We will reply to your message within an hour.
Turn sockets from above when there's not room to swing a standard wrench handle.
The ratcheting mechanism turns sockets quickly.
Bend around obstructions to turn hard-to-reach fasteners.
Pivot the head for access to fasteners in tight spots.
Extend the shaft for additional length.
A rubber coating provides a comfortable grip.
The L shape provides clearance when reaching over obstructions.
Position the head anywhere along the handle.
The shaft on these wrenches extends and locks.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
The handle is covered in rubber for a comfortable grip.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
No need to pull the socket off the tool—push a button to release.
When the ratchet head becomes worn or damaged, change it out for a new one.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Turn sockets in the most confined spaces.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
The 20° offset head provides clearance when reaching over obstructions.
Pivot the head to access fasteners in tight spots.
Fasten quickly with these crank-style handles.
Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Measure with an accuracy of ±2%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.
The 25° offset heads give you additional clearance to turn hard-to-reach fasteners.
Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.
Attach a socket to the 1/4" square drive tip to turn hex nuts and hex head screws. When set torque is reached, these drivers signal with an audible click.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
Ratcheting action allows for quick adjustment to machinery and valves in tight spaces. All of these handles have a straight, open socket head for long shafts to pass through.