About Powered Nibblers and Powered Cutters
More
Electric Fabric Cutters
Cut straight lines and patterns with the rotary blades on this cutter. It's not for cutting carpet, corrugated material, rubber, plastic, or metal.
Hexagonal blade chops through hard-to-cut fabric.
| For Max. Thick. | Overall Lg. | Blade Material | Blade Size | Blade Shape | Horsepower, hp | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Includes | Each | |
Cutting Pattern—Straight, Left Curves, Right Curves | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Use On Fabric | |||||||||||||
| 1/2" | 9" | Steel | 2 1/4" | Round | 1/10 | 110V AC | 0.7 | 8 | Two Prong | CSA Certified | Built-In Blade Sharpener | 0000000 | 0000000 |
Electric Pliable Sheet Cutters
Straight, Right
Curves, Left Curves
Produce clean edges in a variety of pliable materials. Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut. Blades do not close completely.
For Max. Thick. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wire Cloth | Plastic | Cut Lg. | Overall Lg. | Blade Material | No-Load Strokes per Minute | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||
For Use On Aluminum, Brass, Bronze, Copper, Foam, Nickel, Plastic, Rubber, Stainless Steel, Steel | ||||||||||||
| 3/64" | 1/8" | 2 1/4" | 16" | Steel | 2,500 | 120V AC | 5 | 8 | Two Prong | UL Listed, C-UL Listed | 00000000 | 0000000 |
Smooth-Edge Electric Sheet Metal Cutters
Straight, Right
Curves, Left Curves
A double blade creates two cuts and a 7/32" wide waste strip that peels back, leaving two smooth edges with little distortion. These cutters are also known as slotting shears. To start cuts in the center of material, drill a starting hole.
For Max. Thick. | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Cut Wd. | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Starting Hole Dia. | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Includes | Each | ||
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | |||||||||||||||||
| A | 1/16" | 3/64" | 3/32" | 7/32" | 7" | 14" | Steel | 2,500 | 1/2" | 120V AC | 5 | 8 | Two Prong | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302, CSA Certified, UL Listed | Lubricant, Head-Adjusting Wrench | 0000000 | 0000000 |
For Use On Aluminum, Steel | |||||||||||||||||
| B | 3/64" | 1/32" | 3/64" | 7/32" | 4 1/2" | 15 1/2" | Steel | 2,450 | 7/32" | 20V DC | __ | __ | __ | CSA Certified | Two Batteries, Battery Charger, Bag, Hex Wrench | 0000000 | 000000 |
Electric Sheet Metal Cutters
Straight, Right
Curves, Left Curves
Use to cut patterns in flat material with minimal material loss and less effort compared to manual cutters.
Cutters | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Thick. | Material | Replacement Blades | ||||||||||||||
| Steel | Stainless Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade | Housing | No-Load Strokes per Minute | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | Pair | ||
Cutting Pattern—Straight, Right Curves, Left Curves | ||||||||||||||||
(A) For Use On Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Tin | ||||||||||||||||
| 3/64" | 3/64" | 3/64" | 1 1/8" | 12 1/2" | Steel | Plastic | 4,000 | 120V AC | 3.3 | 8 | Two Prong | UL Listed | 00000000 | 0000000 | 00000000 | 000000 |
(B) For Use On Aluminum, Brass, Copper, Stainless Steel, Steel, Tin | ||||||||||||||||
| 9/64" | 1/16" | 5/32" | 2" | 8 3/8" | Steel | Plastic | 1,600 | 120V AC | 6.2 | 8 | Two Prong | CSA Certified, CSA-US Certified | 0000000 | 000000 | 0000000 | 00000 |
Electric Sheet Metal Cutters for Thin Metal
Straight, Right
Curves, Left Curves
Minimize material loss and edge distortion with these scissor-like cutters that cut metal up to 1/64" thick. Also known as scissor-blade shears, the bottom blade remains stationary while the upper blade moves up and down to cut.
For Max. Thick. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Aluminum | Min. Cut Radius | Overall Lg. | Blade Material | No-Load Strokes per Minute | Switch Type | Voltage | Current, A | Cord Lg., ft. | Plug Type | Specifications Met | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves | |||||||||||||
For Use On Aluminum, Brass, Copper, Iron, Nickel, Steel, Tin | |||||||||||||
| 1/64" | 1/64" | 7" | 16" | Steel | 2,500 | Variable Speed Trigger | 120V AC | 5 | 8 | Two Prong | OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.302, CSA Certified, UL Listed | 0000000 | 0000000 |
Sheet Metal Cutter Drill Attachments
Straight, Right
Curves, Left Curves
Convert your drill into a sheet metal cutter to make quick, low-effort cuts without a separate power tool. Insert the bit on these attachments into your chuck to power the jaws, then slide the telescoping clamp over the drill body to hold them in place. They’re quick to install and remove, so you can switch between cutting and drilling. These attachments have a rotating collar that can turn the cutting head 360° to make cuts at any angle.
Also known as scissor-blade shears, these attachments have a bottom blade that stays in place while the upper blade moves up and down, making clean cuts without deforming edges. If your tool runs at multiple speeds, the jaws do too. Choose a slow speed for curves and corners, or a fast speed for quick, straight cuts. To extend the life of the blades, adjust the clearance between the cutting jaws to suit the thickness of the material you’re cutting.
Made from lightweight aluminum and plastic, these attachments won’t weigh down your tool, so you can make one-handed cuts. Both the width and length of the clamp are adjustable, so they can fit around most corded or cordless drills, including impact drivers. Tighten onto your drill with a thumb screw. They also include spacers for extending the clamp to fit over large drills.
For Max. Thick. | Material | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Stainless Steel | Aluminum | Copper | Blade | Housing | For Max. Drill Speed, rpm | For Drill Chuck Size Range | For Min. Drill Voltage | For Max. Drill Current, A | For Min. Drill Torque, in.-lbs. | Operating Temp. Range, °F | Features | Each | |
Cutting Pattern—Straight, Right Curves, Left Curves, Square | ||||||||||||||
For Use On Aluminum, Copper, Stainless Steel, Steel | ||||||||||||||
| 3/64" | 1/32" | 1/16" | 7/64" | Steel | Aluminum | 2,900 | 1/4"-1/2" | 100V AC, 14V DC | 7 | 300 | 32° to 100° | Rotating Collar, Telescoping Clamp | 0000000 | 0000000 |