In areas exposed to washdowns, chemicals, and corrosion, install this stainless steel raceway system that has oil-resistant gaskets at the connection points. All components meet NEMA 4X standards for indoor and outdoor protection against corrosion and water projected from a hose.

Raceway has a hinged/screw-on cover that allows you to lay in wire and cable instead of pulling it through. It has heavy duty hinges on one side and screw clamps on the other.

For technical drawings and 3-D models, click on a part number.

Gaskets on the covers and at connection points protect against dust as well as seeping oil and coolant. All components are rated NEMA 12 for indoor use and resistance to falling liquids and light splashing; nonhazardous dust, lint, and fibers; and oil and coolant seepage. They’re also rated IP54 to resist dust and splashing water.

Raceway, 45° elbows, 90° elbows, reducers, and tees have a hinged cover that opens for quick access and allows you to lay in wire and cable instead of pulling it through.

For technical drawings and 3-D models, click on a part number.

With more than one channel, this raceway allows you to separate power and data wiring to prevent signal interference. Surface mount it where you can't get inside walls; it conceals wiring and takes up little space. All components are flame retardant.

Raceway can be cut with a hacksaw. The cover provides quick access to cable.

Two-channel raceway offers two mounting options. For low-voltage applications less than 50 volts AC/DC, it has an adhesive back. Mount the raceway with screws for applications up to 600 volts AC/DC.

For technical drawings and 3-D models, click on a part number.

Surface mount this compact raceway system where you can't get inside walls to run power, data, and control wiring. It conceals wiring and takes up little space. All components are compatible with Wiremold raceway of the same size.

Raceway can be cut with a hacksaw.

Raceway with a snap-on cover provides quick access to wire and cable.

Raceway with a slide-on cover requires a mounting bracket (sold separately)—fasten the bracket to the wall and press the raceway into the bracket.

PVC raceway offers two mounting options. For low-voltage applications less than 30 volts AC/42 volts DC, it has an adhesive back. Mount the raceway with screws (sold separately) for applications up to 600 volts AC/DC.

For technical drawings and 3-D models, click on a part number.

With a top that overhangs the cover, this enclosure-like raceway keeps out rain and is rated NEMA 3R for protection from liquids and light splashing. It's also known as wire trough. Use it to protect short, straight runs of wire and cable. To run wire and cable into and out of raceway, drill holes and pull it through.

Access wire and cable by removing the screw-on cover.

Raceway that includes a bonding stud and grounding stud have added protection against static electricity. Use the bonding stud to prevent static sparking by connecting the raceway to other equipment. Use the grounding stud to draw static away from the raceway via a grounding path. This reduces the risk of fires and shocks due to a short circuit.

For technical drawings and 3-D models, click on a part number.