Connect equipment and devices to a power supply.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

The insulation on these cords resists water, so they can be used outdoors.

Designed for indoor applications, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Power multiple devices with one extension cord.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Often used in offices and workstations, these outlet strips power multiple devices from a single wall outlet.

The power switch to these outlet strips is on an extension cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Mount these outlet strips to a desktop or workbench with the mounting hardware, or set them on a surface.

No need for mounting hardware—these outlet strips have magnets on the back to stick to steel walls, cabinets, and other magnetic surfaces.

Use this general purpose cable to supply power to equipment.

The insulation resists corrosive chemicals and salt water, and the wires in this cable are tin plated for corrosion resistance.

For high-heat applications such as furnaces and ovens, this cable's insulation withstands temperatures of 390° F and higher.

Often used in automated applications such as robotics and cable carriers, this cable withstands continuous motion without degrading data or signal transmission.

Use this cable without conduit in automated applications—it meets crush and impact requirements for exposed runs in cable carriers, and withstands continuous motion without degrading data or signal transmission.

Connect servocontrollers and servomotors in automated equipment and on assembly lines. This cable withstands continuous motion without degrading data or signal transmission.

This cable meets TC-ER crush and impact requirements for exposed runs in cable trays, so it can be used without conduit. It sends signal and data to operate, measure, or regulate automated equipment.

Also known as festoon cable, this flat cable fits in confined spaces such as overhead cranes and hoists. It sends signal and data to operate, measure, or regulate automated equipment.

Nearly two-thirds the diameter of standard control cable, this cable fits in tight spaces. It sends signal and data to operate, measure, or regulate automated equipment.

The metal armor on this cable acts as conduit to protect the internal wires. It's often used along the exterior of walls to carry power to outlet boxes. Also known as MC cable.

Rated for in-wall installation, this cable carries power to wall outlets. Also known as branch circuit wire.

This cable is approved for use in vertical shafts and large facilities with multiple levels. It's often used for low-current circuits such as intercoms and security systems.

Also known as hook-up wire, this wire is primarily used for wiring electrical panels, lighting, and plant floor equipment.

Maintain a supply of Mil. Spec. wire in multiple colors.

Even at 480° F—hotter than some industrial ovens—this wire’s insulation won’t melt.

Our most chemical-resistant wire—the PTFE insulation protects against most chemicals, solvents, and oil.

Nearly half the diameter and up to 40% lighter than standard wire of the same gauge and voltage, this wire fits in tight spaces.

Originally designed to meet the quality standards of the auto industry, this wire withstands high temperatures, flames, and abrasion.

Often found in older vehicles, this fusible link wire protects a circuit in applications where you can’t use a standard fuse.

Use this wire in automated applications that require 14,000 volts A/C or greater. It withstands continuous motion without degrading data or signal transmission.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.