About Cabinet Door and Drawer Locks
More
About AC to AC Voltage Transformers
For single-phase equipment, use this formula to find power output: VA = Volts × Amps
For three-phase equipment, use this formula to find power output: VA = Volts × Amps × 1.73
More
Strike Plates for Door Handles and Knobs
Plates with extended lip prevent latches from damaging door frames when your door is set deep in the frame.
For technical drawings and 3-D models, click on a part number.
Strike Plates for Deadbolt Door Locks
and
Wood Doors
For technical drawings and 3-D models, click on a part number.
Mounting Plates for Door Handles and Knobs
Use these mounting plates to reinforce the door around your handle to guard against forced entry. Select a mounting plate with the correct backset distance (the distance from the door’s edge to the center of your handle's mounting hole) for your door.
For technical drawings and 3-D models, click on a part number.
2 3/8" Backset Distance | 2 3/4" Backset Distance | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Through Hole Dia. | For Door Material | Mounting Hardware Included | Wd. | Each | Wd. | Each | |||
Polished Brass-Plated Brass | |||||||||||
| A | 1 3/8" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 000000 | 4 1/4" | 0000000 | 000000 |
| A | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
Dull Stainless Steel | |||||||||||
| A | 1 3/8" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
| A | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4" | 0000000 | 00000 | 4 1/4" | 0000000 | 00000 |
| B | 1 3/4" | 9" | 2 1/8" | Metal, Wood | Yes | 4 3/4" | 00000000 | 00000 | 4 3/4" | 00000000 | 00000 |
Mounting Plates for Pry-Resistant Door Handles and Knobs
Use these mounting plates to reinforce the door around your pry-resistant handle to guard against forced entry. Backset distance is the distance from the door’s edge to the center of the handle's mounting hole.
For technical drawings and 3-D models, click on a part number.
Electric Door Strike Plates for Door Handles and Knobs
All of these strike plates can be used with door handles and knobs. The ROFU 1510 and Rutherford S65 strike plates can also be used with pry-resistant door handles and knobs. Use them all to regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
Rutherford and Von Duprin strike plates meet UL 1034 for burglary resistance.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength, lbs. | AC | DC | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Appearance | Choose a Finish | Each | |
ROFU 1509 | |||||||||||||||
| 5/8" | 3 1/2" | 1" | 1 1/8" | 7 15/16" | 1 7/16" | 1,000 | 8V-16V | 3V-6V | Metal, Wood | Left, Right | Yes | Dull | Aluminum Coated | 0000000 | 0000000 |
ROFU 1510 | |||||||||||||||
| 11/16" | 2 15/16" | 13/16" | 1 1/2" | 5 7/8" | 1 1/4" | 800 | 8V-16V | __ | Wood | Left, Right | Yes | Satin | Satin Chrome | 0000000 | 000000 |
Rutherford S65 | |||||||||||||||
| 3/4" | 3 3/8" | 5/8" | 1 3/16" | 4 7/8" | 1 1/4" | 1,000 | 12V-24V | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | __ | 0000000 | 000000 |
Von Duprin 5100 | |||||||||||||||
| 1/2" | 3 3/8" | 1" | 1 3/8" | 4 7/8" | 1 1/4" | 1,000 | __ | 12V/24V | Metal, Wood | Left, Right | Yes | Dull | 000000 | 000000 | |
Universal Electric Door Strike Plates
These versatile strike plates are for use with door handles and knobs, pry-resistant door handles and knobs, and pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. All of these strike plates must be hardwired. They meet UL 1034 for burglary resistance.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Faceplate | Voltage | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Ht. | Wd. | Holding Strength | AC | DC | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Rutherford F2 | ||||||||||||||
| 3/4" | 3 1/4" | 1 5/8" | 1 5/8" | 4 37/64" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 000000 | 0000000 |
HES 1600 | ||||||||||||||
| 1 11/16" | 3 1/4" | 1 5/8" | 1 3/8" | 4 7/8" | 1 1/4" | 1,500 lbs. | 12V-24V | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 00000000 | 000000 |
Electric Door Strike Plates for Touch Bars and Crossbars
Use these strike plates with touch bars and crossbars, but not pry-resistant crossbars. They regulate access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Then, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge).
For technical drawings and 3-D models, click on a part number.
Faceplate | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Holding Strength | DC Voltage | Material | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
HES 9600 | ||||||||||
| 3/4" | 9" | 1 3/4" | 1,500 lbs. | 12V/24V | Dull Stainless Steel | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
| For Strike | Output Voltage | Each | |
| HES 9600 | 12-24V DC | 0000000 | 000000 |
Electric Door Strike Plates for Surface Mounted Locks
If your lock latches to a mechanism that's mounted to the door's surface instead of in the door jamb, select this strike plate. It regulates access to doors by holding or releasing a lock's latch with a signal from a push-button switch, keypad control, or card reader. Strike plates must be hardwired.
When replacing an electric strike plate, first select one that will work with your lock type so that the latch will align properly with the plate. Next, choose a strike plate that can accommodate your latch bolt projection (how far the latch bolt extends from the door's edge). Then, match the size of the strike plate to your door frame cutout. If you don't find an exact match, choose a strike plate with a smaller size than your cutout.
For technical drawings and 3-D models, click on a part number.
For Cutout | Voltage | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Latch Bolt Projection | Ht. | Wd. | Dp. | Holding Strength | AC | DC | Finish | For Door Frame Material | For Door Swing Direction | Mounting Hardware Included | Each | |
Trine 00 | ||||||||||||
| 5/8" | 2 1/8" | 1 3/16" | 3 5/16" | 1,000 lbs. | 8V-16V | 4V-6V | Dull Brass | Metal, Wood | Left, Right | Yes | 0000000 | 0000000 |
| For Strike | Output Voltage | Each | |
| Trine 00 | 8-24V DC | 0000000 | 00000 |
Strikes for Deadbolt Cabinet Door and Drawer Locks
This strike fits most deadbolt-style locks. Mount it on the right or left side of a cabinet door or drawer.
For technical drawings and 3-D models, click on a part number.
Overall | Slot | Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Lg. | Wd. | Fasteners Included | Screw Size | Mounting Hole Dia. | For Use On | Each | |
Steel—Dull | ||||||||||
| 4" | 2 13/16" | 1/16" | 3 3/8" | 1/4" | No | No. 6 | 3/16" | Wood | 0000000 | 00000 |