We will reply to your message within an hour.
More
Commonly used in ice machines and other water applications, this tubing is treated to protect against degradation caused by bacteria, yeast, fungi, and mold.
This general purpose tubing is the industry standard for air and water applications.
Remove accumulated water from pits, loading docks, and other flooded areas with this general purpose suction hose.
Draw water out of pits, loading docks, and other areas prone to flooding through lines connected by cam-and-groove fittings.
Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.
Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.
Safely suction, transfer, and dispense drinking water.
Drain water from one place to another. Hose lays flat and folds up for carrying and storage.
Made of SBR rubber, this hose and its cover are tough enough to resist wear and tear.
Certified to meet NSF/ANSI 61, this hose is safe for use in drinking water systems.
To prevent breaking down from contact with oil, animal fats, and grease as you wash down equipment with hot water, this hose is covered in blended rubber. It comes with fittings already attached, so it’s easy to connect to a washdown station and wash gun.
The blended rubber cover on this hose won't break down if exposed to oil, animal fats, or grease as you wash down equipment with hot water.
Wash down equipment in food-processing plants, dairies, and other facilities with hot water.
Bend this hose in any direction and it won’t kink, even when routed through tight spaces.
Take the strain out of draining bulky hose. These drainers help you lift the hose enough for gravity to drain any remaining fluid, so you don’t have to bend over or shake it out.
Pipe has a snap-together design that allows you to quickly connect to fittings with no cement required. It is typically used in gravity-flow drainage applications.
The snap-together design allows you to quickly connect these fittings to pipe with no cement required. Fittings are typically used in gravity-flow drainage applications.
This pipe has thinner walls than Schedule 40 pipe, so it’s lighter in weight and has more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines.
With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.
These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.
These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.
Bolt two same-size flanges together with a gasket to create an access point within a line. Flanges are an economical option for gravity-flow chemical waste systems. They are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.
This pipe is an economical choice for gravity-flow chemical waste systems. Pipe is ABS plastic, which has excellent strength and impact resistance and good chemical resistance.
Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it is NSF certified for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances.
Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies.
Made of polypropylene, this gravity-flow pipe stands up to tough organic solvents, such as acetone, that would dissolve CPVC pipe. You can also use it for lines with highly corrosive acids, such as hydrochloric acid, and alkalies.
These fittings are NSF certified for use in corrosive waste gravity-flow systems. Made of CPVC, they have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances.
Use this pipe in gravity-flow applications both above and below ground.
Also known as no-hub pipe fittings and soil pipe fittings, these fittings are for use in gravity-flow applications both above and below ground.
Connect sink drains that are offset from wall drain outlets.
Prevent sewer gas from entering your building. Traps swivel and adjust vertically for convenient installation.
Loosen the knobs on these J-bends to clean them out without removing them from your pipe system.
Use these J-bends as replacement parts for P-traps and S-traps.
Use these flanged tailpieces to connect a sink drain to a P-trap or S-trap.
Use these extensions to help connect drain tailpieces to drain traps.
Connect two drains to a single outlet.
Drain water from washing machines and dishwashers.
Kits include tubing, a backflow-prevention valve, an adapter, and a clamp.