Use this wire in high-voltage applications that require 10,000 volts DC or greater, such as in high-power signs and lasers.

When pulled lengthwise, this unshielded wire extends 40% and then returns to its original length, so it's useful for high-vibration applications.

Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.

Often found in older vehicles, this fusible link wire protects a circuit in applications where you can’t use a standard fuse.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

Insulated with TPE, this wire won’t break down from oil, coolant, or chemicals, and it carries a strong signal even when repeatedly bent. This makes it great for greasy equipment on automated lines, such as lubricated cable carriers.

Also known as photovoltaic (PV) wire, this wire won’t deteriorate from UV light when used outdoors. It’s often used in solar panels.

Assortments include wire in multiple lengths and colors.

Keep multiple colors of wrap wire on hand to color code connections in circuit boards for easy identification.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with hand tools and other portable devices.

Rated to 12 volts DC, this cable is often used in low-voltage applications such as battery and vehicle wiring and radios. Also known as GPT cable.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

Often used in mining equipment, submersible pumps, and drilling rigs, this cable withstands 2,000 volts AC/DC.

Often used to wire pendant switches, this cable hangs from an overhead connection. Also known as bus drop cable.

Supply power to submersible pumps in water or oil wells.

The insulation has excellent resistance to oil, so this cable can be used near motors. Often used in automated applications, it withstands continuous motion without degrading data or signal transmission

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

For use in tight spaces, this cable has up to a 40% smaller OD than standard continuous-flex cable. It withstands continuous motion without degrading data or signal transmission.

Bend and flex this silicone-insulated cable in temperatures up to 350° F. It can keep moving in areas twice as hot as most other continuous-flex cables without degrading data or signal transmission.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

This cable has an uninsulated ground wire that touches the protective metal armor so it can be used for bonding and grounding. It's often used along the exterior of walls to carry power to outlet boxes. Also known as AC cable.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

After extending to full length to provide added reach, this cable retracts and self-coils for tangle-free storage. It's often used with low-current circuits such as microphones and headsets.

Prevent damage to wires for fire alarm systems, smoke detectors, and other critical circuits with this armored cable.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use in critical circuits such as fire alarms and smoke detectors.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Often used in electronic prototyping or in the interior of computers, this flat cable is ultra flexible with small-gauge wires so it fits in tight spaces.

Also known as plenum cable, this cable has low-smoke insulation and can be used without conduit in ductwork and above a drop ceiling. Use it to send data between computers, servers, and switches.

From mines and factories to robotics, this rugged Ethernet cable sends data between sensors and switches in the grimiest places.

Connect telephones and telephone blocks to a wall jack.

Approved for flame resistance, this cable meets Mine Safety and Health Administration (MSHA) standards. The insulation resists abrasion and chemicals.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

Tug these cords to full length, and they’ll stay plugged in. Also called hospital-grade cords, they form an extra-tight connection with outlets. After stretching, they return to a tight, tangle-free coil.

Power multiple devices from one power source.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

FDA compliant for direct contact with food, these cords are safe to use with 12 mm proximity switches, valves, and power supplies in food, beverage, and pharmaceutical applications.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

Send data between sensors and receivers that have different signal types. These cords change the output signal from PNP to NPN.

These cords have an M8 connector on one end and an M12 connector on the other.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

Also known as plenum-rated cords, these CMP ethernet cords have flame-resistant, low-smoke insulation and can be used without conduit in duct work and above a drop ceiling.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

Stretch these cords out when you need extra length and their coiled design springs back when it’s not needed to make them smaller.

Connect devices such as computers, printers, and mobile devices.

With Kevlar-reinforced armor, these USB cords stand up to frequent use and bending better than standard USB cords.