McMaster-Carr logo
    Filter by
    System of Measurement
    Overall Length
    Maximum Drilling Depth
    Attribute Image
    Drill Bit Size
    Attribute Image
    Shank Type
    For Use On
    Drill Bit Point Type
    For Drilling Type
    Bit Style
    Flute Type
    Sold As
    Flute Direction
    Material
    For Drill Bit Shank Type
    USMCA Qualifying
    Number of Flutes
    Specifications Met
    Decimal Size Equivalent
    Point Angle
    Attribute Image
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    2 Products

    Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    Standard Point—The most common point type handles most jobs. However, for more aggressive cutting that generates a lot of heat, consider a multipoint or serrated bit.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    No. of
    Flutes
    Flute
    Type
    Each
    Uncoated Carbide-Tipped Steel
     
    Standard Point
    1"1"30"28"ANSI B212.152Spiral00000000000000
     

    Extensions for SDS-plus-Shank Drill Bits

    Image of Product. Front orientation. Drill Bit Extensions. Extensions for SDS-plus-Shank Drill Bits.
    Image of Specification. SDS-Plus Shank. Front orientation. Extensions for SDS-plus-Shank Drill Bits.

    SDS-Plus

    Shank

    SDS-Plus shanks have two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers. These extensions have a quick-change mechanism for fast bit changes. Attach to the shank of a drill bit to extend its reach.
    Overall
    Lg.
    OD
    Material
    Each
    One-Piece Extensions
    30"1 3/8"Steel00000000000000
     
    back to top