Roller Track for Doors
Combine track, mounting brackets, hangers, and end stops to create a system for hanging doors.
Powder-coated steel components are durable, so they resist wear and tear over time. Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors. 304 stainless steel components have better corrosion resistance than galvanized steel and powder-coated steel components. They won’t rust when exposed to mild chemicals or detergents. 316 stainless steel components are the most corrosion resistant option. They maintain their strength when exposed to harsh chemicals, including bleach, chlorine, and phosphoric acid.
Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Ceiling-mount brackets wrap around the outside of track and mount to the ceiling to act as supports and joints. Bolt them to joists or hang them from threaded rod. Brackets are required every 2 ft. of track.
Support brackets mount the track in the desired location.
Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
Suspended brackets provide clearance between your track and ceiling. The two mounting holes also provide more track stability than standard ceiling mount brackets.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
Without Debris Cap | With Debris Cap | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | Beige | No | 7/16" | 0000000 | 000000 | 0000000 | 000000 |
| 400 | 1 3/4" | 3 3/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 800 | 2 5/8" | 4 3/4" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 1,000 | 2 5/8" | 5" | Beige | No | 11/16" | 0000000 | 00000 | 0000000 | 00000 |
| 5,000 | 2 13/16" | 6" | Beige | No | 13/16" | 00000000 | 00000 | 00000000 | 00000 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 1,000 | 2 5/8" | 5" | __ | No | 11/16" | 00000000 | 00000 | 000000 | 00 |
304 Stainless Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
Suspended Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | Beige | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | __ | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
316 Stainless Steel | |||||||||
| 300 | 1 3/8" | 2 7/8" | __ | No | 3/8" | 00000000 | 000000 | 000000 | 00 |
Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 400 | 1 3/4" | 3 3/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 4 3/4" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 5" | Beige | No | 11/16" | 0000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 6" | Beige | No | 13/16" | 00000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
Zinc-Plated Steel | |||||||||
| 1,000 | 2 5/8" | 5" | __ | No | 11/16" | 00000000 | 00000 | 000000 | 00 |
304 Stainless Steel | |||||||||
| 400 | 1 3/4" | 3 3/16" | __ | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 4 9/16" | __ | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
Suspended Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 4 1/4" | __ | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
316 Stainless Steel | |||||||||
| 300 | 1 3/8" | 2 7/8" | __ | No | 3/8" | 00000000 | 000000 | 000000 | 00 |
Wall-mount brackets wrap around the outside of track and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
Support brackets are used to mount the track in the desired location. Those with a center stop provide support and a door stop at the center for bi-parting door installations.
Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
Double-track brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
Brackets with a debris cap keep dirt and debris out of the track and roller. They will not prevent the hanger from rolling off the track.
Without Debris Cap | With Debris Cap | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Track Capacity, lbs. | For Inside Track Wd. | Ht. | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | Each | ||
Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | Beige | No | 7/16" | 0000000 | 000000 | 0000000 | 000000 |
| 400 | 1 3/4" | 4 11/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | Black | No | 9/16" | 00000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 7 3/16" | Beige | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
| 800 | 2 5/8" | 7 3/16" | Black | No | 9/16" | 00000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 7 5/16" | Beige | No | 11/16" | 0000000 | 00000 | 0000000 | 00000 |
| 1,000 | 2 5/8" | 7 5/16" | Black | No | 11/16" | 00000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 8 3/16" | Beige | No | 13/16" | 0000000 | 00000 | 0000000 | 000000 |
| 5,000 | 2 13/16" | 8 3/16" | Black | No | 13/16" | 00000000 | 0000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 00000 | 0000000 | 00000 |
Zinc-Plated Steel | |||||||||
| 1,000 | 2 5/8" | 7 5/16" | __ | No | 11/16" | 00000000 | 00000 | 000000 | 00 |
304 Stainless Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 | 0000000 | 00000 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 000000 | 0000000 | 000000 |
316 Stainless Steel | |||||||||
| 300 | 1 3/8" | 4 1/8" | __ | No | 3/8" | 00000000 | 000000 | 000000 | 00 |
Support Brackets with Center Stop | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 7 15/16" | Beige | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
| 400 | 1 3/4" | 7 15/16" | Black | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
| 600 | 2 1/4" | 10 3/8" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 800 | 2 5/8" | 10 1/2" | Beige | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 1,000 | 2 5/8" | 10 9/16" | Beige | No | 11/16" | 00000000 | 000000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 7 15/16" | __ | No | 7/16" | 00000000 | 000000 | 000000 | 00 |
Zinc-Plated Steel | |||||||||
| 600 | 2 1/4" | 10 3/8" | __ | No | 9/16" | 00000000 | 000000 | 000000 | 00 |
| 1,000 | 2 5/8" | 7 5/16" | __ | No | 11/16" | 00000000 | 000000 | 000000 | 00 |
Double-Track Support Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 00000000 | 00000 |
| 400 | 1 3/4" | 8" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 8" | __ | No | 7/16" | 00000000 | 00000 | 00000000 | 00000 |
Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | Beige | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 400 | 1 3/4" | 4 11/16" | Black | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 800 | 2 5/8" | 7 3/16" | Beige | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
| 1,000 | 2 5/8" | 7 5/16" | Beige | No | 11/16" | 0000000 | 00000 | 000000 | 00 |
| 5,000 | 2 13/16" | 8 3/16" | Beige | No | 13/16" | 0000000 | 000000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 00000 | 000000 | 00 |
Zinc-Plated Steel | |||||||||
| 1,000 | 2 5/8" | 7 5/16" | __ | No | 11/16" | 00000000 | 000000 | 000000 | 00 |
304 Stainless Steel | |||||||||
| 400 | 1 3/4" | 4 11/16" | __ | No | 7/16" | 0000000 | 00000 | 000000 | 00 |
| 600 | 2 1/4" | 7 1/16" | __ | No | 9/16" | 0000000 | 000000 | 000000 | 00 |
316 Stainless Steel | |||||||||
| 300 | 1 3/8" | 4 1/8" | __ | No | 3/8" | 00000000 | 000000 | 000000 | 00 |
Double-Track Joint Brackets | |||||||||
Powder-Coated Steel | |||||||||
| 400 | 1 3/4" | 8" | Beige | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Galvanized Steel | |||||||||
| 400 | 1 3/4" | 8" | __ | No | 7/16" | 00000000 | 00000 | 000000 | 00 |
Dust-Resistant Roller Track for Doors
Round track reduces edges where dust and debris can accumulate. Combine track, hangers, and accessories to create a system for hanging doors. For durability and corrosion resistance, the track is made of galvanized steel.
Door stops (sold separately) mount to the floor to keep sliding doors and panels from damaging walls and door frames.
For technical drawings and 3-D models, click on a part number.
Wraparound
Support Bracket
Wraparound
Support Bracket
Use support brackets to install track that doesn't come with a wall-mount bracket. One bracket is required for every two ft. of track. Flat support brackets have a rivet that slides into the slot on the track to lock them in place. Wraparound support brackets have a collar that surrounds the track for extra support. They install anywhere along the length of the track. Adjust the distance between the track and the wall to fit the width of your door. Double-track wraparound support brackets hold two parallel track pieces. You can use them to create a bypassing door system when there isn’t enough space to accommodate a full-sized door.
Use wall-mount adapter brackets to convert a wraparound joint bracket into a wall-mount support bracket.
Curved Roller Track for Doors, Curtains, and Strip Doors
Curved and straight track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors. Combine track, mounting brackets, and hangers that fit the same inside track width to create a system. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
All brackets mount to ceiling joists or hang from threaded rod. One support bracket is required for every 4 ft. of 100-lb. capacity track and every 5 ft. of 600-lb. capacity track. Joint brackets hold adjoining sections of track together. Wall-mount adapter bracket converts a support or joint bracket into a wall-mount bracket.
For technical drawings and 3-D models, click on a part number.
| For Inside Track Wd. | Ht. | Material | Color | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
For 100-lb. Track Capacity | |||||||
|---|---|---|---|---|---|---|---|
Suspended Joint | |||||||
| 1 3/8" | 4" | Galvanized Steel | __ | No | 3/8" | 0000000 | 000000 |
Suspended Support | |||||||
| 1 3/8" | 4" | Galvanized Steel | __ | No | 3/8" | 0000000 | 00000 |
For 600-lb. Track Capacity | |||||||
Joint | |||||||
| 1 3/4" | 3 15/16" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 000000 |
Support | |||||||
| 1 3/4" | 3 15/16" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 00000 |
Wall-Mount Adapter | |||||||
| 1 3/4" | 2 1/2" | Powder-Coated Steel | Beige | No | 9/16" | 0000000 | 00000 |
Corrosion-Resistant I-Beam Roller Track for Doors and Curtains
Build your own system for hanging doors and curtains in marine environments. The track is anodized aluminum and the hangers are 316 stainless steel for corrosion resistance. Combine track, hangers, joints, and accessories for a complete system.
For technical drawings and 3-D models, click on a part number.
