Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Quickly position these sockets on square and external 8-point fasteners.

For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Grip the indentations around the outside of tri-groove fasteners.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

The short Phillips bit on these sockets fits in spaces that screwdrivers can’t and where height clearance is limited.

These sockets are also known as Robertson bits.

These sockets are also known as pin-in-hex or pin-in-socket bits.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Quickly position these sockets on square fasteners.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.

Keep common extension lengths on hand to reach a variety of spots—just attach them to your socket.

Bend these extensions to reach inconveniently located fasteners. These sets include multiple extension lengths, so you can find the right length to reach around obstructions.

The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.

Lock your socket into these extensions to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Turn sockets with a bit screwdriver.

Pivot the head to access fasteners from an angle.

Adapters are set to a specific torque and cannot be adjusted.

Change a standard wrench handle into a ratcheting wrench.

Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.

Bend these extensions around obstructions to access hard-to-reach fasteners.

A magnet holds the socket, making changes quicker.

Lock your socket into the extension to prevent accidental disengagement.

Reach a variety of spots by keeping common extension lengths on hand.

Pull the collar to quickly attach and remove sockets.

Suitable for occasional maintenance work, these sets are imported.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

Grip the indentations around the outside of tri-groove fasteners.

Quickly position these sockets on square fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Tighten or loosen hard-to-reach fasteners with the extra-long bits in these socket sets.

Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Pivot the head to access fasteners from an angle.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

The handle is covered in rubber for a comfortable grip.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.

Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

The 20° offset head provides clearance when reaching over obstructions.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Extend the shaft for additional length.

The L shape provides clearance when reaching over obstructions.

Bend around obstructions to turn hard-to-reach fasteners.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Measure with an accuracy of ±2%.

The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.

Measure with an accuracy of ±7%.

When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.

These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.

Anchor these multipliers for added stability.

These tools are suitable for general shop, maintenance, and automotive work.

Use these tools for general shop applications.

Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.