DIN 1 Dowel Pins | McMaster-Carr

Filter by

System of Measurement

Large End Diameter

Small End Diameter

Length

Material

Fastener Head Type

Shaft Type

End Shape

Pin Type

Rate of Taper

End Type

Specifications Met

Minimum Hardness

REACH

RoHS

Export Control Classification Number (ECCN)

DFARS Specialty Metals

Breaking Strength

Passivation

Forward

How can we improve?

116 Products

Taper Pins

Often used for positioning components and securing assemblies, these pins taper at a uniform rate to fit snugly in tapered holes. They have slightly rounded edges to aid insertion. To install, create a tapered hole using a taper-pin drill bit that matches the pin number for inch sizes or the small end diameter for metric. To remove, hit the small end of the pin with a punch to drive it out.

Metric

Metric pins meet DIN 1 specifications.

Carbon Steel—Carbon steel pins have good strength.

Breaking Strength—Breaking strength is measured as single shear, which is the force required to break the pin into two pieces.

						Carbon Steel				303 Stainless Steel
	Lg., mm	Large End Dia., mm	Rate of Taper	Min. Hardness	Specs. Met	Breaking Strength	Pkg. Qty.		Pkg.	Breaking Strength	Pkg. Qty.		Pkg.
1.5 mm Small End Diameter


		10	1.7	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
		12	1.8	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	0000

		2 mm Small End Diameter


				10	2.2	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
				16	2.3	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
				20	2.4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
				24	2.5	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
				30	2.6	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000

				2.5 mm Small End Diameter


						16	2.8	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
						20	2.9	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
						30	3.1	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000

						3 mm Small End Diameter


								16	3.3	1:50	Rockwell B52	DIN 1	Not Rated	25	000000000	00000	—	—	———	0
								16	3.3	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
								20	3.4	1:50	Rockwell B52	DIN 1	Not Rated	25	000000000	0000	—	—	———	0
								20	3.4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
								24	3.5	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
								32	3.6	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
								32	3.6	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
								36	3.7	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
								40	3.8	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
								40	3.8	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
								50	4	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	00000	—	—	———	0
								50	4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
								60	4.2	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	00000	—	—	———	0

								4 mm Small End Diameter


										16	4.3	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	5	000000000	00000
										20	4.4	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
										20	4.4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										24	4.5	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										26	4.5	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
										30	4.6	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
										30	4.6	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										36	4.7	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										40	4.8	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	00000	—	—	———	0
										40	4.8	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										45	4.9	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
										45	4.9	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										50	5	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	00000	—	—	———	0
										50	5	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
										60	5.2	1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	0000	—	—	———	0
										60	5.2	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000

										5 mm Small End Diameter


												20	5.4	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
												20	5.4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
												26	5.5	1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	0000	—	—	———	0
26												5.5	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
30	5.6											1:50	Rockwell B52	DIN 1	Not Rated	10	000000000	00000	—	—	———	0
30	5.6											1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
36	5.7											1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
40	5.8											1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	0000	—	—	———	0
40	5.8											1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	0000
45	5.9	1:50										Rockwell B52	DIN 1	Not Rated	5	000000000	0000	—	—	———	0
45	5.9	1:50	Rockwell B85									DIN 1	—	—	———	0	Not Rated	1	000000000	0000
50	6	1:50	Rockwell B52									DIN 1	Not Rated	5	000000000	0000	—	—	———	0
50	6	1:50	Rockwell B85									DIN 1	—	—	———	0	Not Rated	1	000000000	0000
55	6.1	1:50	Rockwell B52									DIN 1	Not Rated	5	000000000	0000	—	—	———	0
60	6.2	1:50	Rockwell B52									DIN 1	Not Rated	5	000000000	0000	—	—	———	0
60	6.2	1:50	Rockwell B85									DIN 1	—	—	———	0	Not Rated	1	000000000	0000
70	6.4	1:50	Rockwell B85									DIN 1	—	—	———	0	Not Rated	1	000000000	00000

6 mm Small End Diameter


		20	6.4	1:50	Rockwell B52							DIN 1	Not Rated	25	000000000	00000	—	—	———	0
		20	6.4	1:50	Rockwell B85							DIN 1	—	—	———	0	Not Rated	1	000000000	0000
		26	6.5	1:50	Rockwell B52							DIN 1	Not Rated	10	000000000	0000	—	—	———	0
		30	6.6	1:50	Rockwell B52							DIN 1	Not Rated	10	000000000	00000	—	—	———	0
		30	6.6	1:50	Rockwell B85							DIN 1	—	—	———	0	Not Rated	1	000000000	0000
		36	6.7	1:50	Rockwell B85	DIN 1						—	—	———	0	Not Rated	1	000000000	0000
		40	6.8	1:50	Rockwell B52	DIN 1	Not Rated					10	000000000	00000	—	—	———	0
		40	6.8	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	0000
		45	6.9	1:50	Rockwell B52	DIN 1	Not Rated					5	000000000	0000	—	—	———	0
		45	6.9	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	0000
		50	7	1:50	Rockwell B52	DIN 1	Not Rated					10	000000000	00000	—	—	———	0
		50	7	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	0000
		55	7.1	1:50	Rockwell B52	DIN 1	Not Rated					5	000000000	0000	—	—	———	0
		55	7.1	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	0000
		60	7.2	1:50	Rockwell B52	DIN 1	Not Rated					10	000000000	00000	—	—	———	0
		60	7.2	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	0000
		70	7.4	1:50	Rockwell B52	DIN 1	Not Rated					5	000000000	00000	—	—	———	0
		70	7.4	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	00000
		80	7.6	1:50	Rockwell B52	DIN 1	Not Rated					5	000000000	00000	—	—	———	0
		80	7.6	1:50	Rockwell B85	DIN 1	—					—	———	0	Not Rated	1	000000000	00000

		8 mm Small End Diameter


				26	8.5	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				30	8.6	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				30	8.6	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	0000
				36	8.7	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	0000
				40	8.8	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				40	8.8	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	0000
				45	8.9	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				45	8.9	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	0000
				50	9	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				50	9	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000
				55	9.1	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				55	9.1	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000
				60	9.2	1:50	Rockwell B52	DIN 1	Not Rated			5	000000000	00000	—	—	———	0
				60	9.2	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000
				70	9.4	1:50	Rockwell B52	DIN 1	Not Rated			1	000000000	0000	—	—	———	0
				70	9.4	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000
				80	9.6	1:50	Rockwell B52	DIN 1	Not Rated			1	000000000	0000	—	—	———	0
				80	9.6	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000
				100	10	1:50	Rockwell B85	DIN 1	—			—	———	0	Not Rated	1	000000000	00000

				10 mm Small End Diameter


						30	10.6	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						40	10.8	1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	00000	—	—	———	0
						40	10.8	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						45	10.9	1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	00000	—	—	———	0
						45	10.9	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						50	11	1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	00000	—	—	———	0
						50	11	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						55	11.1	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						55	11.1	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						60	11.2	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						60	11.2	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						70	11.4	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						70	11.4	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000
						80	11.6	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						100	12	1:50	Rockwell B85	DIN 1	—	—	———	0	Not Rated	1	000000000	00000

12 mm Small End Diameter


						40	12.8	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						50	13	1:50	Rockwell B52	DIN 1	Not Rated	5	000000000	00000	—	—	———	0
						55	13.1	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						60	13.2	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						70	13.4	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0
						80	13.6	1:50	Rockwell B52	DIN 1	Not Rated	1	000000000	0000	—	—	———	0