We will reply to your message within an hour.
Polish small areas and hard-to-reach spots. Use in a drill or grinder for bits and burs.
Remove scratches from your workpiece with these hard bobs.
These bobs have a long-lasting diamond abrasive.
The silicon carbide abrasive cuts quickly with light pressure.
A uniform density helps distribute abrasive grains evenly throughout these felt wheels for a more consistent surface polish.
The edge of the wheel is tapered for polishing joints, grooves, and crevices.
Loose layers of cloth conform to curves and contours.
Specially shaped to buff the insides of metal pipes, cylinders, stampings, and tapered objects.
Loose layers of cloth conform to curves and contours. Also known as jewelers’ buffs.
Use these rigid wheels to remove gouges and scratches from metal workpieces.
Made of loose layers of cotton.
Shaped for use on inside cylinders or on irregular surfaces.
The bits in these sets have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
The abrasive grains in these discs are blended with rubber, which cushions during grinding to produce a smoother surface texture than other discs with similar grits. Discs attach to your grinder with a shank.
Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.
A diamond abrasive that's bonded to a rubber cushioning makes these bits last 10 to 20 times longer than rubber-cushioned bits without diamond. Because they’re cushioned during grinding, these bits produce a smoother surface texture than other bits with similar grits.
Produce a smooth surface on precise, intricate grinding jobs.
Bits are specially formulated to stay cool during grinding, so they won’t mar or discolor stainless steel.
Made of aluminum oxide, these bits are well suited for use on most metals and materials that are not heat sensitive.
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas.
Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.
Use bits in any drill chuck that accepts a 1/4" hex shank.
Made of cotton fiber layers embedded with aluminum-oxide grains, these bits grind and finish in one step.
Each set contains a selection of our most popular grinding bits.
Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.
The small 3/32" diameter shank and small head makes these bits good for precise and intricate jobs.
Made of ceramic alumina, these bits prevent material and heat buildup better than bits made of boron nitride and aluminum oxide when used on steel, stainless steel, iron, and titanium.
Grind a variety of materials, from metal to ceramic and plastic, in precise, detailed jobs.
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes.
The diamond abrasive in these bits is extremely hard and can grind metal, ceramic, and plastic.
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits.
Made with diamond abrasive, these bits are extremely hard and last longer than tungsten carbide. They have a small shank and head for precise and intricate jobs.
The diamond abrasive in these bits is extremely hard and lasts longer than tungsten carbide. For longer tool life and improved finish, use a water- or oil-soluble mist or coolant.
Complete a wide range of cutting, grinding, and sanding tasks by pairing these accessories with your rotary tool.
Sharpen, deburr, and grind metal surfaces.
Polish, deburr, and remove rust from metal surfaces such as tools, machine parts, and electrical contacts.
Buff, polish, and clean with in these kits.
Swap out accessories on your Dremel without tools.
For fast accessory changes without any other tools, twist these wrenches to loosen and tighten the collet on your Dremel grinder.
The quick-change arbors in these kits allow you to easily swap accessories.
Shape and smooth wood, fiberglass, and rubber surfaces or remove rust from metal.
For engraving and carving, these kits contain a variety of Dremel-compatible bits and stones.
Keep a variety of bits on hand for routing, inlaying, and mortising in wood and other soft materials.
The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
Choose a bit with the same angle as your countersink to debur the inside of the hole.
Slip a cap onto the head of a shank and sand small, recessed, and hard-to-reach areas.
Keep a convenient mix of spiral-wound sanding rolls on hand. As the outer layer wears away, new abrasive is exposed.
As the outer layer wears away, new abrasive is exposed.
The premium abrasive stays sharp longer.
Assortments include a variety of sanding drums and sleeves to shape, deburr, and sand edges and internal surfaces.
Various sizes and grits of flap sanding wheels are included in these assortments. Secure the shank into the collet or chuck of your tool.
Secure the shank into the collet or chuck of your tool.
The flaps are slit into narrow strips to provide more flexibility than other flap wheels.
An additive in the abrasive resists heat.
The abrasive‐embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.
A coating prevents dust and debris from building up on the abrasive surface.
Assortments include a selection of flap wheels to polish, clean, and deburr deep inside tubes and cylinders.
With alternating cloth and nylon mesh abrasive flaps, these wheels are more flexible and produce finer finishes than all-cloth flap sanding wheels.
Polish, clean, and debur deep inside tubes and cylinders.
The shank on these spindles installs directly into grinder collets and drill chucks.
Use one of these spindles to mount buffing wheels to the tapered shaft on your grinder or buffer.
Mount to the straight shaft on your grinder or buffer.
This drum is required to use a sanding sleeve with a Dremel grinder.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs.
The abrasive lasts longer than that of standard brushes.
Remove light-to-medium rust and stains and small burs with these flexible-bristle brushes.
Use on delicate surfaces.
The small brush face can access hard-to-reach spots to remove light-to-medium rust and stains and small burs.
Clean delicate surfaces in hard-to-reach spots. Use these brushes to remove light-to-medium rust and stains and small burs.
Use for tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. The small brush face can access hard-to-reach spots.
Removable bands around the bristles keep them from flaring and breaking. Adjust the bands to change bristle length.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they last longer than standard brushes.
Abrasive grains are embedded in the entire length of the bristles so the sides act like flexible files. These brushes remove workpiece material as well as surface contamination in a single step.
These brushes conform to corners, curves, and irregular surfaces to remove light-to-medium rust and stains and small burs.
The bristles are coated with a synthetic compound that keeps them stiff and straight so they’re more aggressive and last longer than standard brushes.
A special fastener on the back of these brushes allows you to easily swap one brush for another.
Remove light-to-medium rust and stains and small burs from tubes, pipes, and holes.
Attach the shank to a handle or power tool.
Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.
Use for tasks such as removing weld slag, heavy surface contamination, and large burs from tubes, pipes, and holes.
Clean delicate surfaces inside tubes, pipes, and holes.
Bend these brushes through curved holes and reach into corners.
Bristles at the top of these brushes clean the bottom of closed-end holes.
Rigid, partially twisted bristles handle tasks such as edge rounding and removing weld slag, heavy surface contamination, and large burs. Also known as knot-wire brushes.
Use on contours and angles or for reaching into cracks and corners.