We will reply to your message within an hour.
Convert from one square drive size to another.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Turn sockets with a bit screwdriver.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Extend your socket's reach.
Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.
Insulated to protect against accidental contact with live electrical circuits, these extensions are tested to 1,000 volts to meet IEC 60900.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
Lock your socket into the extension to prevent accidental disengagement.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Change a standard wrench handle into a ratcheting wrench.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Pivot the head to access fasteners from an angle.
Fit these adapters between your wrench and socket to enable finger tightening.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
A magnet holds the socket, making changes quicker.
Attach to your socket for a longer reach.
Pull the collar to quickly attach and remove sockets.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
Bend these extensions around obstructions to access hard-to-reach fasteners.
Lock your socket into the extension to prevent accidental disengagement..
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.
Attach these adapters to square-drive tools.
Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).