About Selecting a Mixer
More
Thread-In Air-Powered Mixers for Drums
Thread these mixers into a drum opening for a secure connection. All of the propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing. Adjust the mixing speed with a needle valve.
Mixers with 1 or 4 propellers have collapsible propellers to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid.
Direct-drive mixers operate at high speeds for rapid tank turnover.
Gear-drive mixers turn propellers at low speeds.
Use mixers for thin liquids to blend liquids with a viscosity similar to water and light oils.
Use mixers for thick liquids to blend liquids with a viscosity similar to honey and molasses. They have welded propellers for faster, more thorough mixing than those with set-screw propellers.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k61c1-c04a-digital-master1563893073-p9@halfx_636994718877649066.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k611-@halfx_637371455510129219.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k614--612bb765531601566687-p9@halfx_637371455509271952.png?ver=imagenotfound)
Propellers | Shaft | Air Connection | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
Direct Drive | ||||||||||||||
For Thin Liquids | ||||||||||||||
1/2 | 300-1,750 | 1 | 3 3/4" | 316 Stainless Steel | 29" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 39 5/8" | 29 | 00000000 | 000000000 |
For Thick Liquids | ||||||||||||||
1/2 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
1 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 30" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
Gear Drive | ||||||||||||||
For Thick Liquids | ||||||||||||||
1/2 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
1 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
Includes | Each | |
Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |
Rim-Clamp Air-Powered Mixers for Drums
These mixers have collapsible propellers that fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with a needle valve. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Mixer with four propellers is for faster and more thorough mixing than mixers with one propeller.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k63c1-c04a-digital-master1563894139-p9@halfx_636994729502744969.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k73c1-c04a-digital-master1563969879-p9@halfx_636995512367252273.png?ver=imagenotfound)
Propellers | Shaft | Air Connection | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Max. Clamp Opening | Each | |
For Thin Liquids | |||||||||||||||
1/2 | 350-1,750 | 1 | 3 3/4" | 316 Stainless Steel | 32" | 5/8" | 1/4 | NPT | Female | 25 cfm @ 80 psi | 38 3/8" | 20 | 5" | 00000000 | 000000000 |
1 1/2 | 30-3,000 | 4 | 6" | 304 Stainless Steel | 36" | 1/2" | 1/4 | NPT | Female | 60 cfm @ 80 psi | 43" | 18 | 1" | 00000000 | 00000000 |
Includes | Each | |
Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |
Thread-In/Rim-Clamp Air-Powered Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/350/35005k71c1-c04a-digital-master1563823458-p9@halfx_636994022727957817.png?ver=imagenotfound)
For reduced vibration and noise, this mixer has a clamp in addition to the thread-in connection. Propellers are collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve. Mixer has four propellers for fast and thorough mixing. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Propellers | Shaft | Air Connection | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Max. Clamp Opening | Each | |
For Thin Liquids | |||||||||||||||
1 1/2 | 30-3,000 | 4 | 6" | 304 Stainless Steel | 36" | 1/2" | 1/4 | NPT | Female | 60 cfm @ 80 psi | 42" | 19 | 1" | 00000000 | 000000000 |
Hand-Held Air-Powered Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3476k71c1-c04a-digital-master1563983908-p9@halfx_636995627307440735.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3476k73c1-c04a-digital-master1563979977-p9@halfx_636995587776250732.png?ver=imagenotfound)
These mixers have collapsible propellers that fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as direct-drive mixers, they operate at high speeds for rapid turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing. Choose a mixer with more propellers for faster and more thorough mixing.
Propellers | Shaft | Air Connection | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | ||||||||||||||
1 1/2 | 30 to 3,000 | 3 | 6" | 304 Stainless Steel | 28" | 3/8" | 1/4 | NPT | Female | 60 cfm @ 80 psi | 36" | 16 | 0000000 | 000000000 |
1 1/2 | 30 to 3,000 | 4 | 6" | 304 Stainless Steel | 36" | 1/2" | 1/4 | NPT | Female | 60 cfm @ 80 psi | 41" | 17 | 0000000 | 00000000 |
Rim-Clamp Electric Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/349/3492k75c1-c04a-digital-master1563819921-p9@halfx_636993987527655780.png?ver=imagenotfound)
This mixer has a collapsible propeller that fits through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.
Propellers | Shaft | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Each | |
120/240V AC Single Phase—Wire Leads | ||||||||||||
For Thin Liquids | ||||||||||||
1/2 | 1,725 | 1 | 3 3/4" | 316 Stainless Steel | 33 1/8" | 5/8" | 8.8/4.4 | 60 | 44 3/4" | 37 | 0000000 | 000000000 |
Hazardous Location Rim-Clamp Electric Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/349/3492k75c1-c04a-digital-master1563819921-p9@halfx_636993987527655780.png?ver=imagenotfound)
Motor is UL listed for use in environments with flammable gases and combustible dust. Attach this mixer to the lip of a drum. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Propellers | Shaft | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Environmental Rating | Each | |
120/240V AC Single Phase—Wire Leads | |||||||||||||
For Thin Liquids | |||||||||||||
1/2 | 1,725 | 1 | 3 3/4" | 316 Stainless Steel | 33 1/8" | 5/8" | 8.8/4.4 | 60 | 47 1/2" | 50 | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G | 0000000 | 000000000 |
Thread-In Electric Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/348/3484k59c1-c04a-digital-master1563908810-p9@halfx_636994876434581982.png?ver=imagenotfound)
Thread these mixers into a drum opening for a secure connection. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.
Propellers | Shaft | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Each | |
120/240V AC Single Phase—Wire Leads | ||||||||||||
For Thin Liquids | ||||||||||||
1/2 | 1,725 | 1 | 3 3/4" | 316 Stainless Steel | 29" | 5/8" | 8/4 | 60 | 43" | 39 | 0000000 | 000000000 |
Hazardous Location Thread-In Electric Mixers for Drums
![](/prerenderstable/mvPRE/contents/gfx/imagecache/348/3484k59c1-c04a-digital-master1563908810-p9@halfx_636994876434581982.png?ver=imagenotfound)
Motor is UL listed for use in environments with flammable gases and combustible dust. Screw this mixer into the opening of a drum. The propeller is collapsible to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid. Also known as a direct-drive mixer, it operates at high speeds for rapid turnover. Use it to mix liquids with a viscosity similar to water and light oils. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Propellers | Shaft | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Current, A | Frequency, Hz | O'all Ht. | Wt., lbs. | Environmental Rating | Each | |
120/240V AC Single Phase—Wire Leads | |||||||||||||
For Thin Liquids | |||||||||||||
1/2 | 1,725 | 1 | 3 3/4" | 316 Stainless Steel | 29" | 5/8" | 8/4 | 60 | 45 3/4" | 51 | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G | 0000000 | 000000000 |
No-Mess Drum Mixers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/288/2889t12p1-c04al1547230853@halfx_635477067180000000.png?ver=imagenotfound)
Eliminate spills and splatter by rotating your closed drum to mix its contents. Motor is totally enclosed fan cooled (TEFC) for use in environments with splashing water and dust.
Weight Cap., lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | @ 15 rpm | @ 20 rpm | @ 24 rpm | Current, A | Frequency, Hz | Ht. | Wd. | Dp. | Wt., lbs. | Cord Lg., ft. | Features | Includes | Each | |
120V AC Single Phase—Three-Prong Plug | |||||||||||||||
1/2 | 15-24 | 350 | 300 | 250 | 7.4 | 60 | 20" | 35" | 21" | 175 | 3 | Adjustment Dial | Chain and Guard, Grounding Strap, Two 3" Dia. Casters | 0000000 | 000000000 |
Hazardous Location No-Mess Drum Mixers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/288/2889t12p1-c04al1547230853@halfx_635477067180000000.png?ver=imagenotfound)
Motor is UL listed for use in environments with flammable gases and combustible dust. This mixer eliminates spills and splatter by rotating your closed drum to mix its contents.
Weight Cap., lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | @ 15 rpm | @ 20 rpm | @ 24 rpm | Current, A | Frequency, Hz | Ht. | Wd. | Dp. | Wt., lbs. | Environmental Rating | Features | Includes | Each | |
120/240V AC Single Phase—Wire Leads | |||||||||||||||
1/2 | 15-24 | 350 | 300 | 250 | 7.4/3.7 | 60 | 20" | 35" | 21" | 183 | NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G | Adjustment Dial | Chain and Guard Grounding Strap Two 3" Dia. Casters | 0000000 | 000000000 |
Bronze Proportional Mixers for Coolant and Soluble Oil
![](/prerenderstable/mvPRE/contents/gfx/imagecache/997/9977k1p1-c04a-digital@halfx_636993849121060744.png?ver=imagenotfound)
Use these mixers to dilute coolants and soluble oils with water. They dispense solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the needle valve. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Pipe Size | Thread Type | Gender | Min. Pressure, psi | Pipe Size | Thread Type | Gender | Max. Pressure | Max. Temp., °F | Each | |
15:1 to 45:1 | 5-55 | 2 NPT | 3 | 3/8 | NPT | Female | 25 | 1/2 | NPT | Male | 75 psi @ 70° F | 150° | 000000 | 0000000 |
4:1 to 35:1 | 5-55 | 2 NPT | 3 | 3/8 | NPT | Female | 25 | 1/2 | NPT | Male | 75 psi @ 70° F | 150° | 000000 | 000000 |
Easy-Pour Mixers with Removable Liner
![](/prerenderstable/mvPRE/contents/gfx/imagecache/759/7595tp1l1547230887@halfx_634178245430000000.png?ver=imagenotfound)
A removable polyethylene liner with molded-in blades allows for easy cleaning. Stand is stationary. This mixer has an open-top mixing drum that tilts downward to unload material.
Aluminum Proportional Mixers for Coolant and Soluble Oil
![](/prerenderstable/mvPRE/contents/gfx/imagecache/997/9977k6p1-c04a-digitial@halfx_635996266720000000.png?ver=imagenotfound)
Use this mixer to dilute coolants and soluble oils with water. It dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the regulator knob. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Pipe Size | Thread Type | Gender | Min. Pressure, psi | For Tube ID | Tube Connection Type | Max. Pressure | Max. Temp., °F | Each | |
8:1 to 100:1 | 5-55 | 2 NPS | 4 | 1/2 | NPT | Female | 15 | 1/2" | Push to Connect | 57 psi @ 70° F | 140° | 000000 | 0000000 |
Mobile Easy-Pour Mixers
![](/prerenderstable/mvPRE/contents/gfx/imagecache/766/7666t13p1-c04a-digital@halfx_636994730953886410.png?ver=imagenotfound)
Roll this mixer where you need it. For easy dispensing, it has an open-top mixing drum that tilts downward to unload material.
Wheels | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
hp | Mixer Speed, rpm | Cap., gal. | Current, A | Frequency, Hz | Drum Opening Size | No. of | Dia. | Ht. | Wd. | Dp. | Wt., lbs. | Material | Cord Lg., ft. | Includes | Each | |
120V AC Single Phase—Three-Prong Plug | ||||||||||||||||
For Concrete, Feed, and Seed | ||||||||||||||||
1/2 | 22-25 | 22 | 9.5 | 60 | 15 1/4" | 2 | 10" | 46" | 39" | 28" | 219 | Steel | 1 | Two Mixing Paddles | 0000000 | 000000000 |
Aluminum Proportional Mixers for Soap Solutions
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3478k53p1-c04a-digital@halfx_637001691545587484.png?ver=imagenotfound)
Dilute concentrated detergents and sanitizers. This mixer dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the regulator knob. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Pipe Size | Thread Type | Gender | Min. Pressure, psi | For Tube ID | Tube Connection Type | Max. Pressure | Max. Temp., °F | Each | |
1.75:1 to 35:1 | 5-55 | 2 NPS | 5 | 1/2 | NPT | Female | 15 | 1/2" | Push to Connect | 57 psi @ 70° F | 140° | 0000000 | 0000000 |
PVC Proportional Mixers for Soap Solutions
![](/prerenderstable/mvPRE/contents/gfx/imagecache/347/3478k51p1-c04a-digital@halfx_636993881145724599.png?ver=imagenotfound)
Dilute concentrated detergents and sanitizers. This mixer dispenses solution directly from your drum in a measured ratio. Attach your water line to the inlet and set your desired mixing ratio with the metering screw. The water line connection has a quarter-turn shutoff valve.
Inlet | Outlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mixing Ratio | For Container Cap., gal. | For Drum Opening Size | Flow Rate, gpm | Hose Size | Thread Type | Gender | Min. Pressure, psi | For Tube ID | Tube Connection Type | Max. Pressure | Max. Temp., °F | Each | |
4:1 to 128:1 | 15-55 | 2 NPT | 5 | 3/4 | GHT | Female | 10 | 1/2" | Push to Connect | 125 psi @ 70° F | 150° | 0000000 | 0000000 |