About Lubricants
More
Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/138/1380k29p1-g02a-digital@halfx_637032674322908549.png?ver=imagenotfound)
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with oil are thin and won’t stain. Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with silicone are clear, have excellent water resistance, and can be used on most rubber and plastic. Lubricants with graphite have good heat and wear resistance. Lubricants with PTFE can be used on most rubber and plastic surfaces. Aerosol can with a flip-up straw has a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense as a spray. Lubricants with boron nitride resist corrosion from salt water and won’t wash off. Lubricants with ceramic are often used in extreme-temperature applications, such as welding, metal processing, and glassmaking.
CRC 3-36 Ultra Lite dries out electronic components and dries to form a water-repellent seal.
DuPont Molykote 557 Silicone Dry Film is often used on blades to keep them sharp longer. DuPont Molykote D-321 R Anti-Friction withstands extreme temperatures and is long lasting.
Dri Slide lubricants have good corrosion resistance. Use Dri Slide EP Liquid Grease for extreme-pressure applications, such as with open gears and dies, wire drawing, and stamping.
Lubricants that cannot be sold outside the United States are restricted by product labeling requirements.
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Each | |
CRC 3-36 Ultra Lite | |||||||
__ | 11 oz. | Aerosol Can | Oil | -40° to 300° | Outside United States | 0000000 | 000000 |
DuPont Molykote 557 Silicone Dry Film | |||||||
11 oz. | __ | Aerosol Can | Silicone | -40° to 110° | __ | 0000000 | 00000 |
DuPont Molykote D-321 R Anti-Friction | |||||||
__ | 9.3 oz. | Aerosol Can | Moly, Graphite | -290° to 840° | __ | 0000000 | 00000 |
DuPont® Non-Stick Dry Film Lubricant | |||||||
__ | 14 oz. | Aerosol Can | Boron Nitride | -100° to 480° | __ | 00000000 | 00000 |
Dri Slide EP Liquid Grease | |||||||
__ | 8 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
Dri Slide Multi-Purpose | |||||||
__ | 5 1/4 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 0000000 | 00000 |
WD-40 Specialist Dry Lube | |||||||
__ | 10 oz. | Aerosol Can | PTFE | -50° to 500° | Outside United States | 0000000 | 00000 |
Lubricants | |||||||
__ | 11 oz. | Aerosol Can | Moly | -30° to 650° | Outside United States | 0000000 | 00000 |
__ | 13 oz. | Aerosol Can | Boron Nitride, Ceramic | 32° to 1560° | __ | 00000000 | 00000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
CRC 3-36 Ultra Lite | ||||||||
__ | 11 oz. | Aerosol Can | Oil | -40° to 300° | Outside United States | 12 | 00000000 | 0000000 |
DuPont Molykote 557 Silicone Dry Film | ||||||||
11 oz. | __ | Aerosol Can | Silicone | -40° to 110° | __ | 12 | 00000000 | 000000 |
DuPont Molykote D-321 R Anti-Friction | ||||||||
__ | 9.3 oz. | Aerosol Can | Moly, Graphite | -290° to 840° | __ | 12 | 00000000 | 000000 |
DuPont® Non-Stick Dry Film Lubricant | ||||||||
__ | 14 oz. | Aerosol Can | Boron Nitride | -100° to 480° | __ | 6 | 00000000 | 00000 |
Dri Slide EP Liquid Grease | ||||||||
__ | 8 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
Dri Slide Multi-Purpose | ||||||||
__ | 5 1/4 oz. | Aerosol Can | Moly, Graphite | -20° to 750° | __ | 12 | 00000000 | 000000 |
WD-40 Specialist Dry Lube | ||||||||
__ | 10 oz. | Aerosol Can | PTFE | -50° to 500° | Outside United States | 6 | 0000000 | 00000 |
Lubricants | ||||||||
__ | 11 oz. | Aerosol Can | Moly | -30° to 650° | Outside United States | 12 | 00000000 | 000000 |
__ | 13 oz. | Aerosol Can | Boron Nitride, Ceramic | 32° to 1560° | __ | 12 | 000000000 | 000000 |
Food Industry Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
Lubricants with silicone can be used with plastic. Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.
Lubricants cannot be sold to the listed areas due to product regulations.
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Sprayon LU 211 Food Grade Dry Silicone | |||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 0000000 | 000000 |
Lubricants | |||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Sprayon LU 211 Food Grade Dry Silicone | ||||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 12 | 0000000 | 0000000 |
Lubricants | ||||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 0000000 | 000000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |
Long-Life Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Nano-sized additives fill small surface imperfections, reducing wear and heat to extend the life of both the lubricant and equipment. These lubricants dry to form a nonstick film that won’t attract dust. They are often used on hinges, gears, and roller chain.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOC (volatile organic compounds).
Overhead Door Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.
Dry-Film Lubricants for Chain
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
A high load-carrying capacity makes these lubricants good for use on chain and moving metal parts. They dry to form a film that lubricates without attracting dust.
Lubricants with graphite have good heat and excellent wear resistance. Lubricants with PTFE can be used with most plastics and are chemically inert.
Conveyor Rail and Chute Dry-Film Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.
Product labeling requirements restrict sales to the listed areas.
No-Residue Mold-Release Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
Lubricants with PTFE create a long-lasting film that withstands high temperatures. Lubricants with silicone have a small amount of silicone for lubricity, but still allow you to paint molded parts without cleaning first. Use these lubricants to release large, intricate, or difficult-to-release parts. Lubricants with zinc resist dust and can be used with ceramics.
Container | Each | Package | ||||||
---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Each | Pkg. Qty. | Pkg. | ||
Sprayon MR 309 Paintable Release Agent | ||||||||
12 | Aerosol Can | Silicone | -40° to 550° | 0000000 | 000000 | 12 | 00000000 | 0000000 |
Sprayon MR 311 Dry Film Release Agent | ||||||||
12 | Aerosol Can | PTFE | -50° to 575° | 0000000 | 00000 | 12 | 00000000 | 000000 |
Lubricants | ||||||||
11 | Aerosol Can | __ | 40° to 400° | 0000000 | 0000 | 12 | 00000000 | 000000 |
12 | Aerosol Can | PTFE | Not Rated to 500° | 0000000 | 00000 | 12 | 00000000 | 000000 |
12 | Aerosol Can | Zinc | 32° to 600° | 0000000 | 0000 | 12 | 00000000 | 00000 |
14 | Aerosol Can | __ | 35° to 450° | 0000000 | 00000 | 12 | 00000000 | 000000 |
Food Industry No-Residue Mold-Release Lubricants
![](/prerenderstable/mvPRE/contents/gfx/imagecache/128/1289k17p1-g02a-digital@halfx_637032673361237310.png?ver=imagenotfound)
Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Use them for molding and casting parts in food-processing and preparation areas, or when molding parts that will be used around food. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.