About Structural Adhesives
More
About Paint and Protective Coatings
More
Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/737/7370a39-74695a71c11580228731-p9@halfx_637158041691926908.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
3M DP460EG and DP4XLEG also require a plunger to dispense.
Loctite® ES1001™, ES1902™, and ES2500™ come with a mixer nozzle.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
DP270 | 1.64 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |
DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 00000 | |
DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Black | 00000000 | 000000 |
DP460EG | 1.69 | Thick Liquid | 110 min. | 7 days | 510 | Not Rated | 0° to 175° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
DP4XLEG | 1.69 | Thick Liquid | 5 hrs. | 7 days | 670 | Not Rated | -40° to 120° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Off-White | 00000000 | 00000 |
Loctite® Compounds—Extra Hard | ||||||||||||
3336 | 1.4 | Thick Liquid | 15 min. | 24 hrs. | Not Rated | Not Rated | -65° to 350° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Amber | 0000000 | 00000 |
E-60NC | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 6.8 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
E-60NC | 13.5 | Thick Liquid | 60 min. | 24 hrs. | 550 | Not Rated | -65° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 00000 |
ES1001 | 1.7 | Thick Liquid | 60 min. | 24 hrs. | 1,100 | 0.29 | -10° to 220° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Black | 0000000 | 00000 |
ES1902 | 1.7 | Thin Liquid | 60 min. | 24 hrs. | 1,350 | Not Rated | -40° to 250° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic | Clear | 0000000 | 00000 |
ES2500 | 1.7 | Thin Liquid | 10 min. | 16 hrs. | 410 | 0.28 | -40° to 220° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Black | 0000000 | 00000 |
Mixer Nozzle for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 20) | 00000000 | Each | 0000 |
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 16) | 0000000 | Each | 0000 |
Plunger for 1.69 fl. oz. 3M DP460EG Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
Mixer Nozzle for 6.8 fl. oz. and 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 0000 |
Dispensing Gun for 6.8 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Plunger for 1.4 fl. oz. Loctite Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 1.4 fl. oz. Loctite Cartridges | 0000000 | Each | 00000 |
Dispensing Gun for 1.7 fl. oz. Loctite Cartridges | 00000000 | Each | 00000 |
Mixer Nozzle for 1.7 fl. oz. Loctite E-60NC Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. Loctite Cartridges | 0000000 | Each | 000000 |
Optically Clear Epoxy Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Loctite® ES1901™ comes with a mixer nozzle.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Extra Hard | |||||||||||
ES1901 | 1.7 | Thick Liquid | 3 | 24 | 400 | Not Rated | -40° to 220° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Clear | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Urethane Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7369a33p1-b05-digital@halfx_637073798896878909.png?ver=imagenotfound)
Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation. Use a gun (sold separately) with the included mixer nozzle to dispense.
US2350™ also require a 4:1 plunger (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Compounds—Medium Hard | |||||||||||
US2350 | 1.69 | Thick Liquid | 90 | 24 | 950 | 0.51 | -40° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Black | 0000000 | 000000 |
Loctite® Compounds—Soft | |||||||||||
US2651 | 6.76 | Thin Liquid | 10 | 16 | 1,050 | Not Rated | -85° to 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite | Amber | 0000000 | 00000 |
Adjustable-Flexibility Heat-Transfer Potting Compounds
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-jar-digital@halfx_637074242066702698.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/756/7563a52p1-b05-digital@halfx_637073782957202076.png?ver=imagenotfound)
Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
The size listed is the combined total of the two parts.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Hardness Rating | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Heating Requirements to Reach Full Strength | For Use On | Color | Each | |
Jar Compounds | ||||||||||||
12 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 0000000 |
24 | Thick Liquid | 30 | 24 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1 | -100° to 450° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 000000 |
Jar and Syringe Compounds | ||||||||||||
1.6 | Thick Liquid | 30 | 26 | Extra Hard, Medium Hard, Medium Soft, Soft | 450 | 1.01 | -100° to 450° | 2 hrs. @ 250° F | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass | Tan | 000000 | 00000 |
Heat-Transfer Potting Compounds
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Cartridge potting compound requires a gun and mixer nozzle (each sold separately) to dispense.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
1.7 | Thick Liquid | 15 | 8 | 520 | 1.01 | -40° to 210° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Plastic, Composites, Fiberglass | Black | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
Conductive Surface Fillers for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7661a14p1-b05-digital@halfx_636900018319911030.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/736/7365a44p1-g01e-digital@halfx_636900023382010731.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/glo/global-twopart-jar-digital@halfx_636900029123252869.png?ver=imagenotfound)
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. Product regulations restrict sales to the listed jurisdictions/areas.
Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.
Surface filler in a pen dispenses as a thin, ready-to-use liquid that fills in pitting and small gaps. It’s often used on circuit boards to fix components or to prototype new systems.
Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Surface Resistivity, ohms/sq. | Mix Ratio | Min. | Max. | For Use On | Cannot Be Sold To | Each | |
Loctite® Surface Fillers | |||||||||||||||
3888 | __ | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 1.44 | 0.001 | __ | 100:6 | -40° | 170° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic | __ | 0000000 | 000000 |
Surface Fillers | |||||||||||||||
__ | __ | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | __ | 0000000 | 00000 |
__ | __ | 0.35 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | __ | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | __ | 0000000 | 000000 |
__ | 0.2 | __ | Pen | 3 min. | 60 min. | Not Rated | __ | 0.050 | __ | -65° | 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | Outside United States and Canada | 0000000 | 00000 |
__ | 0.5 | __ | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | __ | 0000000 | 000000 |
__ | 1 | __ | Jar | 4 hrs. | 5 days | 5.77 | 0.0004 | __ | 1:1 | Not Rated | 300° | Aluminum, Brass, Copper, Steel, Stainless Steel | __ | 0000000 | 000000 |
Conductive Adhesives for Electronics
An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.
Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7661a14p1-b05-digital@halfx_637048230112101396.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/759/7595a32-@halfx_637061215975361365.png?ver=imagenotfound)
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Weight, oz. | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Surface Resistivity, ohms-cm | Mix Ratio | Consistency | Temp. Range, °F | For Joining | Each | |
One-Time-Use Packet | |||||||||||
__ | 0.09 | 3 hrs. | 24 hrs. | 1.55 | 0.05 | 1:1.15 | Paste | -75° to 230° | Ceramic, Glass, Metal | 0000000 | 000000 |
Can | |||||||||||
0.5 | __ | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Metal | 0000000 | 000000 |
1 | __ | 4 hrs. | 5 days | 7.93 | 0.0004 | 1:1 | Paste | 80° to 265° | Metal | 0000000 | 000000 |
Toughened Epoxy Structural Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 2,500 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 0000000 |
DP460 | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP100 | 6.76 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
DP190 | 6.76 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | Metal, Plastic, Rubber, Masonry | 0000000 | 000000 |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
DP110 | 6.76 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
DP190 | 6.76 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 00000000 | 00000 |
Mixer Nozzles for Two-Part Adhesive Cartridges
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a93p1-b05-digital@halfx_637046223154031807.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a51p2-b05-digital@halfx_637046248898244236.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a25p1-b05-digital@halfx_637054447671084948.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a59p2-b05-digital@halfx_637054447344879184.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a13p2-b05-digital@halfx_637046123002772994.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a84p1-b05-digital@halfx_637046276407731540.png?ver=imagenotfound)
To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge. Mixing elements help combine the two parts of an adhesive as it flows through the nozzle. A short nozzle with many mixing elements combines adhesive while minimizing the adhesive left in the nozzle after dispensing. Choose a nozzle that matches the connection type, size, and mix ratio of your adhesive cartridge.
A taper tip has a small opening for controlled dispensing.
A step tip allows you to trim the opening to the diameter you need.
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Material | Each | |
Taper Tip | |||||||
---|---|---|---|---|---|---|---|
1.42, 1.69 | 1:1, 2:1, 4:1, 10:1 | 0.07" | 5.9" | 20 | Polypropylene Plastic | 00000000 | 00000 |
Each | ||||||||
---|---|---|---|---|---|---|---|---|
For Cartridge Size, oz. | Mix Ratio | Opening ID | Lg. | Mixing Elements | Mfr. | Material | Each | |
3-Step Tip | ||||||||
6.76, 13.5 | 1:1, 2:1 | 0.12"-0.37" | 7.3" | 18 | __ | Polypropylene Plastic | 0000000 | 00000 |
5-Step Tip | ||||||||
6.76, 13.5 | 1:1, 2:1 | 0.07"-0.21" | 7.3" | 20 | 3M | Polypropylene Plastic | 0000000 | 0000 |
6.76, 13.5 | 1:1, 2:1 | 0.66" | 5" | 20 | 3M | Polypropylene Plastic | 00000000 | 0000 |
Cable Repair Resins
![](/prerenderstable/mvPRE/contents/gfx/imagecache/636/6366k61c1-d01b-digital-master1534181474-p9@halfx_636697603286737946.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/636/6366k44-@halfx_636794450107939178.png?ver=imagenotfound)
Protect and insulate electrical connections, and repair damaged insulation. These two-part resins bond to the insulation of most cable. The size listed is the total of the two parts.
No Gap resins are thin enough to completely fill gaps.
Removable resins remain soft after setting. Use them on splices that need to be accessed later.
MSHA Compliant 30 CFR 7.407 resin meets Mine Safety and Health Administration (MSHA) standards for material quality.
Resin Type | Max. Voltage | Size, oz. | Begins to Harden | Reaches Full Strength | Color | Material | Specifications Met | Certification | Each | |
No Gap | 1,000V AC | 23.8 | 20 min. | 20 hrs. | Green | Polyurethane Rubber | __ | __ | 0000000 | 0000000 |
Removable | 1,000V AC | 12.3 | 60 min. | 24 hrs. | Amber | Polybutadiene Rubber | __ | __ | 0000000 | 00000 |
Removable | 1,000V AC | 21.2 | 60 min. | 24 hrs. | Amber | Polybutadiene Rubber | __ | __ | 0000000 | 000000 |
Flame Retardant | 1,000V AC | 7.5 | 20 min. | 24 hrs. | Black | Polyurethane Rubber | MSHA Compliant 30 CFR 7.407 | MSHA Accepted | 0000000 | 00000 |
Flame Retardant | 1,000V AC | 21.5 | 20 min. | 24 hrs. | Black | Polyurethane Rubber | MSHA Compliant 30 CFR 7.407 | MSHA Accepted | 0000000 | 00000 |
Oil Resistant | 8,000V AC | 3.1 | 16 min. | 8 hrs. | Black | Epoxy | __ | __ | 0000000 | 00000 |
Oil Resistant | 8,000V AC | 7.2 | 16 min. | 8 hrs. | Black | Epoxy | __ | __ | 0000000 | 00000 |
Oil Resistant | 8,000V AC | 14.6 | 16 min. | 8 hrs. | Black | Epoxy | __ | __ | 0000000 | 000000 |