Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

Permanently and securely install these self-clinching bearings into panels, with no need for precision-bored holes or machined mounts.

Made of thermoplastic, these bearings conduct electricity to prevent static buildup in moving equipment.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels.

To ensure compatibility with other parts, the materials and dimensions of these bearings meet strict military standards. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

An aluminum shell adds strength.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

The oil in these bearings is suitable for incidental contact with food.

The materials and dimensions of these bearings meet strict military standards to ensure compatibility with other parts. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Good for underwater applications, these bearings won’t swell or warp when wet.

Also known as Oilite® bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.

For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.

Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.

Use these bearings where high speed and precision are not required.

Mount these bearings onto a hex shaft.

With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.

The flange ensures proper positioning inside a tube or housing.

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.

With thinner inner and outer rings, these bearings keep your machines more compact than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing. Mounting holes on the rings allow for fastening onto hollow joints and shafts.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

A bolt in each corner makes for a secure, even hold.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Use these bearings in corrosive environments and under water.

The tapered rollers in these bearings support large shafts at high static loads.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

Use these bearings in corrosive environments and under water.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.

Made of high-performance plastic, these insert bearings last longer than metal insert bearings. They also don’t require lubrication.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Combine these bearings with a ball spline to create a compact linear and rotary motion system for applications with fast, complex movements, such as robotics.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.