We will reply to your message within an hour.
More
These jobbers'-length bits have the rigidity and length required for most applications.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'- and maintenance-length drill bits.
The short flutes provide increased rigidity for drilling straighter holes than standard extended-length drill bits.
The short flutes on these jobbers'-length bits provide increased rigidity for drilling straighter holes.
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers'-length drill bits.
The parabolic spiral flutes lift chips out of the hole, reducing clogging and improving coolant flow.
Make fast bit changes—all of these bits have the same shank diameter, eliminating the need for different collets to hold each size.
Three cutting edges instead of the typical two enable these bits to drill holes with a smoother finish than other bits.
All have a 1/4"-28 threaded shank which installs directly into the threaded spindle on a compatible drill.
Harder, stronger, and more wear resistant than carbide-tipped steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
The sharp point allows for gradual penetration to reduce friction and eliminate cracking and chipping when drilling in plastic.
Harder, stronger, and more wear resistant than cobalt steel, solid-carbide bits maintain their sharp edges longer. They require rigid toolholding to prevent breakage and should not be used in hand-held drilling applications.
When one end becomes worn, reverse the bit to use the other end.
These bits have short flutes and a sturdy construction which prevent snagging that deforms sheet metal and thin-wall tubing.
Use for drilling in most metal.
For the highest accuracy and longest tool life, these solid-carbide bits are harder, stronger, and more wear resistant than high-speed steel, cobalt steel, and carbide-tipped bits.
Make fast bit changes—each bit has the same shank diameter, eliminating the need for different collets to hold each size.
Also known as reverse-flute bits, the flutes spiral in the opposite direction of other bits. Use in counterclockwise drilling applications such as removing broken screws.
Drill small holes by hand.
Drill and finish holes in a single pass with these dual-purpose tools.