We will reply to your message within an hour.
Create strong, permanent bonds that can replace mechanical fasteners.
Use this clear tape for strong, invisible bonds.
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
This tape can withstand temperatures up to 300° F.
The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
Cut these sheets to create a customized, permanent bond in the shape you need.
Use these clear sheets for strong, invisible bonds.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
Use these clear shapes for strong, invisible bonds.
Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.
Cut these sheets to the shape you need for a custom fit.
Tape is cut into convenient discs and rectangles.
Mount lightweight signs and trim with this economical tape.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Use this tape outdoors for sealing and mounting signs and security control panels.
Prevent the spread of fire while sealing, cushioning, and damping vibration. This tape has adhesive on both sides.
Remove mounted objects from most surfaces without leaving residue behind.
Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.
Often used to install carpet, padding, and linoleum.
Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.
Use this transparent tape for laminating, splicing, and mounting, even on hard-to-bond plastics. It has adhesive on both sides.
The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.
Particle and residue free, this tape meets clean room requirements. It has adhesive on both sides.
This thin paper tape has a high-bond adhesive on both sides that sticks to glossy surfaces and hard-to-bond plastics.
With a higher level of clarity than standard tape, this tape is good for joining layers of material that need light to pass through, such as clear plastic and glass.
Made with fire-retardant cotton cloth, this tape is often used to install carpet, padding, and linoleum on stairs and floors.
A permanent adhesive on one side of this tape stays put, while a tacky adhesive on the other side lets you open and close bags or reposition signs.
This tape has adhesive on both sides and can be removed and repositioned without leaving residue behind. It meets clean room requirements.
Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.
The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.
Tri-directional fiberglass strands provide extra strength.
Wet the adhesive on this gummed kraft paper tape to secure corrugated, printed, and overstuffed cartons.
When tape is removed, a red layer stays behind to indicate the package has been opened.
Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.
Create dams in pipes before welding, then wash away with water or steam.
Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.
Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.
Use these tapes for light duty mending and holding.
Temporarily mount drawings and blueprints —this tape releases cleanly without damaging paper.
A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.
Use this crepe paper tape for sharp paint lines.
Use these crepe paper discs to mask areas while spray painting, as well as to temporarily cover holes for dust protection.
The adhesive on this crepe paper tape won't damage painted and finished surfaces.
This crepe paper tape keeps its hold, even on 300° F surfaces.
A high-tack adhesive on one side of this crepe paper tape sticks to plastic sheeting, and a clean-release adhesive on the other side prevents surface damage. Also known as containment tape.
Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.
In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.
Outline and draw attention to safety zones and hazards with this tape.
Seal out light to mask LEDs and prevent backlight bleed on LCD monitors with this opaque polyester tape.
Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.
Just like a gecko clings to a wall, this tape has microscopic fingers to grip smooth surfaces. It removes cleanly and can be reused.
This chemical-resistant tape has adhesive on both sides.
This traditional black cotton electrician's tape provides an abrasion-resistant shield for wrapping low-voltage splices.
Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.
This perforated label tape works with Dymo LabelWriter printers.
Use this tape with Sato Primark printers.
Use these labels with a thermal-transfer printer for smudgeproof results.
Run these sheets of labels through any standard laser or inkjet printer.
Good for large-volume jobs, these labels come on perforated sheets that can be fed continuously through a pin-feed printer.
Use color to identify equipment, materials, and documents at a glance.
Includes blue, green, red, and yellow labels for color coding to identify equipment, materials, and documents at a glance. These labels easily peel off when they’re no longer needed.
Easily peel these labels off when they’re no longer needed. Use them for color coding to identify equipment, materials, and documents at a glance.
Point to small areas on equipment such as circuit boards.
A layer of aluminum foil in these labels will set off metal detectors if they fall into your food-processing line.
Protect messages from moisture and smudging with the clear laminating flap.
Choose from labels with numbers or days of the week to keep track of inventory.
Mark items in a sequence with labels numbered 001 to 500.
Mark parts and products that have been made in the United States.
Make your markings stand out with this fluorescent tape.
Permanently mount these rulers to a machine or workbench.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
The 3M VHB adhesive on these rolls offers a strong hold that can replace rivets, spot welds, and other permanent fasteners.
This silicone glue withstands temperatures up to 500° F.
Use these glue rolls with 3M dispensing guns.
Pull off a small piece of putty and stick lightweight objects to a surface.
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
Tape hides seams and smooths out corners. Joint compound is required for bonding and finishing.