We will reply to your message within an hour.
More
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
Form elbows and bends with this hose and it will hold its shape without support.
If you’re tight on storage space, this hose compresses down to a small size.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
Let go of this hose and it will spring back out of your way.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
Metal interlocked strips create a rigid, durable hose that stays strong under high temperatures.
Increase or decrease the hose diameter by up to 25% with a two-handed twist.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
Surrounded by a protective plastic spiral, this hose bounces back to its original shape when stepped on and resists wear from being dragged across rough floors.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
The smooth interior prevents dust from getting trapped and building up inside the hose.
This white hose makes dirt and other contaminants easy to spot.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
Hose has a plastic spiral that acts as a wear strip to protect against damage.
Formed by metal interlocked strips, this hose has the strength to stand up to sharp, abrasive materials.
The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.
The neoprene coating on this hose withstands continuous motion without weakening.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
Hose meets UL 94 V-2 for flame retardance.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
Step on or drive over this hose without causing damage.
Run water, mist, oil, and other liquids through this hose.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.