Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments with these threaded rollers. They’re permanently lubricated, a feature often seen in sanitary areas where repeated lubrication could cause contamination. Their lubricant is NSF registered H1 as safe for incidental contact with food. They’re made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. The bearings are sealed and shielded to keep out liquid and make sure the lubricant stays intact. These rollers have a V-groove profile, which allows debris to fall off when they’re mounted on angle rails. They’re also known as cam followers.

Rollers with a standard shoulder have a threaded mounting stud. Thread them directly into a component, or secure them with a nut for through-hole mounting.

Rollers with an adjustable shoulder are also known as eccentric track rollers. They can be moved up and down, and they’re commonly used alongside standard rollers to correct misalignment. Secure them with a nut for through-hole mounting.

For technical drawings and 3-D models, click on a part number.

Support loads while guiding and positioning work with these steel rollers and guide rails.

Rollers with an adjustable shoulder, also known as eccentric rollers, let you move the roller up and down to align with the track. They're often used alongside rollers with a standard shoulder to correct misalignment.

Carbon steel guide rails already have mounting holes drilled.

For technical drawings and 3-D models, click on a part number.