0.377" Shank Size Drill Bits

Filter by

System of Measurement

Drill Bit Size

Length Class

Decimal Size Equivalent

For Use On

Finish

Drill Bit Point Type

Material

Overall Length

Point Angle

Flute Direction

Maximum Drilling Depth

Shank Size

Shank Type

Sold As

Bit Style

USMCA Qualifying

Number of Flutes

Flute Type

RoHS Compliance

REACH Compliance

DFARS Compliance

Specifications Met

Forward

How can we improve?

20 Products

Drill Bits

Cut holes in a variety of metals, from the softest aluminum to the hardest steel.

High-Speed Steel Jobbers' Length

Round Shank

Standard

Split

Our basic drill bit material is also the most versatile. These jobbers' bits have the balance of rigidity and length needed for most applications.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron and titanium.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Standard Point—Good for general purpose drilling. You’ll need to make a pilot hole to center the bit.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes	Specs. Met	Pkg. Qty.		Pkg.
Black Oxide





				Letter Size
				V	0.377"	5"	3.06"	Spiral	Round	0.377"	Split	2	NAS907 Type B	1	00000000	000000
				V	0.377"	5"	3.06"	Spiral	Round	0.377"	Split	2	NAS907 Type B	6	00000000	00000

				Titanium Nitride (TiN) Coated





								Letter Size
								V	0.377"	5"	3.06"	Spiral	Round	0.377"	Split	2	NAS907 Type B	1	0000000	00000

								Titanium Aluminum Nitride (TiAlN) Coated





												Letter Size
												V	0.377"	5"	3.06"	Spiral	Round	0.377"	Split	2	NAS907 Type B	1	0000000	00000

												Uncoated





																Letter Size
																V	0.377"	5"	3.06"	Spiral	Round	0.377"	Standard	2	—	1	00000000	0000

High-Speed Steel Short Length

Round Shank

Split

Our shortest high-speed steel bits, these are the most rigid for drilling the straightest holes. They're also good for tight spaces where longer bits can't fit. Also known as screw-machine and stub-length bits.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank						Each
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes	Specs. Met		1-5	6-Up
Black Oxide





				Letter Size
				V	0.377"	3 1/4"	1.12"	Spiral	Round	0.377"	Split	2	NAS907 Type C	00000000	000000	00000

High-Speed Steel Extended Length

Spiral Flute

Round Shank

Standard

Drill through walls and thick workpieces with our longest high-speed steel bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Standard Point—Good for general purpose drilling. You’ll need to make a pilot hole to center the bit.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Black Oxide





				Letter Size
				V	0.377"	7"	3.81"	Spiral	Round	0.377"	Standard	2	0000000	000000

Cobalt Steel Jobbers' Length

Round Shank

Split

The toughness and wear resistance of cobalt steel in a length that's rigid enough for most applications. Cobalt lasts at least twice as long as high-speed steel. It can also run up to 25% faster at higher temperatures without damaging the bit on hard materials such as nickel.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on tough materials like hardened steel and nickel.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes	Specs. Met		Each
Titanium Nitride (TiN) Coated





				Letter Size
				V	0.377"	5"	3.63"	Spiral	Round	0.377"	Split	2	NAS907 Type J	000000000	000000

				Uncoated





								Letter Size
								V	0.377"	5"	3.06"	Spiral	Round	0.377"	Split	2	NAS907 Type J	0000000	00000

Cobalt Steel Short Length

Round Shank

Split

Combine the toughness and wear resistance of cobalt steel with a short length for drilling the straightest holes. These last twice as long as high-speed steel and can run up to 25% faster at higher temperatures without damaging the bit on hard metals like nickel. Also known as screw-machine and stub-length bits, they fit in tight spaces where longer bits can't.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Uncoated





				Letter Size
				V	0.377"	3 1/4"	1.31"	Spiral	Round	0.377"	Split	2	000000000	000000

Carbide-Tipped Steel Jobbers' Length

Round Shank


Standard	Split

The performance of solid carbide but at a lower price point. These jobbers' bits have the balance of rigidity and length needed for most applications. Like carbide bits, they are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Standard Point—Good for general purpose drilling. You’ll need to make a pilot hole to center the bit.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Uncoated Carbide Tipped





				Letter Size
				V	0.377"	5"	2.9"	Spiral	Round	0.377"	Standard	2	00000000	000000
				V	0.377"	5"	3.1"	Spiral	Round	0.377"	Split	2	000000000	00000

Carbide Jobbers' Length

Round Shank

The hardest and most wear-resistant drill bits you can buy in a length that's rigid enough for most applications. These bits stay sharp at high temperatures and faster speeds for the best performance on hard and difficult-to-machine materials. They last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated bits, especially on materials like hardened steel, iron, and stainless steel.

Uncoated—Excellent for a range of metals, they perform best when used on steel, aluminum, brass, and bronze.

Round Shank—The most common shank type fits in a drill press chuck.

Four-Facet Point—The most accurate point style, it centers the bit without a pilot hole and keeps the bit stable while drilling hard metals.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Titanium Nitride (TiN) Coated





				Letter Size
				V	0.377"	4 1/4"	2.75"	Spiral	Round	0.377"	Four Facet	2	000000000	000000

				Uncoated





								Letter Size
								V	0.377"	4 1/4"	2.2"	Spiral	Round	0.377"	Four Facet	2	00000000	00000

Short-Flute Drill Bits

The rigidity of short-length bits without sacrificing reach. The shallow drilling depth makes these less likely to wobble than bits of the same length, so they stay centered and drill straighter.

Carbide-Tipped Steel Extended Length

Spiral Flute

Round Shank

Split

Drill through walls and thick workpieces with bits that offer the performance of solid carbide but at a lower price point. Like carbide, they are stronger than cobalt and high-speed steel to maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like cast iron and hardened steel, upgrade to carbide for longer life.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Uncoated Carbide Tipped





				Letter Size
				V	0.377"	12"	2.87"	Spiral, Short	Round	0.377"	Split	2	00000000	000000

Chip-Clearing Drill Bits

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. The flutes improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole.

Cobalt Steel Jobbers' Length

Parabolic Flute

Split

Uncoated—Polished to eject chips, these are also known as bright finish bits.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deep holes.

Round Shank—The most common shank type. These fit in the chuck of drill presses and portable drills.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes	Specs. Met		Each
Uncoated





				Letter Size
				V	0.377"	4 7/8"	3.43"	Parabolic	Round	0.377"	Split	2	DIN 338	0000000	000000

Smooth-Finish Drill Bits

With more cutting edges than other drill bits, these cut continuously and consistently for a smoother finish. They also stay centered to produce holes that are straighter and more accurate. However, since there’s less space between the cutting edges, they don’t clear chips as quickly.

Carbide Jobbers' Length

Spiral Flute

Round Shank

Split

Uncoated—Excellent for a range of metals, they perform best when used on steel, aluminum, brass, and bronze.

Round Shank—The most common shank type fits in a drill press chuck.

Split Point—Starts cutting on contact so you don’t need a pilot hole. The point also keeps the bit centered for straight and accurate holes, even with a portable drill.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Uncoated





				Letter Size
				V	0.377"	4 1/4"	2.2"	Spiral	Round	0.377"	Split	3	0000000	0000000

Drill Bits for Hardened Steel

Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits.

Carbide Short Length

Straght Flute

Our shortest and most rigid bits are also the hardest and most wear resistant. They stay sharp at high temperatures and faster speeds for the straightest holes in hard and difficult-to-machine materials. Used in manufacturing and CNC drilling, they last 10 to 20 times longer than their closest alternative, cobalt steel. Carbide can be brittle, however, so these bits require a rigid machine tool holder to prevent breakage and should not be used in hand drilling applications.

Uncoated—Excellent for a range of metals, they perform best when used on steel, aluminum, brass, and bronze.

Straight Flute—Withstand heavy pressure without slipping when drilling hardened steel and other tough materials.

Round Shank—The most common shank type fits in a drill press chuck.

Four-Facet Point—The most accurate point style, it centers the bit without a pilot hole and keeps the bit stable while drilling hard metals.

						Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Flute Type	Type	Size	Drill Bit Point Type	No. of Flutes		Each
Uncoated





				Letter Size
				V	0.377"	3"	1"	Straight	Round	0.377"	Four Facet	2	00000000	000000

Drill Bits for Plastic

The precision-ground, 60° point penetrates gradually to prevent cracking and chipping. It also reduces heat that can deform the material. Use these bits for drilling into acrylic, laminate, and other plastics.

High-Speed Steel Jobbers' Length

Our basic drill bit material is also the most versatile. These jobbers' bits have the balance of rigidity and length needed for most applications.

					Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Type	Size	Point Angle	Drill Bit Point Type	No. of Flutes	Flute Type		Each
Uncoated





				Letter Size
				V	0.377"	5"	2.75"	Round	0.377"	60°	Standard	2	Spiral	000000000	000000

Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Cut clean holes in abrasive material without fraying or delaminating the surface. Made of carbide, these bits resist wear to retain a sharp edge, even after after hundreds of cuts.

Carbide Jobbers' Length

Brad Point—The sharp center point starts the hole and keeps the bit centered as you drill. Two cutting edges make clean holes, often for installing dowel pins and other hardware.

					Shank
	Drill Bit Size	Decimal Size Equiv.	Overall Lg.	Max. Drilling Dp.	Type	Size	Point Angle	Drill Bit Point Type	Bit Style	No. of Flutes		Each
Uncoated





				Letter Size
				V	0.377"	4 1/4"	2.2"	Round	0.377"	140°	Brad	Fluted	2	00000000	000000