About Ball and Roller Bearings
More
Needle-Roller Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/590/5905k137p2-d03c-digital@halfx_637051258562575503.png?ver=imagenotfound)
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
1/8" | 1/4" | 1/4" | Steel | 240 | 160 | 48,000 | Required | 8 | 0° to 240° | __ | 00000000 | 000000 |
5/32" | 9/32" | 1/4" | Steel | 280 | 210 | 44,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
3/16" | 11/32" | 1/4" | Steel | 400 | 305 | 40,000 | Required | 8 | 0° to 240° | DIN 281, ISO 76 | 00000000 | 00000 |
3/16" | 11/32" | 3/8" | Steel | 630 | 550 | 40,000 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
1/4" | 7/16" | 1/4" | Steel | 360 | 260 | 35,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1/4" | 7/16" | 5/16" | Steel | 570 | 470 | 35,000 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
1/4" | 7/16" | 7/16" | Steel | 920 | 870 | 35,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
5/16" | 1/2" | 7/16" | Steel | 1,050 | 1,050 | 29,000 | Required | 8 | -40° to 280° | __ | 00000000 | 0000 |
5/16" | 1/2" | 9/16" | Steel | 1,300 | 1,480 | 29,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
3/8" | 9/16" | 5/16" | Steel | 650 | 610 | 25,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
3/8" | 9/16" | 3/8" | Steel | 870 | 890 | 25,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
3/8" | 9/16" | 1/2" | Steel | 1,300 | 1,450 | 25,000 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
3/8" | 9/16" | 5/8" | Steel | 1,650 | 2,040 | 25,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
7/16" | 5/8" | 1/2" | Steel | 1,430 | 1,750 | 22,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
1/2" | 11/16" | 5/16" | Steel | 820 | 890 | 19,500 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 000000 | 0000 |
1/2" | 11/16" | 3/8" | Steel | 1,040 | 1,200 | 19,500 | Required | 8 | -40° to 280° | __ | 00000000 | 0000 |
1/2" | 11/16" | 1/2" | Steel | 1,550 | 2,000 | 19,500 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
1/2" | 11/16" | 5/8" | Steel | 1,950 | 2,760 | 19,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
1/2" | 11/16" | 3/4" | Steel | 2,200 | 3,210 | 19,500 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
9/16" | 3/4" | 1/2" | Steel | 1,700 | 2,420 | 17,600 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
9/16" | 3/4" | 5/8" | Steel | 2,100 | 3,150 | 17,600 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
5/8" | 13/16" | 7/16" | Steel | 1,450 | 2,100 | 16,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
5/8" | 13/16" | 1/2" | Steel | 1,800 | 2,700 | 16,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
5/8" | 13/16" | 5/8" | Steel | 2,300 | 3,650 | 16,000 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
5/8" | 13/16" | 3/4" | Steel | 2,700 | 4,330 | 16,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
11/16" | 7/8" | 1/2" | Steel | 1,900 | 2,950 | 15,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
11/16" | 7/8" | 3/4" | Steel | 2,950 | 5,150 | 14,600 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
3/4" | 1" | 3/8" | Steel | 1,600 | 1,860 | 13,100 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
3/4" | 1" | 1/2" | Steel | 2,200 | 2,800 | 13,100 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
3/4" | 1" | 5/8" | Steel | 2,850 | 3,950 | 13,100 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
3/4" | 1" | 3/4" | Steel | 3,450 | 4,970 | 13,100 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
7/8" | 1 1/8" | 3/8" | Steel | 1,850 | 2,400 | 11,400 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
7/8" | 1 1/8" | 1/2" | Steel | 2,500 | 3,550 | 11,400 | Required | 8 | -40° to 280° | __ | 00000000 | 0000 |
7/8" | 1 1/8" | 3/4" | Steel | 3,800 | 6,100 | 11,400 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
7/8" | 1 1/8" | 1" | Steel | 4,950 | 8,540 | 11,400 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1" | 1 1/4" | 1/2" | Steel | 2,800 | 4,300 | 10,100 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 0000 |
1" | 1 1/4" | 3/4" | Steel | 4,050 | 7,000 | 10,100 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
1" | 1 1/4" | 1" | Steel | 5,550 | 10,200 | 10,100 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 1/8" | 1 3/8" | 1/2" | Steel | 2,900 | 4,540 | 9,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 1/8" | 1 3/8" | 3/4" | Steel | 4,250 | 7,700 | 9,000 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
1 1/4" | 1 1/2" | 5/8" | Steel | 3,900 | 6,970 | 8,200 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 1/4" | 1 1/2" | 3/4" | Steel | 4,750 | 8,900 | 8,200 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
1 1/4" | 1 1/2" | 1" | Steel | 6,100 | 12,300 | 8,200 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 5/16" | 1 5/8" | 5/8" | Steel | 4,750 | 7,530 | 7,700 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 3/8" | 1 5/8" | 1/2" | Steel | 3,050 | 5,330 | 7,500 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 3/8" | 1 5/8" | 3/4" | Steel | 4,800 | 9,600 | 7,500 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
1 1/2" | 1 7/8" | 3/4" | Steel | 6,800 | 10,900 | 6,700 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
1 1/2" | 1 7/8" | 7/8" | Steel | 8,100 | 13,500 | 6,700 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 1/2" | 1 7/8" | 1" | Steel | 8,650 | 14,800 | 6,700 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 1/2" | 1 7/8" | 1 1/4" | Steel | 10,600 | 19,300 | 6,700 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 0000000 | 00000 |
1 5/8" | 2" | 5/8" | Steel | 5,700 | 8,900 | 6,200 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
1 5/8" | 2" | 1 1/4" | Steel | 11,400 | 21,800 | 6,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
1 3/4" | 2 1/8" | 1" | Steel | 9,300 | 17,000 | 5,800 | Required | 8 | -40° to 280° | __ | 00000000 | 00000 |
2" | 2 3/8" | 1/2" | Steel | 4,900 | 7,900 | 5,100 | Required | 8 | -40° to 280° | __ | 00000000 | 0000 |
3mm | 6.5mm | 6mm | Steel | 270 | 180 | 48,000 | Required | 8 | 0° to 240° | DIN 618, ISO 3245 | 00000000 | 0000 |
4mm | 8mm | 8mm | Steel | 400 | 290 | 42,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
5mm | 9mm | 9mm | Steel | 540 | 440 | 39,000 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
6mm | 10mm | 8mm | Steel | 450 | 370 | 36,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
6mm | 10mm | 9mm | Steel | 600 | 550 | 36,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
7mm | 11mm | 9mm | Steel | 700 | 660 | 33,000 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
8mm | 12mm | 8mm | Steel | 620 | 590 | 29,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 0000000 | 0000 |
9mm | 13mm | 8mm | Steel | 750 | 800 | 26,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
9mm | 13mm | 10mm | Steel | 960 | 1,050 | 26,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
9mm | 13mm | 12mm | Steel | 1,150 | 1,400 | 26,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
10mm | 14mm | 10mm | Steel | 990 | 1,150 | 24,300 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
10mm | 14mm | 12mm | Steel | 1,200 | 1,500 | 24,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
10mm | 14mm | 15mm | Steel | 1,500 | 1,950 | 24,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
12mm | 16mm | 10mm | Steel | 1,100 | 1,350 | 20,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 0000 |
12mm | 18mm | 12mm | Steel | 1,450 | 1,600 | 20,000 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 0000000 | 0000 |
13mm | 19mm | 12mm | Steel | 1,500 | 1,750 | 18,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
14mm | 20mm | 12mm | Steel | 1,600 | 1,900 | 17,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 0000000 | 0000 |
15mm | 21mm | 12mm | Steel | 1,750 | 2,100 | 16,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
15mm | 21mm | 16mm | Steel | 2,350 | 3,250 | 16,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
15mm | 21mm | 22mm | Steel | 3,000 | 4,350 | 16,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
16mm | 22mm | 12mm | Steel | 1,700 | 2,150 | 15,600 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 0000000 | 00000 |
16mm | 22mm | 16mm | Steel | 2,450 | 3,400 | 15,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
16mm | 22mm | 22mm | Steel | 2,900 | 4,350 | 15,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
17mm | 23mm | 12mm | Steel | 1,750 | 2,300 | 14,700 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
18mm | 24mm | 12mm | Steel | 1,800 | 2,450 | 14,000 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
18mm | 24mm | 16mm | Steel | 2,600 | 3,850 | 14,000 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
20mm | 26mm | 10mm | Steel | 1,400 | 1,800 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
20mm | 26mm | 12mm | Steel | 1,900 | 2,700 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
20mm | 26mm | 16mm | Steel | 2,850 | 4,500 | 12,700 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 0000000 | 0000 |
20mm | 26mm | 20mm | Steel | 3,500 | 5,800 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 00000 |
20mm | 26mm | 30mm | Steel | 4,900 | 8,950 | 12,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 10mm | Steel | 1,650 | 2,350 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
22mm | 28mm | 12mm | Steel | 2,000 | 3,000 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 16mm | Steel | 3,000 | 4,950 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 20mm | Steel | 3,700 | 6,500 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 12mm | Steel | 2,450 | 3,400 | 10,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 16mm | Steel | 3,500 | 5,350 | 10,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 20mm | Steel | 4,450 | 7,400 | 10,200 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 26mm | Steel | 5,700 | 10,100 | 10,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 38mm | Steel | 7,600 | 14,800 | 10,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
28mm | 35mm | 16mm | Steel | 3,650 | 5,950 | 9,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 00000 |
28mm | 35mm | 20mm | Steel | 4,650 | 8,050 | 9,200 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
30mm | 37mm | 12mm | Steel | 2,700 | 4,100 | 8,600 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
30mm | 37mm | 16mm | Steel | 3,850 | 6,500 | 8,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
30mm | 37mm | 20mm | Steel | 4,900 | 8,850 | 8,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
30mm | 37mm | 26mm | Steel | 6,250 | 12,100 | 8,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
30mm | 37mm | 38mm | Steel | 8,400 | 17,750 | 8,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
35mm | 42mm | 12mm | Steel | 2,900 | 4,750 | 7,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
35mm | 42mm | 20mm | Steel | 5,400 | 10,300 | 7,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
40mm | 47mm | 12mm | Steel | 3,150 | 5,500 | 6,600 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
40mm | 47mm | 16mm | Steel | 4,450 | 8,650 | 6,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
40mm | 47mm | 20mm | Steel | 5,700 | 11,650 | 6,600 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
45mm | 52mm | 12mm | Steel | 3,300 | 6,150 | 5,900 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 0000000 | 00000 |
45mm | 52mm | 16mm | Steel | 4,750 | 9,650 | 5,900 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
45mm | 52mm | 20mm | Steel | 6,050 | 13,250 | 5,900 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
50mm | 58mm | 25mm | Steel | 8,650 | 18,850 | 5,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
55mm | 63mm | 20mm | Steel | 7,050 | 15,050 | 4,850 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
60mm | 68mm | 12mm | Steel | 3,900 | 7,150 | 4,450 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
60mm | 68mm | 20mm | Steel | 7,500 | 16,850 | 4,450 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
60mm | 68mm | 32mm | Steel | 11,900 | 30,300 | 4,450 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
Sealed—One Side | ||||||||||||
3/8" | 9/16" | 3/8" | Steel | 650 | 610 | 15,000 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 00000000 | 00000 |
3/8" | 9/16" | 9/16" | Steel | 1,300 | 1,450 | 15,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1/2" | 11/16" | 9/16" | Steel | 1,550 | 2,000 | 11,700 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 0000 |
5/8" | 13/16" | 9/16" | Steel | 1,800 | 2,700 | 9,600 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 0000000 | 00000 |
5/8" | 13/16" | 11/16" | Steel | 2,300 | 3,650 | 9,600 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 0000 |
3/4" | 1" | 9/16" | Steel | 2,200 | 2,800 | 7,800 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
3/4" | 1" | 11/16" | Steel | 2,850 | 3,950 | 7,800 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
7/8" | 1 1/8" | 9/16" | Steel | 2,500 | 3,550 | 6,800 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1" | 1 1/4" | 7/8" | Steel | 4,050 | 6,400 | 6,100 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1 1/2" | 1 7/8" | 7/8" | Steel | 8,100 | 13,500 | 6,700 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1 1/2" | 1 7/8" | 1" | Steel | 8,100 | 13,500 | 4,000 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 00000000 | 00000 |
8mm | 12mm | 10mm | Steel | 620 | 590 | 17,700 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
12mm | 18mm | 14mm | Steel | 1,450 | 1,600 | 12,000 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 0000 |
14mm | 20mm | 14mm | Steel | 1,600 | 1,900 | 10,500 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
15mm | 21mm | 14mm | Steel | 1,750 | 2,200 | 9,900 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
15mm | 21mm | 18mm | Steel | 2,350 | 3,200 | 9,900 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
16mm | 22mm | 14mm | Steel | 1,700 | 2,150 | 9,300 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
20mm | 26mm | 18mm | Steel | 2,850 | 4,500 | 7,600 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
22mm | 28mm | 18mm | Steel | 3,000 | 4,950 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
25mm | 32mm | 18mm | Steel | 3,500 | 5,350 | 6,100 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
30mm | 37mm | 18mm | Steel | 3,850 | 6,500 | 5,200 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
Sealed—Both Sides | ||||||||||||
1/4" | 7/16" | 7/16" | Steel | 570 | 470 | 21,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
5/16" | 1/2" | 7/16" | Steel | 650 | 590 | 17,500 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 00000000 | 00000 |
3/8" | 9/16" | 7/16" | Steel | 650 | 610 | 15,000 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 00000000 | 00000 |
3/8" | 9/16" | 5/8" | Steel | 1,300 | 1,450 | 15,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1/2" | 11/16" | 7/16" | Steel | 780 | 820 | 15,000 | Lubricated | 8 | -25° to 225° | __ | 00000000 | 00000 |
1/2" | 11/16" | 5/8" | Steel | 1,550 | 2,000 | 11,700 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
5/8" | 13/16" | 5/8" | Steel | 1,800 | 2,700 | 9,600 | Lubricated | 8 | 0° to 210° | DIN 281, ISO 76 | 00000000 | 00000 |
5/8" | 13/16" | 3/4" | Steel | 2,300 | 3,650 | 9,600 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
3/4" | 1" | 5/8" | Steel | 2,200 | 2,800 | 7,800 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
3/4" | 1" | 3/4" | Steel | 2,850 | 3,950 | 7,800 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
1" | 1 1/4" | 1" | Steel | 4,050 | 6,800 | 6,100 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
8mm | 12mm | 12mm | Steel | 620 | 590 | 17,700 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
10mm | 14mm | 12mm | Steel | 700 | 750 | 14,600 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
10mm | 14mm | 14mm | Steel | 980 | 1,100 | 14,600 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 00000000 | 00000 |
12mm | 18mm | 16mm | Steel | 1,450 | 1,600 | 12,000 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
14mm | 20mm | 16mm | Steel | 1,600 | 1,900 | 10,500 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
15mm | 21mm | 16mm | Steel | 2,350 | 3,250 | 9,900 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 00000000 | 00000 |
16mm | 22mm | 16mm | Steel | 1,700 | 2,150 | 9,300 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
16mm | 22mm | 20mm | Steel | 2,450 | 3,400 | 9,300 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
18mm | 24mm | 16mm | Steel | 1,800 | 2,450 | 8,400 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
20mm | 26mm | 16mm | Steel | 1,900 | 2,700 | 7,600 | Lubricated | 8 | 0° to 210° | DIN 618 | 0000000 | 00000 |
20mm | 26mm | 20mm | Steel | 2,850 | 4,500 | 7,600 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 0000000 | 00000 |
22mm | 28mm | 16mm | Steel | 2,000 | 3,000 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
22mm | 28mm | 20mm | Steel | 3,000 | 4,950 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
25mm | 32mm | 16mm | Steel | 2,450 | 3,400 | 6,100 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
25mm | 32mm | 20mm | Steel | 4,450 | 7,400 | 6,100 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 00000000 | 00000 |
25mm | 32mm | 30mm | Steel | 5,700 | 10,100 | 6,100 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
30mm | 37mm | 16mm | Steel | 2,700 | 4,050 | 5,200 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
30mm | 37mm | 20mm | Steel | 3,850 | 6,500 | 5,200 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
35mm | 42mm | 20mm | Steel | 5,400 | 10,300 | 4,450 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 00000000 | 00000 |
40mm | 47mm | 16mm | Steel | 3,100 | 5,450 | 3,950 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
50mm | 58mm | 24mm | Steel | 6,950 | 14,150 | 3,150 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
One-Way Locking Needle-Roller Bearing Clutches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/248/2489k14p2-d03c-digital@halfx_637051195719981151.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/155/1553n25p2-d03c-digital@halfx_637051292777211015.png?ver=imagenotfound)
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches. An arrow on the lip indicates the rotational direction that locks the bearings.
Single-row bearings do not support loads from any direction. To support radial loads, use with our Needle-Roller Bearings.
Triple-row bearings support radial loads.
Bearings with 301 stainless steel springs handle higher temperatures than bearings with acetal springs.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Single Row | ||||||||||||
Acetal Plastic Springs | ||||||||||||
1/8" | 9/32" | 1/4" | Steel | __ | __ | 34,000 | 0.2 | Required | 16 | -20° to 200° | 0000000 | 000000 |
1/4" | 7/16" | 1/2" | Steel | __ | __ | 20,000 | 1.5 | Required | 16 | -20° to 200° | 0000000 | 00000 |
3/8" | 5/8" | 1/2" | Steel | __ | __ | 18,000 | 4 | Required | 16 | -20° to 200° | 0000000 | 00000 |
1/2" | 3/4" | 1/2" | Steel | __ | __ | 17,000 | 6.5 | Required | 16 | -20° to 200° | 0000000 | 00000 |
5/8" | 7/8" | 5/8" | Steel | __ | __ | 14,000 | 12 | Required | 16 | -20° to 200° | 000000 | 00000 |
3/4" | 1" | 5/8" | Steel | __ | __ | 12,000 | 17 | Required | 16 | -20° to 200° | 000000 | 00000 |
1" | 1 5/16" | 5/8" | Steel | __ | __ | 8,700 | 35 | Required | 16 | -20° to 200° | 000000 | 00000 |
301 Stainless Steel Springs | ||||||||||||
1/4" | 7/16" | 1/2" | Steel | __ | __ | 20,000 | 1.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
3/8" | 5/8" | 1/2" | Steel | __ | __ | 18,000 | 4 | Required | 16 | -20° to 250° | 0000000 | 00000 |
1/2" | 3/4" | 1/2" | Steel | __ | __ | 17,000 | 6.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
5/8" | 7/8" | 5/8" | Steel | __ | __ | 14,000 | 12 | Required | 16 | -20° to 250° | 0000000 | 00000 |
3/4" | 1" | 5/8" | Steel | __ | __ | 12,000 | 17 | Required | 16 | -20° to 250° | 0000000 | 00000 |
1" | 1 5/16" | 5/8" | Steel | __ | __ | 8,700 | 35 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Steel Springs | ||||||||||||
6mm | 10mm | 12mm | Steel | __ | __ | 23,000 | 1.3 | Required | 16 | 10° to 150° | 0000000 | 00000 |
8mm | 12mm | 12mm | Steel | __ | __ | 17,000 | 2.3 | Required | 16 | 10° to 150° | 0000000 | 00000 |
10mm | 14mm | 12mm | Steel | __ | __ | 14,000 | 3.9 | Required | 16 | 10° to 150° | 0000000 | 00000 |
12mm | 18mm | 16mm | Steel | __ | __ | 11,000 | 9 | Required | 16 | 10° to 150° | 0000000 | 00000 |
14mm | 20mm | 16mm | Steel | __ | __ | 9,500 | 12 | Required | 16 | 10° to 150° | 0000000 | 00000 |
16mm | 22mm | 16mm | Steel | __ | __ | 8,500 | 15 | Required | 16 | 10° to 150° | 0000000 | 00000 |
18mm | 24mm | 16mm | Steel | __ | __ | 7,500 | 17 | Required | 16 | 10° to 150° | 0000000 | 00000 |
20mm | 26mm | 16mm | Steel | __ | __ | 7,000 | 21 | Required | 16 | 10° to 150° | 0000000 | 00000 |
25mm | 32mm | 20mm | Steel | __ | __ | 5,500 | 45 | Required | 16 | 10° to 150° | 0000000 | 00000 |
30mm | 37mm | 20mm | Steel | __ | __ | 4,500 | 65 | Required | 16 | 10° to 150° | 0000000 | 00000 |
35mm | 42mm | 20mm | Steel | __ | __ | 3,900 | 85 | Required | 16 | 10° to 150° | 0000000 | 00000 |
Triple Row | ||||||||||||
301 Stainless Steel Springs | ||||||||||||
3/8" | 5/8" | 7/8" | Steel | 1,350 | 1,100 | 18,000 | 4 | Required | 16 | -20° to 250° | 0000000 | 00000 |
1/2" | 3/4" | 7/8" | Steel | 1,600 | 1,450 | 17,000 | 6.5 | Required | 16 | -20° to 250° | 0000000 | 00000 |
5/8" | 7/8" | 1" | Steel | 1,800 | 1,800 | 14,000 | 12 | Required | 16 | -20° to 250° | 0000000 | 00000 |
3/4" | 1" | 1" | Steel | 2,000 | 2,200 | 12,000 | 17 | Required | 16 | -20° to 250° | 0000000 | 00000 |
1" | 1 5/16" | 1.063" | Steel | 3,450 | 3,950 | 8,700 | 35 | Required | 16 | -20° to 250° | 0000000 | 00000 |
8mm | 14mm | 20mm | Steel | 940 | 680 | 21,000 | 3.2 | Required | 16 | -20° to 250° | 0000000 | 00000 |
10mm | 16mm | 20mm | Steel | 1,050 | 850 | 19,000 | 4.2 | Required | 16 | -20° to 250° | 0000000 | 00000 |
12mm | 18mm | 26mm | Steel | 1,400 | 1,300 | 19,000 | 10 | Required | 16 | -20° to 250° | 0000000 | 00000 |
16mm | 22mm | 26mm | Steel | 1,450 | 1,600 | 14,000 | 16 | Required | 16 | -20° to 250° | 0000000 | 00000 |
20mm | 26mm | 26mm | Steel | 1,800 | 2,100 | 11,000 | 24 | Required | 16 | -20° to 250° | 0000000 | 00000 |
25mm | 32mm | 30mm | Steel | 2,500 | 2,900 | 8,700 | 50 | Required | 16 | -20° to 250° | 0000000 | 00000 |
30mm | 37mm | 30mm | Steel | 2,550 | 3,350 | 7,300 | 70 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Shaft Liners for Precision Needle-Roller Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/792/7929k8p2-d03c-digital@halfx_637052144336859680.png?ver=imagenotfound)
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts. The liner fits between the roller and the shaft.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Wd. | Ring Material | Lubrication | Specifications Met | Each | |
3/8" | 5/8" | 0.76" | Steel | Required | __ | 000000 | 000000 |
3/8" | 5/8" | 1.01" | Steel | Required | __ | 0000000 | 00000 |
1/2" | 3/4" | 0.76" | Steel | Required | __ | 000000 | 00000 |
1/2" | 3/4" | 1.01" | Steel | Required | __ | 0000000 | 00000 |
5/8" | 7/8" | 0.76" | Steel | Required | __ | 000000 | 00000 |
5/8" | 7/8" | 1.01" | Steel | Required | __ | 0000000 | 00000 |
3/4" | 1" | 0.76" | Steel | Required | __ | 000000 | 00000 |
3/4" | 1" | 1.01" | Steel | Required | __ | 0000000 | 00000 |
7/8" | 1 1/8" | 1.01" | Steel | Required | __ | 000000 | 00000 |
7/8" | 1 1/8" | 1.26" | Steel | Required | __ | 0000000 | 00000 |
1" | 1 1/4" | 1.01" | Steel | Required | __ | 000000 | 00000 |
1" | 1 1/4" | 1.26" | Steel | Required | __ | 0000000 | 00000 |
1 1/8" | 1 3/8" | 1.01" | Steel | Required | __ | 000000 | 00000 |
1 1/4" | 1 1/2" | 1.01" | Steel | Required | __ | 000000 | 00000 |
1 1/4" | 1 1/2" | 1.26" | Steel | Required | __ | 0000000 | 00000 |
1 1/2" | 1 3/4" | 1.01" | Steel | Required | __ | 000000 | 00000 |
1 1/2" | 1 3/4" | 1.26" | Steel | Required | __ | 00000000 | 00000 |
1 3/4" | 2 1/4" | 1.51" | Steel | Required | __ | 00000000 | 00000 |
1 3/4" | 2 1/4" | 1.76" | Steel | Required | __ | 00000000 | 00000 |
2" | 2 1/2" | 1.76" | Steel | Required | __ | 00000000 | 00000 |
2 1/2" | 3" | 1.76" | Steel | Required | __ | 00000000 | 00000 |
5mm | 8mm | 12mm | Steel | Required | DIN 620 | 0000000 | 0000 |
7mm | 10mm | 12mm | Steel | Required | DIN 620 | 0000000 | 0000 |
9mm | 12mm | 16mm | Steel | Required | DIN 620 | 0000000 | 0000 |
10mm | 14mm | 16mm | Steel | Required | DIN 620 | 0000000 | 0000 |
12mm | 15mm | 16mm | Steel | Required | DIN 620 | 0000000 | 0000 |
15mm | 18mm | 16mm | Steel | Required | DIN 620 | 0000000 | 00000 |
17mm | 20mm | 20mm | Steel | Required | DIN 620 | 0000000 | 00000 |
20mm | 25mm | 16mm | Steel | Required | DIN 620 | 0000000 | 00000 |
25mm | 30mm | 20mm | Steel | Required | DIN 620 | 0000000 | 00000 |
Precision Needle-Roller Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/792/7929k47p3-d03c-digital@halfx_637052154135006666.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/792/7929k8p2-d03c-digital@halfx_637052144336859680.png?ver=imagenotfound)
Install these bearings directly onto hardened and ground shafts. They have higher load capacity, speed, and accuracy than standard needle-roller bearings.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants.
Shaft liners allow you to use the bearing on unhardened and unground shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radial Load Cap., lbs. | Optional Shaft Liners | |||||||||||||
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range., °F | Each | For Shaft Dia. | Each | ||
Open | ||||||||||||||
5/8" | 1 1/8" | 3/4" | Steel | 3,900 | 4,800 | 21,000 | Required | 16 | 0° to 245° | 0000000 | 000000 | 3/8" | 000000 | 000000 |
3/4" | 1 1/4" | 3/4" | Steel | 4,500 | 6,000 | 17,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1/2" | 000000 | 00000 |
7/8" | 1 3/8" | 3/4" | Steel | 4,700 | 6,700 | 15,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 5/8" | 000000 | 00000 |
1" | 1 1/2" | 3/4" | Steel | 5,200 | 7,900 | 13,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 3/4" | 000000 | 00000 |
1 1/8" | 1 5/8" | 1" | Steel | 7,600 | 13,200 | 12,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 7/8" | 000000 | 00000 |
1 1/4" | 1 3/4" | 1" | Steel | 7,900 | 14,200 | 11,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1" | 000000 | 00000 |
1 3/8" | 1 7/8" | 1" | Steel | 8,400 | 15,900 | 10,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/8" | 000000 | 00000 |
1 1/2" | 2 1/16" | 1" | Steel | 8,100 | 16,000 | 9,000 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/4" | 000000 | 00000 |
1 3/4" | 2 5/16" | 1" | Steel | 9,900 | 19,700 | 7,600 | Required | 16 | 0° to 245° | 0000000 | 00000 | 1 1/2" | 000000 | 00000 |
2" | 2 9/16" | 1 1/4" | Steel | 13,300 | 29,900 | 6,700 | Required | 16 | 0° to 245° | 00000000 | 00000 | __ | 000000 | 00 |
2 1/4" | 3" | 1 1/2" | Steel | 15,100 | 33,200 | 5,900 | Required | 16 | 0° to 245° | 00000000 | 00000 | 1 3/4" | 00000000 | 00000 |
2 1/2" | 3 1/4" | 1 1/2" | Steel | 15,800 | 36,400 | 5,300 | Required | 16 | 0° to 245° | 00000000 | 00000 | __ | 000000 | 00 |
2 3/4" | 3 1/2" | 1 1/2" | Steel | 16,400 | 39,600 | 4,800 | Required | 16 | 0° to 245° | 00000000 | 00000 | __ | 000000 | 00 |
5mm | 10mm | 10mm | Steel | 590 | 430 | 39,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | __ | 000000 | 00 |
6mm | 12mm | 12mm | Steel | 850 | 700 | 36,500 | Required | 4 | 0° to 245° | 0000000 | 00000 | __ | 000000 | 00 |
8mm | 15mm | 12mm | Steel | 890 | 920 | 29,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 5 mm | 0000000 | 0000 |
10mm | 17mm | 12mm | Steel | 1,050 | 1,200 | 27,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 7 mm | 0000000 | 0000 |
12mm | 19mm | 16mm | Steel | 2,000 | 2,450 | 25,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 9 mm | 0000000 | 0000 |
14mm | 22mm | 16mm | Steel | 2,250 | 2,600 | 24,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 10 mm | 0000000 | 0000 |
15mm | 23mm | 16mm | Steel | 2,700 | 2,850 | 23,500 | Required | 4 | 0° to 245° | 0000000 | 00000 | 12 mm | 0000000 | 0000 |
18mm | 26mm | 16mm | Steel | 2,800 | 3,650 | 21,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 15 mm | 0000000 | 00000 |
20mm | 28mm | 20mm | Steel | 4,150 | 5,350 | 21,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 17 mm | 0000000 | 00000 |
25mm | 33mm | 16mm | Steel | 3,350 | 5,000 | 17,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 20 mm | 0000000 | 00000 |
30mm | 40mm | 20mm | Steel | 5,100 | 8,100 | 14,000 | Required | 4 | 0° to 245° | 0000000 | 00000 | 25 mm | 0000000 | 00000 |
Sealed | ||||||||||||||
5/8" | 1 1/8" | 1" | Steel | 4,300 | 4,300 | 6,100 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 3/8" | 0000000 | 00000 |
3/4" | 1 1/4" | 1" | Steel | 4,950 | 5,400 | 5,100 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1/2" | 0000000 | 00000 |
7/8" | 1 3/8" | 1" | Steel | 5,250 | 6,000 | 4,400 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 5/8" | 0000000 | 00000 |
1" | 1 1/2" | 1" | Steel | 5,800 | 7,100 | 3,800 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 3/4" | 0000000 | 00000 |
1 1/8" | 1 5/8" | 1 1/4" | Steel | 8,700 | 12,200 | 3,400 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 7/8" | 0000000 | 00000 |
1 1/4" | 1 3/4" | 1 1/4" | Steel | 9,000 | 13,100 | 3,000 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1" | 0000000 | 00000 |
1 1/2" | 2 1/16" | 1 1/4" | Steel | 10,300 | 15,500 | 2,500 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1 1/4" | 0000000 | 00000 |
1 3/4" | 2 5/16" | 1 1/4" | Steel | 9,900 | 19,700 | 2,200 | Required | 16 | -30° to 250° | 00000000 | 00000 | 1 1/2" | 00000000 | 00000 |
2 1/4" | 3" | 1 3/4" | Steel | 15,100 | 33,200 | 1,700 | Required | 16 | -30° to 250° | 00000000 | 000000 | 1 3/4" | 00000000 | 00000 |
2 1/2" | 3 1/4" | 1 3/4" | Steel | 15,800 | 36,400 | 1,500 | Required | 16 | -30° to 250° | 00000000 | 000000 | 2" | 00000000 | 00000 |
2 3/4" | 3 1/2" | 1 3/4" | Steel | 16,300 | 39,600 | 1,400 | Required | 16 | -30° to 250° | 00000000 | 000000 | __ | 000000 | 00 |
3" | 3 3/4" | 1 3/4" | Steel | 17,600 | 44,200 | 1,300 | Required | 16 | -30° to 250° | 00000000 | 000000 | 2 1/2" | 00000000 | 00000 |