About Plastic
More
About Lubricants
More
Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/138/1380k29p1-g02a-digital@halfx_637032674322908549.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/129/1298k76p2-g02a-digital@halfx_637032260430712774.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/461/46125t7p1-g02a-digital@halfx_637033012091368151.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/140/1404k24p1-g02a-digital@halfx_637033023343580473.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/137/1378k35p1-g02a-digital@halfx_637032673395623252.png?ver=imagenotfound)
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with oil are thin and won’t stain. Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with silicone are clear, have excellent water resistance, and can be used on most rubber and plastic. Lubricants with graphite have good heat and wear resistance. Apply lubricant in a can with an HVLP sprayer. Lubricants with PTFE can be used on most rubber and plastic surfaces. Aerosol can with a flip-up straw has a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense as a spray. Lubricants with boron nitride resist corrosion from salt water and won’t wash off. Lubricants with ceramic are often used in extreme-temperature applications, such as welding, metal processing, and glassmaking. Dilute 1-gallon pail with water before using.
CRC 3-36 Ultra Lite dries out electronic components and dries to form a water-repellent seal.
DuPont Molykote 557 Silicone Dry Film is often used on blades to keep them sharp longer. DuPont Molykote D-321 R Anti-Friction withstands extreme temperatures and is long lasting.
Dri Slide lubricants have good corrosion resistance. Use Dri Slide EP Liquid Grease for extreme-pressure applications, such as with open gears and dies, wire drawing, and stamping.
Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Each | |
CRC 3-36 Ultra Lite | |||||||
__ | 11 oz. | Aerosol Can | Oil | -40° to 300° | Outside United States | 0000000 | 000000 |
DuPont Molykote 557 Silicone Dry Film | |||||||
11 oz. | __ | Aerosol Can | Silicone | -40° to 110° | __ | 0000000 | 00000 |
DuPont Molykote D-321 R Anti-Friction | |||||||
__ | 9.3 oz. | Aerosol Can | Moly, Graphite | -290° to 840° | __ | 0000000 | 00000 |
DuPont® Non-Stick Dry Film Lubricant | |||||||
__ | 14 oz. | Aerosol Can | Boron Nitride | -100° to 480° | __ | 00000000 | 00000 |
Dri Slide EP Liquid Grease | |||||||
__ | 8 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
Dri Slide Multi-Purpose | |||||||
__ | 5 1/4 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
4 fl. oz. | __ | Squeeze Bottle | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
32 fl. oz. | __ | Jug | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
1 gal. | __ | Jug | Moly, Graphite | -20° to 750° | __ | 0000000 | 000000 |
WD-40 Specialist Dry Lube | |||||||
__ | 10 oz. | Aerosol Can | PTFE | -50° to 500° | Outside United States | 0000000 | 00000 |
Lubricants | |||||||
__ | 11 oz. | Aerosol Can | Moly | -30° to 650° | Outside United States | 0000000 | 00000 |
__ | 13 oz. | Aerosol Can | Boron Nitride, Ceramic | 32° to 1560° | __ | 00000000 | 00000 |
1 gal. | __ | Can | Graphite | -75° to 450° | __ | 0000000 | 000000 |
1 gal. | __ | Pail | Boron Nitride, Ceramic | 32° to 1560° | __ | 00000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
CRC 3-36 Ultra Lite | ||||||||
__ | 11 oz. | Aerosol Can | Oil | -40° to 300° | Outside United States | 12 | 00000000 | 0000000 |
DuPont Molykote 557 Silicone Dry Film | ||||||||
11 oz. | __ | Aerosol Can | Silicone | -40° to 110° | __ | 12 | 00000000 | 000000 |
DuPont Molykote D-321 R Anti-Friction | ||||||||
__ | 9.3 oz. | Aerosol Can | Moly, Graphite | -290° to 840° | __ | 12 | 00000000 | 000000 |
DuPont® Non-Stick Dry Film Lubricant | ||||||||
__ | 14 oz. | Aerosol Can | Boron Nitride | -100° to 480° | __ | 6 | 00000000 | 00000 |
Dri Slide EP Liquid Grease | ||||||||
__ | 8 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
Dri Slide Multi-Purpose | ||||||||
__ | 5 1/4 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
4 fl. oz. | __ | Squeeze Bottle | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
32 fl. oz. | __ | Jug | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
1 gal. | __ | Jug | Moly, Graphite | -20° to 750° | __ | 6 | 00000000 | 000000 |
WD-40 Specialist Dry Lube | ||||||||
__ | 10 oz. | Aerosol Can | PTFE | -50° to 500° | Outside United States | 6 | 0000000 | 00000 |
Lubricants | ||||||||
__ | 11 oz. | Aerosol Can | Moly | -30° to 650° | Outside United States | 12 | 00000000 | 000000 |
__ | 13 oz. | Aerosol Can | Boron Nitride, Ceramic | 32° to 1560° | __ | 12 | 000000000 | 000000 |
Long-Life Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOC (volatile organic compounds).
Food Industry Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
Lubricants with silicone can be used with plastic. Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.
Lubricants cannot be sold to the listed areas due to product regulations.
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Sprayon LU 211 Food Grade Dry Silicone | |||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 0000000 | 000000 |
Lubricants | |||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Sprayon LU 211 Food Grade Dry Silicone | ||||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 12 | 0000000 | 0000000 |
Lubricants | ||||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 0000000 | 000000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |
Dry-Film Lubricants for Chain
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k14p1-g02a-digital@halfx_637032207576505127.png?ver=imagenotfound)
A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.
Lubricants with graphite have good heat and excellent wear resistance. Lubricants with PTFE can be used with most plastics and are chemically inert.
Container | Each | Package | |||||||
---|---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | ||
Sprayon LU 204 Dry Film Graphite Lubricant | |||||||||
__ | 10 oz. | Aerosol Can | Graphite | -40° to 850° | 0000000 | 000000 | 12 | 00000000 | 0000000 |
Sprayon LU 708 High Performance Dry Film Lubricant | |||||||||
__ | 10 oz. | Aerosol Can | PTFE | -40° to 570° | 0000000 | 00000 | 12 | 00000000 | 000000 |
Superior Graphite SLIP Plate No. 1 Dry Film Lubricant | |||||||||
32 fl. oz. | __ | Can | Graphite | -75° to 450° | 0000000 | 00000 | 6 | 00000000 | 000000 |
1 gal. | __ | Can | Graphite | -75° to 450° | 0000000 | 000000 | 4 | 00000000 | 000000 |
Permanent Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/140/1404k24p1-g02a-digital@halfx_637033023343580473.png?ver=imagenotfound)
Also known as antifriction coatings, these slippery coatings cure to provide permanent lubrication. They're made with moly (molybdenum disulfide) for high-load applications, such as hinges, gears, and rods. They fill in surface imperfections for a smooth, dry finish that won’t attract dust.
DuPont Molykote 3402-C Anti-Friction cures when exposed to air. It has excellent corrosion resistance. DuPont Molykote 106 Anti-Friction cures when exposed to heat. Use it for your highest-pressure applications, such as pumps, pistons, bearings, and gears.
Overhead Door Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.
Conveyor Rail and Chute Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.
Product labeling requirements restrict sales to the listed areas.
Powder and Flake Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1285k25p1-g02a-digital@halfx_637032269630752102.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1285k13p1-g02a-digital@halfx_637032233817320481.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/102/10295k29p1-g02a-digital@halfx_637032252940234753.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/129/1290k1p1-g02a-digital@halfx_637032180310435893.png?ver=imagenotfound)
Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity.
Powder lubricants get into hard-to-reach spots, such as locking mechanisms and fastener threads, better than flakes. Lubricant in a can and drum can be used dry or mixed with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity. Lubricant in a tube can be used dry. It has a precision-tip applicator.
Flake lubricants conduct heat and electricity better than powder. Use them dry or mix with oil and grease to increase their load-carrying capacity or improve their ability to conduct heat and electricity.
Container | Each | Package | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Color | Each | Pkg. Qty. | Pkg. | ||
Powder Lubricant | ||||||||||
__ | 1 lbs. | Can | Graphite | -300° to 700° | Silver | 0000000 | 000000 | 12 | 00000000 | 0000000 |
__ | 5 lbs. | Can | Graphite | -300° to 700° | Silver | 0000000 | 00000 | 4 | 00000000 | 000000 |
__ | 50 lbs. | Drum | Graphite | -300° to 700° | Silver | 0000000 | 000000 | __ | 000000 | 00 |
0.21 fl. oz. | __ | Tube | Graphite | -75° to 700° | Silver | 0000000 | 0000 | 48 | 00000000 | 000000 |
Flake Lubricant | ||||||||||
__ | 5 lbs. | Can | Graphite | -300° to 700° | Silver | 000000 | 00000 | 4 | 00000000 | 000000 |
__ | 16 oz. | Jar | Graphite | -300° to 700° | Silver | 000000 | 00000 | 12 | 00000000 | 000000 |
High-Pressure Powder Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g02/g02a-generic-bottle-squeeze2-digital@halfx_637033006535727867.png?ver=imagenotfound)
Made of 98% moly, this lubricant withstands pressure up to 500,000 psi and has excellent wear resistance. Apply it to metal surfaces to prevent parts from corroding or sticking.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Additive | Max. Pressure, psi | Temp. Range, °F | Specifications Met | Color | Each | |
DuPont Molykote Z Powder | ||||||||
10 | Squeeze Bottle | Moly | 500,000 | -375° to 750° | SAE AMS-M-7866 | Black | 0000000 | 0000000 |
Solid and Paste Milling, Drilling, and Turning Coolants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g02/g02a-generic-stick1-@halfx_637176217530385720.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g02/g02a-jar-p1-digital@halfx_637032941279696816.png?ver=imagenotfound)
An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Coolant in a stick is solid. Touch it to cutting tools or work surfaces. Coolant in a jar is a paste. It can also be used as a bending and forming paste.
Container | |||||||
---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Weight, oz. | Type | Lg. | Dia. | Compatible With | Each | |
Synthetic Base Oil | |||||||
__ | 1.6 | Stick | 2 1/8" | 1 1/2" | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 00000 |
12 | __ | Jar | __ | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 000000 | 00000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Net Weight, oz. | Type | Lg. | Dia. | Compatible With | Pkg. Qty. | Pkg. | |
Synthetic Base Oil | ||||||||
__ | 1.6 | Stick | 2 1/8" | 1 1/2" | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 50 | 00000000 | 0000000 |
12 | __ | Jar | __ | __ | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
Milling, Drilling, and Turning Coolants for Nearly Dry Machining
![](/prerenderstable/mvPRE/contents/gfx/imagecache/g02/g02a-generic-bottle-squeeze2-digital@halfx_637033006535727867.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/461/46125t7p1-g02a-digital@halfx_637033012091368151.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/124/1242k12p1-g02a-digital@halfx_637032263070036801.png?ver=imagenotfound)
Apply these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
Remove water-based coolants from tools and work surfaces with a mild detergent. They should not be used with magnesium. Remove oil-based coolants with alcohol, methyl ethyl ketone, or a parts washer.
Coolants that cannot be sold to the listed areas are restricted by product labeling requirements.
Container | Each | Package | ||||||
---|---|---|---|---|---|---|---|---|
Size | Type | Compatible With | Cannot Be Sold To | Each | Pkg. Qty. | Pkg. | ||
Water Based | ||||||||
LPS Tapmatic AquaCut | ||||||||
16 fl. oz. | Squeeze Bottle | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 000000 | 12 | 00000000 | 0000000 |
1 gal. | Jug | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 00000 | 4 | 00000000 | 000000 |
5 gal. | Pail | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | Outside United States | 0000000 | 000000 | __ | 000000 | 00 |
Oil Based | ||||||||
Lubricants—Synthetic Base Oil | ||||||||
4 fl. oz. | Squeeze Bottle | Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium | __ | 000000 | 00000 | 36 | 00000000 | 000000 |
Dry-Film Antiseize Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k14p1-g02a-digital@halfx_637032207576505127.png?ver=imagenotfound)
These lubricants dry to form a thin, solvent-resistant film that won't squeeze out or attract dirt. They're made with moly to withstand heavy loads and pressure. They can handle low-speed loads at temperatures up to 745° F and static loads up to 2400° F. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Loctite® LB 8017 Moly Dry Film can also be used with chain and other moving metal parts.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Additive | Temp. Range, °F | Color | Compatible With | Each | |
Loctite® LB 8017 Moly Dry Film | |||||||
1.3 | Can | Moly | -20° to 2400° | Black | Aluminum, Stainless Steel, Steel, Titanium | 0000000 | 0000000 |
10 | Can | Moly | -20° to 2400° | Black | Aluminum, Stainless Steel, Steel, Titanium | 00000000 | 000000 |
Loctite® LB C-200 High Temperature Solid Film | |||||||
1.3 | Can | Moly | -20° to 2400° | Gray | Aluminum, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
No-Residue Mold-Release Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
Lubricants with PTFE create a long-lasting film that withstands high temperatures.
Chemical-Resistant Slippery PTFE Powder
![](/prerenderstable/mvPRE/contents/gfx/imagecache/733/7331n11-@halfx_637539247045521508.png?ver=imagenotfound)
- Color: White
- Temperature Range: -300° to 500° F
- For Use On: Carriages, Multipurpose, Slides, Ways, Track, O-Rings, Seals, Chutes, Guide Rails, Locks
- For Use Outdoors: Yes
Often used in assemblies that rub against each other, this powder blends into plastic, rubber, composites, and lubricants to keep them from sticking. Because it is slippery, it decreases wear and dissipates heat caused by friction—it will not break down in extreme temperatures. It repels water, which keeps rust, dust, and debris from building up and causing abrasion between moving parts. This powder won’t react to most corrosive chemicals, but it will break down when exposed to alkali metal.
Container | ||||
---|---|---|---|---|
Particle Size | Net Weight, lbs. | Type | Each | |
10 microns | 1 | Can | 0000000 | 0000000 |