Wound, wired, and assembled in the U.S. Also known as C-face motors, they bolt directly to gearboxes, pumps, and other machinery.

Whether you’re switching between jobs or need flexibility during installation, these motors give you a variety of mounting options.

Bolt these motors directly to gearboxes, pumps, and other machinery.

Unlike standard AC motors, these motors have an integrated brake that activates after a power loss to hold your equipment in place. Mount their base to flat surfaces.

When these motors lose power, a brake engages to hold your equipment’s position, unlike standard AC motors. Mount them from the base or face.

Bolt these motors directly to conveyors and other machines to power equipment on food and sanitary lines.

With two location options for any-angle mounting, you can put these DC motors to work in a variety of equipment configurations.

With a built-in controller and driver, these stepper motors come ready to program and operate.

To precisely position loads in automated systems that are frequently rinsed, these stepper motors are IP65 rated to seal out water.

Reduce the size and complexity of your stepper motor setup—these motors have a driver built in, so you don’t need to run cable to a standalone driver.

Route light beams, wire, or tubing through the hollow shaft of these stepper motors when space is tight.

The widest temperature range of any stepper motor we offer—these motors were designed with grease and magnets that are particularly good for temperatures up to 212° F. They also work well in low temperatures down to -40° F.

Simplify your servomotor setup—these servomotors have a built-in drive, removing the need for cable between the motor and drive. They create high torque at low speeds like traditional stepper motors but with greater torque performance and positioning reliability.

Combine the high torque at low speeds that traditional stepper motors are known for with the greater torque performance and positioning reliability of a servomotor.

Convert speed to torque to get the power you need—gearmotors are a motor and speed reducer in one.

Rated IP55 with an epoxy-coated enclosure, these gearmotors drive low-speed, high-torque applications in areas that are subject to low-pressure washdowns.

Power equipment in applications with limited space.

Turn speed into torque with these AC-powered gearmotors—they combine a motor and a speed reducer into one.

Run high-torque, low speed applications in cramped areas that are frequently hosed down. To save space, these transmit motion at a 90° angle from the the body of the motor, so they're positioned alongside equipment when mounted.

Start, stop, reverse direction, and control the speed of these gearmotors from the mounted keypad. These gearmotors are both a motor and speed reducer in one to lower speed while increasing torque.

Precisely drive both linear and rotary motion from one compact system.

With a stepper motor and driver built in, these actuators come ready to use for clamping, sorting, and ejecting tasks.

With an included controller and an integrated stepper motor, these slides are a complete precision motion control system.

Smaller than any other actuator in our offering, these actuators’ short stroke length makes them good for automating fine, precise adjustments.

Prevent dust from circulating while precisely positioning parts for drilling, fastening, assembly, and measuring.

Less than one-third the height of standard electric positioning slides, these slides push and pull small parts in electronics manufacturing, robotics, and other automated processes.