McMaster-Carr logo
    Filter by
    Material
    System of Measurement
    End Shape
    Pin Type
    Shaft Type
    Fastener Head Type
    Industrial Info Snippet
    Minimum Hardness
    Tolerance Rating
    End Type
    Double Shear Breaking Strength
    USMCA Qualifying
    RoHS Compliance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    18 Products

    Dowel Pins
    3D CAD models available

    Image of Product. Front orientation. Dowel Pins. Plain Head, Standard Tolerance.
    Precisely align machine parts and prevent movement during assembly. These dowel pins are machined to tight tolerances and have a uniform diameter for a snug fit. They can also be used as a pivot, shaft, or hinge to join moving components. Since dowel pins can be hard to remove, they are best suited for permanent fixtures that don't require frequent adjustments or disassembly.
    Lightweight Corrosion-Resistant Titanium
    Grade 2 Titanium—The best of both worlds, these pins are lightweight like aluminum and as corrosion resistant as 316 stainless steel. Because Grade 2 titanium is 99% pure, it's even more corrosion resistant than other common titanium grades, such as Grades 5 and 9. This makes them ideal for use in chemical-processing and water-treatment facilities since they stand up to strong acids and other harsh chemicals.
    Lg.
    Dia. Tolerance
    Double Shear
    Breaking
    Strength
    Min.
    Hardness
    Each
    Grade 2 Titanium
     
    1/8" Diameter
    1/4"0.0001" to 0.0003"Not RatedNot Rated000000000000000
    5/16"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    3/16" Diameter
    3/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    1/4" Diameter
    1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    5/8"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    3/4"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    1 1/2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
    2"0.0001" to 0.0003"Not RatedNot Rated00000000000000
     
    back to top