Electrical Plugs for 27 Wire Gauge

Filter by

Gender

Computer Connection Type

For Wire Gauge

Wire Connection Method

Shape

Number of Poles

Electrical Connection Component

Shielding

Housing Material

Application

Wire Connection

Color

Housing Finish

REACH Compliance

Electrical Connection

RoHS Compliance

DFARS Compliance

System of Measurement

Mounting Location

Length

Current

Voltage

Component

Forward

How can we improve?

106 Products

Build-Your-Own Molex Compact Connectors

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes.

Insertion tools (sold separately) are helpful for assembling small wires.

Extraction tools (sold separately) release the locking mechanism on pins and sleeves to remove them from housings.

Crimpers (sold separately) are required for wire installation. They ratchet to ensure the correct pressure is applied to every crimp.

For technical drawings and 3-D models, click on a part number.

Pins and Sleeves

Sleeve

					Pins			Sleeves
Voltage	Current	For Wire Gauge	Wire Connection Type	Pkg. Qty.	Pin Dia.		Pkg.	For Pin Dia.		Pkg.
Molex Standard .062"
250V AC	5A	30-24	Crimp On	100	0.062"	000000000	00000	0.062"	000000000	00000

Insertion Tools

For Pin Dia.	For Wire Gauge	Color		Each
0.062"	30-18	Black	00000000	000000

Extraction Tools

For Pin Dia.	For Wire Gauge	Color		Each
0.062"	30-18	Red	00000000	000000

Ratcheting Crimpers

For Pin Dia.	For Wire Gauge	Color		Each
0.062"	30-24	Red	00000000	0000000

Servomotor M23 Connectors

Plug

Socket

Receptacle

Receptacle
with
Mounting Holes

Use these connectors with servomotor, servocontrollers, and servodrives in automated equipment and assembly lines. Rated NEMA 4X, IP67, and IP69K, they resist corrosion and protect against high-pressure, high-temperature washdowns. When mating connectors, the gender, housing thread location, and pole layout must be opposite. Poles are numbered on the face of the connector.

Signal connectors communicate between servocontrollers, servodrives, and servomotors.

For technical drawings and 3-D models, click on a part number.

Signal Connectors—Solder

Poles are Numbered
Clockwise
(12 Pole Shown)

Poles are Numbered
Counterclockwise
(12 Pole Shown)

12 Pole

16 Pole

17 Pole

19 Pole

Connectors
		Low-Current			High-Current									Replacement Housings		Replacement Inserts
No. of Poles	Pole Layout	No. of Poles	Current	For Wire Gauge	No. of Poles	Current	For Wire Gauge	Voltage	For Cable OD	OD	For Panel Cutout Dia.		Each		Each		Each
Plug—External Thread
12	Clockwise	12	8A	28-17	__	__	__	200V AC/200V DC	0.12"-0.67"	1"	__	0000000	000000	0000000	000000	0000000	000000
12	Counterclockwise	12	8A	28-17	__	__	__	200V AC/200V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
16	Clockwise	16	8A	28-17	__	__	__	160V AC/160V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
17	Clockwise	17	8A	28-17	__	__	__	160V AC/160V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
19	Clockwise	16	8A	28-17	3	10A	28-17	100V AC/100V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
Socket—Internal Thread
12	Clockwise	12	8A	28-17	__	__	__	200V AC/200V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
12	Counterclockwise	12	8A	28-17	__	__	__	200V AC/200V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
16	Counterclockwise	16	8A	28-17	__	__	__	160V AC/160V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
17	Counterclockwise	17	8A	28-17	__	__	__	160V AC/160V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
19	Counterclockwise	16	8A	28-17	3	10A	28-17	100V AC/100V DC	0.12"-0.67"	1"	__	0000000	00000	0000000	00000	0000000	00000
Receptacle—External Thread
12	Clockwise	12	8A	28-17	__	__	__	200V AC/200V DC	__	__	1"	0000000	00000	0000000	00000	0000000	00000
12	Counterclockwise	12	8A	28-17	__	__	__	200V AC/200V DC	__	__	1"	0000000	00000	0000000	00000	0000000	00000
16	Clockwise	16	8A	28-17	__	__	__	160V AC/160V DC	__	__	1"	0000000	00000	0000000	00000	0000000	00000
19	Clockwise	16	8A	28-17	3	10A	28-17	100V AC/100V DC	__	__	1"	0000000	00000	0000000	00000	0000000	00000
Receptacle with 4 Mounting Holes—External Thread
12	Clockwise	12	8A	28-17	__	__	__	200V AC/200V DC	__	__	0.79"	0000000	00000	0000000	00000	0000000	00000
12	Counterclockwise	12	8A	28-17	__	__	__	200V AC/200V DC	__	__	0.79"	0000000	00000	0000000	00000	0000000	00000
16	Clockwise	16	8A	28-17	__	__	__	160V AC/160V DC	__	__	0.79"	0000000	00000	0000000	00000	0000000	00000
17	Clockwise	17	8A	28-17	__	__	__	160V AC/160V DC	__	__	0.79"	0000000	00000	0000000	00000	0000000	00000
19	Clockwise	16	8A	28-17	3	10A	28-17	100V AC/100V DC	__	__	0.79"	0000000	00000	0000000	00000	0000000	00000

Caps

Protect M23 connectors when not in use.

Thread
Size	Pitch, mm	Material		Each
External Thread
M23	1	Nickel-Plated Brass	0000000	000000
Internal Thread
M23	1	Nickel-Plated Brass	0000000	0000

D-Sub Connectors

Straight

90° Elbow

DB9

DB15

DB25

DB37

DB50

HD15

Assemble DB and HD connectors to replace worn out connectors.

Shielded connectors prevent electromagnetic interference.

Connectors with a terminal block wire connection have a contact point inside each hole to create a connection without the need for solder or crimping tools.

90° elbow connectors sit flush against equipment to fit in tight spaces.

Crimpers (sold separately) are required for wire installation for crimp-on connectors. They ratchet to ensure the correct pressure is applied to every crimp.

Use extraction tools (sold separately) to remove the pins after crimping.

Straight Connectors—Solder Connection

DB9
For Wire Gauge	Housing Material		Each
Unshielded Plug
30-20	Plastic	0000000	00000
Unshielded Socket
30-20	Plastic	0000000	0000
Shielded Plug
30-20	Nickel-Plated Zinc	0000000	0000
Shielded Socket
30-20	Nickel-Plated Zinc	0000000	0000
DB15
Unshielded Plug
30-20	Plastic	0000000	0000
Unshielded Socket
30-20	Plastic	0000000	0000
Shielded Plug
30-20	Nickel-Plated Zinc	0000000	0000
Shielded Socket
30-20	Nickel-Plated Zinc	0000000	0000
DB25
Unshielded Plug
30-20	Plastic	0000000	0000
Unshielded Socket
30-20	Plastic	0000000	0000
Shielded Plug
30-20	Nickel-Plated Zinc	0000000	00000
Shielded Socket
30-20	Nickel-Plated Zinc	0000000	00000
DB37
Unshielded Plug
30-20	Plastic	0000000	0000
Unshielded Socket
30-20	Plastic	0000000	0000
Shielded Plug
30-20	Nickel-Plated Zinc	0000000	00000
Shielded Socket
30-20	Nickel-Plated Zinc	0000000	00000
DB50
Unshielded Plug
28-20	Plastic	00000000	00000
Unshielded Socket
28-20	Plastic	00000000	00000
Shielded Plug
28-20	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-20	Nickel-Plated Zinc	00000000	00000
HD15
Unshielded Plug
30-20	Plastic	0000000	0000
Unshielded Socket
30-20	Plastic	0000000	0000
Shielded Plug
30-20	Nickel-Plated Zinc	0000000	0000
Shielded Socket
30-20	Nickel-Plated Zinc	0000000	0000

Straight Connectors—Crimp-On Connection

DB9
For Wire Gauge	Housing Material		Each
Unshielded Plug
28-24	Plastic	00000000	00000
Unshielded Socket
28-24	Plastic	00000000	0000
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000
DB15
Unshielded Plug
28-24	Plastic	00000000	0000
Unshielded Socket
28-24	Plastic	00000000	0000
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000
DB25
Unshielded Plug
28-24	Plastic	00000000	0000
Unshielded Socket
28-24	Plastic	00000000	0000
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000
DB37
Unshielded Plug
28-24	Plastic	00000000	00000
Unshielded Socket
28-24	Plastic	00000000	00000
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000
DB50
Unshielded Plug
28-24	Plastic	00000000	00000
Unshielded Socket
28-24	Plastic	00000000	00000
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	00000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000

Replacement Pins for DB9, DB15, DB25, and DB37 Straight Crimp-On Plugs (Pkg. of 50)	Pkg.	000000
Ratcheting Crimper for DB9, DB15, DB25, and DB37 Straight Crimp-On Connectors	Each	000000
Extraction Tool for DB9, DB15, DB25, and DB37 Straight Crimp-On Connectors	Each	00000
Replacement Sleeves for DB9, DB15, DB25, and DB37 Straight Crimp-On Sockets (Pkg. of 50)	Pkg.	00000

Straight Connectors—Terminal Block Connection

		DB9		DB15		DB25
For Wire Gauge	Housing Material		Each		Each		Each
Unshielded Plug
28-24	Plastic	00000000	000000	00000000	000000	00000000	000000
Unshielded Socket
28-24	Plastic	00000000	00000	00000000	00000	00000000	00000

90° Elbow Connectors—Solder Connection

		DB9		DB15		DB25
For Wire Gauge	Housing Material		Each		Each		Each
Shielded Plug
28-20	Nickel-Plated Zinc	00000000	000000	00000000	000000	00000000	000000
Shielded Socket
28-20	Nickel-Plated Zinc	00000000	00000	00000000	00000	00000000	00000

90° Elbow Connectors—Crimp-On Connection

		DB9		DB15		DB25
For Wire Gauge	Housing Material		Each		Each		Each
Shielded Plug
28-24	Nickel-Plated Zinc	00000000	000000	00000000	000000	00000000	000000
Shielded Socket
28-24	Nickel-Plated Zinc	00000000	00000	00000000	00000	00000000	00000