Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors. A threaded housing securely mates with other mini connectors and won’t come loose from shaking or vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors.

Connectors with a 0.87" face diameter have the highest current ratings, so you can use them for heavier duty industrial machinery such as cooling fans, grinders, and conveyor systems. The plugs and sockets have a rubber cable outer insulation, which resists oil, water, and weld slag. This makes them a good choice for wet and harsh industrial environments.

Receptacles thread into panels and walls, so they work well in stationary or permanent installations.

When mated, these connectors meet IP or NEMA ratings. IP68 and NEMA 6P rated connectors protect against dust, submersion, washdowns, and weather.

Caps protect connectors and maintain their IP and NEMA ratings when not in use.

For technical drawings and 3-D models, click on a part number.

Simplify wiring and reduce the number of cords in your automation setup. These splitters create a branch off a main cord or connect multiple devices with a mini connection to a single port in a junction box or I/O module. A threaded housing securely mates with other mini connectors to keep out contaminants and won’t come loose from shaking or vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors.

When mated, these connectors meet IP68 and NEMA 6P for protection against dust, submersion, washdowns, and weather.

Caps protect connectors and maintain their IP and NEMA ratings when not in use.

Thread adapters connect plugs and sockets that both have internal threads.

For technical drawings and 3-D models, click on a part number.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.

A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. S-coded connectors work with AC devices and are often used on frequency converters, robotics, and relays. T-coded connectors work with DC devices and are often used on passive distribution boxes and to power IO Link modules.

Receptacles thread into panels and walls, making them best for stationary or permanent installations such as control panels. 90° elbow connectors run your cord along the side of equipment, so they fit behind machines and in tight spaces.

Connectors with screw terminals hold wire by tightening a screw.

Connectors with polyurethane or TPE insulation resist chemicals and UV rays. Because they stand up to bending, they’re good for jobs with continuous motion. Polyurethane also resists oil and is halogen free, which can corrode metal and is dangerous to inhale.

When mated, all connectors are IP rated to seal out dust. IP65 connectors can be lightly rinsed. IP67 and IP68 rated connectors can withstand brief submersion. NEMA 12 rated connectors can also be splashed with water, oil, and coolant.

Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.

Note: Sockets and female receptacles may have extra holes on their face that are not used.

For technical drawings and 3-D models, click on a part number.

Minimize signal loss between low-current devices with M8 connections. The shielding on these connectors reduces signal interference from nearby devices, such as motors and speed controls. Also known as pico connectors, M8 connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

To view wiring diagrams, select a part number and click Product Detail.

Receptacles thread into panels and walls, so they work well in stationary or permanent installations.

IP or NEMA rated when mated, all seal out dust. IP68 rated connectors withstand submersion. NEMA 6P rated connectors protect against weather, washdowns, corrosion, and submersion.

For technical drawings and 3-D models, click on a part number.

Made with industry standard barrel-style ends, these connectors carry DC power between electronic devices and power supplies.

Housing Connection—Pair connectors that have the same type of housing connection. Push-in connectors are quick to connect and disconnect. Screw-together connectors take longer to connect, but are more secure. They’re good for preventing power loss if vibration might loosen the connection or the connector could get yanked out.

Wire Connection—Choose based on your application. Solder connections are the most secure and permanent connection.

IP68-Rated Connectors—Create a sealed connection when the plug and socket, receptacle, or adapter are also IP68 rated. All are dust tight, even when there’s continuous airflow. They also withstand submersion in water for more than 30 minutes.

Receptacles—Mount them in a panel. Receptacles with an off (Normally Open) circuit position turn equipment on when you plug in a device.

For technical drawings and 3-D models, click on a part number.