Compare material, finish, length class, and decimal size equivalents.
About Reamers
More
Drill Bits for Carbon Fiber, Fiberglass, and Graphite



These jobbers'-length bits have the rigidity and length required for most applications. They are designed to make clean holes in abrasive material. Their point keeps the bit centered without a pilot hole.
Uncoated drill bits have three drill points that make clean holes in fiber-reinforced composites without fraying or delaminating the material.
Diamond-coated drill bits are highly wear resistant for drilling in abrasive material. They last longer than uncoated bits.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
---|---|---|---|---|---|---|---|---|
Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Uncoated Carbide | ||||||||
3/64" | 0.0469" | 1 1/2" | 0.6" | Round | 3/64" | Brad | 000000 | 000000 |
1/16" | 0.0625" | 1 1/2" | 0.6" | Round | 1/16" | Brad | 000000 | 00000 |
5/64" | 0.0781" | 1 3/4" | 0.7" | Round | 5/64" | Brad | 0000000 | 00000 |
3/32" | 0.0938" | 2" | 0.8" | Round | 3/32" | Brad | 0000000 | 00000 |
7/64" | 0.1094" | 2 1/4" | 1" | Round | 7/64" | Brad | 0000000 | 00000 |
1/8" | 0.125" | 2 1/4" | 1" | Round | 1/8" | Brad | 0000000 | 00000 |
9/64" | 0.1406" | 2 1/2" | 1.1" | Round | 9/64" | Brad | 0000000 | 00000 |
5/32" | 0.1563" | 2 1/2" | 1.1" | Round | 5/32" | Brad | 0000000 | 00000 |
11/64" | 0.1719" | 2 3/4" | 1.3" | Round | 11/64" | Brad | 0000000 | 00000 |
3/16" | 0.1875" | 2 3/4" | 1.3" | Round | 3/16" | Brad | 0000000 | 00000 |
13/64" | 0.2031" | 3" | 1.4" | Round | 13/64" | Brad | 0000000 | 00000 |
7/32" | 0.2188" | 3" | 1.4" | Round | 7/32" | Brad | 0000000 | 00000 |
15/64" | 0.2344" | 3 1/4" | 1.6" | Round | 15/64" | Brad | 0000000 | 00000 |
1/4" | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Brad | 0000000 | 00000 |
17/64" | 0.2656" | 3 1/2" | 1.7" | Round | 17/64" | Brad | 0000000 | 00000 |
9/32" | 0.2813" | 3 1/2" | 1.7" | Round | 9/32" | Brad | 0000000 | 00000 |
19/64" | 0.2969" | 3 3/4" | 1.9" | Round | 19/64" | Brad | 0000000 | 00000 |
5/16" | 0.3125" | 3 3/4" | 1.9" | Round | 5/16" | Brad | 0000000 | 00000 |
21/64" | 0.3281" | 4" | 2" | Round | 21/64" | Brad | 0000000 | 00000 |
11/32" | 0.3438" | 4" | 2" | Round | 11/32" | Brad | 0000000 | 00000 |
23/64" | 0.3594" | 4 1/4" | 2.2" | Round | 23/64" | Brad | 0000000 | 00000 |
3/8" | 0.375" | 4 1/4" | 2.2" | Round | 3/8" | Brad | 0000000 | 00000 |
25/64" | 0.3906" | 4 1/2" | 2.3" | Round | 25/64" | Brad | 0000000 | 000000 |
13/32" | 0.4063" | 4 1/2" | 2.3" | Round | 13/32" | Brad | 0000000 | 000000 |
27/64" | 0.4219" | 4 1/2" | 2.3" | Round | 27/64" | Brad | 0000000 | 000000 |
7/16" | 0.4375" | 4 1/2" | 2.3" | Round | 7/16" | Brad | 0000000 | 000000 |
29/64" | 0.4531" | 4 3/4" | 2.4" | Round | 29/64" | Brad | 0000000 | 000000 |
15/32" | 0.4688" | 4 3/4" | 2.4" | Round | 15/32" | Brad | 0000000 | 000000 |
31/64" | 0.4844" | 4 3/4" | 2.4" | Round | 31/64" | Brad | 0000000 | 000000 |
1/2" | 0.5" | 4 3/4" | 2.4" | Round | 1/2" | Brad | 0000000 | 000000 |
9/16" | 0.5625" | 6" | 3.2" | Round | 9/16" | Brad | 0000000 | 000000 |
5/8" | 0.625" | 6" | 3.2" | Round | 5/8" | Brad | 0000000 | 000000 |
Diamond-Coated Carbide | ||||||||
1/16" | 0.0625" | 1 1/2" | 0.6" | Round | 1/16" | Split | 0000000 | 00000 |
5/64" | 0.0781" | 1 3/4" | 0.7" | Round | 5/64" | Split | 0000000 | 00000 |
3/32" | 0.0938" | 2" | 0.8" | Round | 3/32" | Split | 0000000 | 00000 |
7/64" | 0.1094" | 2 1/4" | 1" | Round | 7/64" | Split | 0000000 | 00000 |
1/8" | 0.125" | 2 1/4" | 1" | Round | 1/8" | Split | 0000000 | 00000 |
9/64" | 0.1406" | 2 1/2" | 1.1" | Round | 9/64" | Split | 0000000 | 00000 |
5/32" | 0.1563" | 2 1/2" | 1.1" | Round | 5/32" | Split | 0000000 | 00000 |
11/64" | 0.1719" | 2 3/4" | 1.3" | Round | 11/64" | Split | 0000000 | 00000 |
3/16" | 0.1875" | 2 3/4" | 1.3" | Round | 3/16" | Split | 0000000 | 00000 |
7/32" | 0.2188" | 3" | 1.4" | Round | 7/32" | Split | 0000000 | 00000 |
1/4" | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Split | 0000000 | 00000 |
5/16" | 0.3125" | 3 3/4" | 1.9" | Round | 5/16" | Split | 0000000 | 00000 |
3/8" | 0.375" | 4 1/4" | 2.2" | Round | 3/8" | Split | 0000000 | 000000 |
1/2" | 0.5" | 4 3/4" | 2.4" | Round | 1/2" | Split | 0000000 | 000000 |
Wire Gauge | ||||||||
Uncoated Carbide | ||||||||
60 ga. | 0.04" | 1 1/2" | 0.6" | Round | 0.04" | Brad | 00000000 | 00000 |
57 ga. | 0.043" | 1 1/2" | 0.6" | Round | 0.043" | Brad | 00000000 | 00000 |
56 ga. | 0.0465" | 1 1/2" | 0.6" | Round | 0.0465" | Brad | 00000000 | 00000 |
55 ga. | 0.052" | 1 1/2" | 0.6" | Round | 0.052" | Brad | 00000000 | 00000 |
54 ga. | 0.055" | 1 1/2" | 0.6" | Round | 0.055" | Brad | 00000000 | 00000 |
53 ga. | 0.0595" | 1 1/2" | 0.6" | Round | 0.0595" | Brad | 00000000 | 00000 |
52 ga. | 0.0635" | 1 1/2" | 0.6" | Round | 0.0635" | Brad | 00000000 | 00000 |
51 ga. | 0.067" | 1 1/2" | 0.6" | Round | 0.067" | Brad | 00000000 | 00000 |
50 ga. | 0.07" | 1 3/4" | 0.7" | Round | 0.07" | Brad | 00000000 | 00000 |
49 ga. | 0.073" | 1 3/4" | 0.7" | Round | 0.073" | Brad | 0000000 | 00000 |
48 ga. | 0.076" | 1 3/4" | 0.7" | Round | 0.076" | Brad | 00000000 | 00000 |
47 ga. | 0.0785" | 1 3/4" | 0.7" | Round | 0.0785" | Brad | 00000000 | 00000 |
46 ga. | 0.081" | 1 3/4" | 0.7" | Round | 0.081" | Brad | 00000000 | 00000 |
45 ga. | 0.082" | 1 3/4" | 0.7" | Round | 0.082" | Brad | 00000000 | 00000 |
44 ga. | 0.086" | 2" | 0.8" | Round | 0.086" | Brad | 00000000 | 00000 |
43 ga. | 0.089" | 2" | 0.8" | Round | 0.089" | Brad | 00000000 | 00000 |
42 ga. | 0.0935" | 2" | 0.8" | Round | 0.0935" | Brad | 00000000 | 00000 |
41 ga. | 0.096" | 2" | 0.8" | Round | 0.096" | Brad | 00000000 | 00000 |
40 ga. | 0.098" | 2" | 0.8" | Round | 0.098" | Brad | 00000000 | 00000 |
39 ga. | 0.0995" | 2 1/4" | 1" | Round | 0.0995" | Brad | 0000000 | 00000 |
38 ga. | 0.1015" | 2 1/4" | 1" | Round | 0.1015" | Brad | 00000000 | 00000 |
37 ga. | 0.104" | 2 1/4" | 1" | Round | 0.104" | Brad | 00000000 | 00000 |
36 ga. | 0.1065" | 2 1/4" | 1" | Round | 0.1065" | Brad | 00000000 | 00000 |
35 ga. | 0.11" | 2 1/4" | 1" | Round | 0.11" | Brad | 00000000 | 00000 |
34 ga. | 0.111" | 2 1/4" | 1" | Round | 0.111" | Brad | 00000000 | 00000 |
33 ga. | 0.113" | 2 1/4" | 1" | Round | 0.113" | Brad | 00000000 | 00000 |
32 ga. | 0.116" | 2 1/4" | 1" | Round | 0.116" | Brad | 00000000 | 00000 |
31 ga. | 0.12" | 2 1/4" | 1" | Round | 0.12" | Brad | 00000000 | 00000 |
30 ga. | 0.1285" | 2 1/4" | 1.1" | Round | 0.1285" | Brad | 00000000 | 00000 |
29 ga. | 0.136" | 2 1/2" | 1.1" | Round | 0.136" | Brad | 0000000 | 00000 |
28 ga. | 0.1405" | 2 1/2" | 1.1" | Round | 0.1405" | Brad | 00000000 | 00000 |
27 ga. | 0.144" | 2 1/2" | 1.1" | Round | 0.144" | Brad | 00000000 | 00000 |
26 ga. | 0.147" | 2 1/2" | 1.1" | Round | 0.147" | Brad | 00000000 | 00000 |
25 ga. | 0.1495" | 2 1/2" | 1.1" | Round | 0.1495" | Brad | 00000000 | 00000 |
24 ga. | 0.152" | 2 1/2" | 1.1" | Round | 0.152" | Brad | 00000000 | 00000 |
23 ga. | 0.154" | 2 1/2" | 1.1" | Round | 0.154" | Brad | 00000000 | 00000 |
22 ga. | 0.157" | 2 1/2" | 1.1" | Round | 0.157" | Brad | 00000000 | 00000 |
21 ga. | 0.159" | 2 1/2" | 1.1" | Round | 0.159" | Brad | 00000000 | 00000 |
20 ga. | 0.161" | 2 1/2" | 1.1" | Round | 0.161" | Brad | 00000000 | 00000 |
19 ga. | 0.166" | 2 3/4" | 1.3" | Round | 0.166" | Brad | 0000000 | 00000 |
18 ga. | 0.1695" | 2 3/4" | 1.3" | Round | 0.1695" | Brad | 00000000 | 00000 |
17 ga. | 0.173" | 2 3/4" | 1.3" | Round | 0.173" | Brad | 00000000 | 00000 |
16 ga. | 0.177" | 2 3/4" | 1.3" | Round | 0.177" | Brad | 00000000 | 00000 |
15 ga. | 0.18" | 2 3/4" | 1.3" | Round | 0.18" | Brad | 00000000 | 00000 |
14 ga. | 0.182" | 2 3/4" | 1.3" | Round | 0.182" | Brad | 00000000 | 00000 |
13 ga. | 0.185" | 2 3/4" | 1.3" | Round | 0.185" | Brad | 00000000 | 00000 |
12 ga. | 0.189" | 2 3/4" | 1.3" | Round | 0.189" | Brad | 00000000 | 00000 |
11 ga. | 0.191" | 2 3/4" | 1.3" | Round | 0.191" | Brad | 00000000 | 00000 |
10 ga. | 0.1935" | 2 3/4" | 1.3" | Round | 0.1935" | Brad | 00000000 | 00000 |
9 ga. | 0.196" | 3" | 1.4" | Round | 0.196" | Brad | 0000000 | 00000 |
8 ga. | 0.199" | 3" | 1.4" | Round | 0.199" | Brad | 00000000 | 00000 |
7 ga. | 0.201" | 3" | 1.4" | Round | 0.201" | Brad | 00000000 | 00000 |
6 ga. | 0.204" | 3" | 1.4" | Round | 0.204" | Brad | 00000000 | 00000 |
5 ga. | 0.2055" | 3" | 1.4" | Round | 0.2055" | Brad | 00000000 | 00000 |
4 ga. | 0.209" | 3" | 1.4" | Round | 0.209" | Brad | 00000000 | 00000 |
3 ga. | 0.213" | 3" | 1.4" | Round | 0.213" | Brad | 00000000 | 00000 |
2 ga. | 0.221" | 3" | 1.4" | Round | 0.221" | Brad | 00000000 | 00000 |
1 ga. | 0.228" | 3 1/4" | 1.4" | Round | 0.228" | Brad | 00000000 | 00000 |
Letter | ||||||||
Uncoated Carbide | ||||||||
A | 0.234" | 3 1/4" | 1.6" | Round | 0.234" | Brad | 00000000 | 00000 |
B | 0.238" | 3 1/4" | 1.6" | Round | 0.238" | Brad | 00000000 | 00000 |
C | 0.242" | 3 1/4" | 1.6" | Round | 0.242" | Brad | 00000000 | 00000 |
D | 0.246" | 3 1/4" | 1.6" | Round | 0.246" | Brad | 00000000 | 00000 |
E | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Brad | 00000000 | 00000 |
F | 0.257" | 3 1/2" | 1.6" | Round | 0.257" | Brad | 00000000 | 00000 |
G | 0.261" | 3 1/2" | 1.7" | Round | 0.261" | Brad | 00000000 | 00000 |
H | 0.266" | 3 1/2" | 1.7" | Round | 0.266" | Brad | 00000000 | 00000 |
I | 0.272" | 3 1/2" | 1.7" | Round | 0.272" | Brad | 00000000 | 00000 |
K | 0.281" | 3 1/2" | 1.7" | Round | 0.281" | Brad | 00000000 | 00000 |
L | 0.29" | 3 1/2" | 1.7" | Round | 0.29" | Brad | 00000000 | 00000 |
M | 0.295" | 3 3/4" | 1.9" | Round | 0.295" | Brad | 00000000 | 00000 |
N | 0.302" | 3 3/4" | 1.9" | Round | 0.302" | Brad | 00000000 | 00000 |
O | 0.316" | 3 3/4" | 1.9" | Round | 0.316" | Brad | 00000000 | 00000 |
P | 0.323" | 4" | 1.9" | Round | 0.323" | Brad | 00000000 | 00000 |
Q | 0.332" | 4" | 2" | Round | 0.332" | Brad | 00000000 | 00000 |
R | 0.339" | 4" | 2" | Round | 0.339" | Brad | 00000000 | 00000 |
S | 0.348" | 4" | 2" | Round | 0.348" | Brad | 00000000 | 00000 |
U | 0.368" | 4 1/4" | 2.2" | Round | 0.368" | Brad | 00000000 | 00000 |
V | 0.377" | 4 1/4" | 2.2" | Round | 0.377" | Brad | 00000000 | 00000 |
W | 0.386" | 4 1/2" | 2.3" | Round | 0.386" | Brad | 00000000 | 00000 |
X | 0.397" | 4 1/2" | 2.3" | Round | 0.397" | Brad | 00000000 | 000000 |
Y | 0.404" | 4 1/2" | 2.3" | Round | 0.404" | Brad | 00000000 | 000000 |
Metric | ||||||||
Uncoated Carbide | ||||||||
2.5 mm | 0.0984" | 50mm | 25mm | Round | 2.5mm | Brad | 00000000 | 00000 |
3.0 mm | 0.1181" | 57mm | 32mm | Round | 3mm | Brad | 00000000 | 00000 |
3.5 mm | 0.1378" | 63mm | 35mm | Round | 3.5mm | Brad | 00000000 | 00000 |
4.0 mm | 0.1575" | 63mm | 35mm | Round | 4mm | Brad | 00000000 | 00000 |
4.5 mm | 0.1772" | 70mm | 41mm | Round | 4.5mm | Brad | 00000000 | 00000 |
5.0 mm | 0.1968" | 76mm | 44mm | Round | 5mm | Brad | 00000000 | 00000 |
5.5 mm | 0.2165" | 76mm | 44mm | Round | 5.5mm | Brad | 00000000 | 00000 |
6.0 mm | 0.2362" | 82mm | 50mm | Round | 6mm | Brad | 00000000 | 00000 |
7.5 mm | 0.2953" | 95mm | 60mm | Round | 7.5mm | Brad | 00000000 | 00000 |
8.0 mm | 0.315" | 95mm | 60mm | Round | 8mm | Brad | 00000000 | 00000 |
8.5 mm | 0.3346" | 101mm | 63mm | Round | 8.5mm | Brad | 00000000 | 00000 |
9.5 mm | 0.374" | 108mm | 70mm | Round | 9.5mm | Brad | 00000000 | 00000 |
10.0 mm | 0.3937" | 114mm | 73mm | Round | 10mm | Brad | 00000000 | 000000 |
10.5 mm | 0.4134" | 114mm | 73mm | Round | 10.5mm | Brad | 00000000 | 000000 |
11.0 mm | 0.4331" | 114mm | 73mm | Round | 11mm | Brad | 00000000 | 000000 |
Diamond-Coated Carbide | ||||||||
1.0 mm | 0.0394" | 38mm | 13mm | Round | 1mm | Brad | 0000000 | 00000 |
1.5 mm | 0.0591" | 38mm | 19mm | Round | 1.5mm | Brad | 0000000 | 00000 |
2.0 mm | 0.0787" | 44mm | 22mm | Round | 2mm | Brad | 0000000 | 00000 |
2.5 mm | 0.0984" | 50mm | 25mm | Round | 2.5mm | Brad | 0000000 | 00000 |
3.0 mm | 0.1181" | 57mm | 32mm | Round | 3mm | Brad | 0000000 | 00000 |
3.5 mm | 0.1378" | 63mm | 35mm | Round | 3.5mm | Brad | 0000000 | 00000 |
4.0 mm | 0.1575" | 63mm | 35mm | Round | 4mm | Brad | 0000000 | 00000 |
4.5 mm | 0.1772" | 70mm | 41mm | Round | 4.5mm | Brad | 0000000 | 00000 |
5.0 mm | 0.1968" | 76mm | 44mm | Round | 5mm | Brad | 0000000 | 00000 |
5.5 mm | 0.2165" | 76mm | 44mm | Round | 5.5mm | Brad | 0000000 | 00000 |
6.0 mm | 0.2362" | 82mm | 50mm | Round | 6mm | Brad | 0000000 | 00000 |
6.5 mm | 0.2559" | 82mm | 50mm | Round | 6.5mm | Brad | 0000000 | 00000 |
7.0 mm | 0.2756" | 89mm | 54mm | Round | 7mm | Brad | 0000000 | 00000 |
8.0 mm | 0.315" | 95mm | 60mm | Round | 8mm | Brad | 0000000 | 00000 |
9.0 mm | 0.3543" | 108mm | 70mm | Round | 9mm | Brad | 0000000 | 000000 |
10.0 mm | 0.3937" | 114mm | 73mm | Round | 10mm | Brad | 0000000 | 000000 |
11.5 mm | 0.4528" | 120mm | 76mm | Round | 11.5mm | Brad | 0000000 | 000000 |
12.0 mm | 0.4724" | 120mm | 76mm | Round | 12mm | Brad | 0000000 | 000000 |
12.5 mm | 0.4921" | 120mm | 76mm | Round | 12.5mm | Brad | 0000000 | 000000 |
Short-Length Drill Bits for Carbon Fiber, Fiberglass, and Graphite

Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers’-length drill bits. A diamond coating gives them the sharpness and wear resistance for drilling clean holes in abrasive material. The split point keeps the bit centered without a pilot hole.
For technical drawings and 3-D models, click on a part number.
Shank | ||||||||
---|---|---|---|---|---|---|---|---|
Drill Bit Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Diamond-Coated Carbide | ||||||||
1/8" | 0.125" | 2" | 0.5" | Round | 1/8" | Split | 0000000 | 000000 |
9/64" | 0.1406" | 2" | 0.5" | Round | 9/64" | Split | 0000000 | 00000 |
11/64" | 0.1719" | 2 1/2" | 0.6" | Round | 11/64" | Split | 0000000 | 00000 |
3/16" | 0.1875" | 2 1/2" | 0.6" | Round | 3/16" | Split | 0000000 | 00000 |
7/32" | 0.2188" | 2 1/2" | 0.8" | Round | 7/32" | Split | 0000000 | 00000 |
1/4" | 0.25" | 2 1/2" | 0.8" | Round | 1/4" | Split | 0000000 | 00000 |
5/16" | 0.3125" | 2 3/4" | 1" | Round | 5/16" | Split | 0000000 | 00000 |
3/8" | 0.375" | 3" | 1" | Round | 3/8" | Split | 0000000 | 000000 |
1/2" | 0.5" | 3" | 1" | Round | 1/2" | Split | 0000000 | 000000 |
Round-Shank Drill Reamers

Drill and finish holes in a single pass with these dual-purpose tools. The tapered tip gradually pierces your material to reduce friction, and the straight flutes make clean cuts without chipping or peeling the edge of the hole. Made from solid carbide, these drill reamers are strong and heat resistant. The flutes stay sharp even when cutting abrasive materials such as carbon fiber, fiberglass, and graphite. Use them in drill presses or other machines—carbide is brittle, and will break if used to drill by hand.
For technical drawings and 3-D models, click on a part number.
Dia. | Lg. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Reamer Size | Reamer | Shank | Max. Drilling Dp. | Flute | Overall | Number of Flutes | Flute Style | Cutting Dia. Tolerance | For Use On | Each | |
Carbide | |||||||||||
Inch | |||||||||||
1/8" | 0.1250" | 1/8" | 0.75" | 3/4" | 3" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
3/16" | 0.1875" | 0.187" | 1.06" | 1 1/16" | 3" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 00000 |
13/64" | 0.2031" | 0.203" | 2" | 2" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
7/32" | 0.2188" | 0.219" | 2.13" | 2 1/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
1/4" | 0.2500" | 1/4" | 2.13" | 2 1/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
9/32" | 0.2812" | 0.281" | 2.75" | 2 3/4" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
19/64" | 0.2969" | 0.297" | 2.94" | 2 15/16" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
5/16" | 0.3125" | 0.312" | 1.81" | 1 13/16" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
21/64" | 0.3280" | 0.328" | 1.88" | 1 7/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
11/32" | 0.3438" | 0.344" | 2" | 2" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
3/8" | 0.3750" | 3/8" | 2.19" | 2 3/16" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
25/64" | 0.3900" | 0.39" | 3.06" | 3 1/16" | 6" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
7/16" | 0.4375" | 0.437" | 3.44" | 3 7/16" | 6" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
1/2" | 0.5000" | 1/2" | 3.94" | 3 15/16" | 6" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
Wire Gauge | |||||||||||
40 ga | 0.0980" | 0.098" | 0.56" | 9/16" | 3" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 00000 |
30 ga | 0.1285" | 0.128" | 0.75" | 3/4" | 3" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 00000 |
20 ga | 0.1610" | 0.161" | 0.94" | 15/16" | 3" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 00000 |
11 ga | 0.1910" | 0.191" | 1.88" | 1 7/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
10 ga | 0.1935" | 0.193" | 1.88" | 1 7/8" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
7 ga | 0.2010" | 0.201" | 2" | 2" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
2 ga | 0.2210" | 0.221" | 2.19" | 2 3/16" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
1 ga | 0.2280" | 0.228" | 2.25" | 2 1/4" | 4" | 4 | Straight | 0" to 0.0005" | Carbon Fiber, Fiberglass, Graphite | 0000000 | 000000 |
Router Bits for Composites


The sharp cutting edges and flute shapes of these tools are specifically designed to cut through tough composite materials, such as carbon fiber and fiberglass, with minimal resistance. This means less strain on your router and more control when cutting, leading to smooth cuts. They're made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.
Trapezoid-Pattern Flutes—Like diamond-pattern flutes, but with overlapping cutting edges for an even smoother cut.
Bits with a drill/mill cut style have a pointed end for easier plunge cuts than bits with a square cut style.
Plunge-cutting bits let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work, such as trimming, contouring, and finishing.
For technical drawings and 3-D models, click on a part number.
Cutting Dia. | Lg. of Cut | Shank Dia. | Overall Lg. | For Tool Type | For Use On | Each | |
Uncoated Carbide | |||||||
---|---|---|---|---|---|---|---|
Trapezoid-Pattern Flutes with a Drill/Mill Cut Style—Plunge Cutting | |||||||
3/16" | 1" | 1/4" | 3" | CNC Machine, Hand Router, Router Table | Carbon Fiber, Fiberglass | 0000000 | 000000 |
1/4" | 1" | 1/4" | 3" | CNC Machine, Hand Router, Router Table | Carbon Fiber, Fiberglass | 0000000 | 00000 |
3/8" | 1" | 3/8" | 3" | CNC Machine, Hand Router, Router Table | Carbon Fiber, Fiberglass | 0000000 | 00000 |
1/2" | 1" | 1/2" | 3" | CNC Machine, Hand Router, Router Table | Carbon Fiber, Fiberglass | 0000000 | 00000 |
Diamond-Coated Router Bits for Composites


With a diamond coating, these bits resist wear when used on abrasive materials, making them last about 50 times longer than uncoated bits. Their sharp cutting edges and flute shapes are specifically designed to cut through tough materials such as composites with minimal resistance. This means less strain on your router and more control when cutting, leading to a smooth cut. Bits are made of solid carbide for longer tool life and faster cutting speeds than high-speed steel.
Diamond-Pattern Flutes—Small, staggered teeth aggressively cut, yet leave a smooth finish.
Bits with a drill/mill cut style have a pointed end for easier plunge cuts than square-cut bits.
Plunge-cutting bits let you cut directly into the workpiece from above. Other bits are best for operations where the peripheral teeth do most of the work such as trimming, contouring, and finishing.
For technical drawings and 3-D models, click on a part number.
Cutting Dia. | Lg. of Cut | Shank Dia. | Overall Lg. | Number of Flutes | Cut Type | For Tool Type | For Use On | Each | |
Diamond-Coated Carbide | |||||||||
---|---|---|---|---|---|---|---|---|---|
Diamond-Pattern Flutes with a Drill/Mill Cut Style | |||||||||
1/4" | 1" | 1/4" | 3" | 8 | Plunge | CNC Machine, Router Table | Carbon Fiber | 0000000 | 0000000 |
1/4" | 1" | 1/4" | 3" | 12 | Plunge | CNC Machine, Router Table | Carbon Fiber | 00000000 | 000000 |
3/8" | 1 1/4" | 3/8" | 3" | 12 | Plunge | CNC Machine, Router Table | Carbon Fiber | 00000000 | 000000 |
1/2" | 1" | 1/2" | 3" | 14 | Plunge | CNC Machine, Router Table | Carbon Fiber | 00000000 | 000000 |