Two-Head Ratcheting Box Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/547/5473a12p1-a07a-digital@halfx_636954508868978280.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/547/5473a11p1-a07a-digital@halfx_636954381796525453.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/546/5461a3p1-a07a-digital@halfx_636954369113484940.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/546/5461a21p1-a07a-digital@halfx_636954442154714963.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/606/6065a15p1-a07a-digital@halfx_636954416797848527.png?ver=imagenotfound)
Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool. Wrenches with 12-point openings are easier to position on hex fasteners than wrenches with 6-point openings but make less contact. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Drive Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Material | Appearance | Specifications Met | Each | |
Inch | ||||||||
---|---|---|---|---|---|---|---|---|
4-Point Openings | ||||||||
3/16", 1/4" × 5/16", 3/8" | 5 1/2" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 000000 |
4-Point and 6-Point Openings | ||||||||
3/16", 1/4" × 1/2", 9/16" | 7" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
6-Point Openings | ||||||||
1/4" × 5/16" | 4 3/8" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
3/8" × 7/16" | 5 1/2" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
1/2" × 9/16" | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
12-Point Openings | ||||||||
1/4" × 5/16" | 4 3/8" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
3/8" × 7/16" | 5 1/2" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1/2" × 9/16" | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
5/8" × 11/16" | 8 1/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
5/8" × 3/4" | 8 1/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
11/16" × 7/8" | 9 1/4" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
3/4" × 7/8" | 9 1/4" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
13/16" × 7/8" | 9 1/4" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
13/16" × 15/16" | 9 1/4" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 000000 | 00000 |
Torx Openings | ||||||||
E6 × E8 | 5 1/8" | 11/16" × 17/64" | 5° | Chrome-Plated Steel | Polished | __ | 0000000 | 00000 |
E10 × E12 | 5 7/8" | 13/16" × 19/64" | 5° | Chrome-Plated Steel | Polished | __ | 0000000 | 00000 |
E14 × E18 | 7 1/2" | 1 1/8" × 25/64" | 5° | Chrome-Plated Steel | Polished | __ | 0000000 | 00000 |
E20 × E24 | 9 1/8" | 1 9/32" × 7/16" | 5° | Chrome-Plated Steel | Polished | __ | 0000000 | 00000 |
Metric | ||||||||
6-Point Openings | ||||||||
7 mm × 8 mm | 4 3/8" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
9 mm × 10 mm | 5 1/2" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
11 mm × 12 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
11 mm × 13 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
12 mm × 14 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
13 mm × 14 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
12-Point Openings | ||||||||
7 mm × 8 mm | 4 3/8" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
9 mm × 10 mm | 5 1/2" | 3/8" × 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
11 mm × 12 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
13 mm × 14 mm | 6 7/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
15 mm × 17 mm | 8 1/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
16 mm × 18 mm | 8 1/8" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
19 mm × 21 mm | 9 1/4" | 1/2" × 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Extended-Reach Ratcheting Box Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/546/5461a41p1-a07a-digital@halfx_636954337566434812.png?ver=imagenotfound)
An extra-long handle provides access to hard-to-reach fasteners and increases leverage. These wrenches have a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. Wrenches are polished for a mirror-like finish.
Drive Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Material | Appearance | Specifications Met | Each | |
12-Point Openings | ||||||||
---|---|---|---|---|---|---|---|---|
1/4" × 5/16" | 8" | 3/8" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 000000 |
3/8" × 7/16" | 10" | 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1/2" × 9/16" | 10" | 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
5/8" × 11/16" | 12" | 1/2" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
3/4" × 7/8" | 14" | 9/16" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1" × 1 1/16" | 15" | 9/16" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1 1/16" × 1 1/8" | 15" | 9/16" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1 1/16" × 1 1/4" | 15" | 9/16" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
1 1/8" × 1 3/16" | 15" | 9/16" | 25° | Chrome-Plated Steel | Polished | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Two-Head Box Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5458a15p1-a07a-digital@halfx_636954487151276670.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5459a28l1-a07a-digital-master1559853524-p9@halfx_636954445517127255.png?ver=imagenotfound)
Dull Chrome Plated | Polished Chrome Plated | ||||||||
---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Head Offset Angle | Head Thick. | Material | Specifications Met | Each | Each | ||
12-Point Openings | |||||||||
5/16" × 3/8" | 8 7/8" | 15° | 9/32" × 21/64" | Steel | __ | 000000 | 00 | 0000000 | 000000 |
7/16" × 1/2" | 10 3/4" | 15° | 23/64" × 3/8" | Steel | __ | 000000 | 00 | 0000000 | 00000 |
1/2" × 9/16" | 11 1/2" | 15° | 3/8" × 13/32" | Steel | __ | 000000 | 00 | 0000000 | 00000 |
9/16" × 5/8" | 12 1/2" | 15° | 13/32" × 15/32" | Steel | __ | 000000 | 00 | 0000000 | 00000 |
11/16" × 3/4" | 14 3/8" | 15° | 1/2" × 17/32" | Steel | __ | 000000 | 00 | 0000000 | 00000 |
3/4" × 7/8" | 15 7/8" | 15° | 17/32" × 37/64" | Steel | __ | 000000 | 00 | 0000000 | 00000 |
15/16" × 1" | 10 1/2" | 15° | 9/16" × 39/64" | Steel | ASME B107.100 | 0000000 | 000000 | 000000 | 00 |
1 1/16" × 1 1/8" | 16 1/4" | 15° | 41/64" × 43/64" | Steel | __ | 0000000 | 00000 | 000000 | 00 |
Nonsparking Box Wrenches
![](/prerenderstable/mvPRE/contents/gfx/imagecache/650/6505a13p1-a07a-digital@halfx_636954430399439425.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5459a28l1-a07a-digital-master1559853524-p9@halfx_636954445517127255.png?ver=imagenotfound)
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Warning: Do not use these tools in direct contact with acetylene.
Drive Size | Overall Lg. | Head Offset Angle | Head Thick. | Material | Specifications Met | Each | |
12-Point Openings | |||||||
---|---|---|---|---|---|---|---|
7/16" × 1/2" | 7 3/4" | 15° | 5/16" × 5/16" | Aluminum-Bronze | FM Approved | 0000000 | 000000 |
1/2" × 9/16" | 9 1/2" | 15° | 7/16" × 1/2" | Aluminum-Bronze | FM Approved | 0000000 | 00000 |
9/16" × 5/8" | 9 1/2" | 15° | 7/16" × 1/2" | Aluminum-Bronze | FM Approved | 0000000 | 00000 |
3/4" × 7/8" | 12 1/4" | 15° | 9/16" × 5/8" | Aluminum-Bronze | FM Approved | 0000000 | 00000 |
15/16" × 1" | 14 3/4" | 15° | 11/16" × 11/16" | Aluminum-Bronze | FM Approved | 0000000 | 000000 |
15/16" × 1 1/16" | 15 1/4" | 15° | 11/16" × 11/16" | Aluminum-Bronze | FM Approved | 0000000 | 000000 |
Ratcheting Box Wrench Sets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/536/5364a13p1-a07a-digital@halfx_636954417770663056.png?ver=imagenotfound)
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. These wrenches are polished for a mirror-like finish.
Sizes Included | Overall Lg. | Turn Required to Ratchet | Material | Container Type | Specifications Met | Each | |
Inch Wrench Sets—6-Point and 12-Point Openings | |||||||
---|---|---|---|---|---|---|---|
3-Piece Sets | |||||||
6-Point: 3/8" × 7/16", 1/2" × 9/16" 12-Point: 5/8" × 11/16" | 4 1/2"-6 7/8" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 000000 |
5-Piece Sets | |||||||
6-Point: 1/4" × 5/16", 3/8" × 7/16", 1/2" × 9/16" 12-Point: 5/8" × 11/16", 3/4" × 7/8" | 4 1/2"-9 1/4" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
6-Piece Sets | |||||||
6-Point: 1/4" × 5/16", 3/8" × 7/16", 1/2" × 9/16" 12-Point: 5/8" × 11/16", 3/4" × 7/8", 13/16" × 15/16" | 4 1/2"-9 1/4" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Inch Wrench Sets—12-Point Openings | |||||||
3-Piece Sets | |||||||
3/8" × 7/16" 1/2" × 9/16" 5/8" × 3/4" | 5 1/2"-8 1/8" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
5-Piece Sets | |||||||
1/4" × 5/16" 3/8" × 7/16" 1/2" × 9/16" 5/8" × 3/4" 11/16" × 7/8" | 4 1/2"-9 1/4" | 25° | Chrome-Plated Steel | Plastic Caddy | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Inch Wrench Sets—Torx Openings | |||||||
4-Piece Sets | |||||||
E6 × E8 E10 × E12 E14 × E18 E20 × E24 | 5 1/8"-9 1/8" | 5° | Chrome-Plated Steel | __ | __ | 0000000 | 000000 |
Metric Wrench Sets—6-Point and 12-Point Openings | |||||||
5-Piece Sets | |||||||
6-Point: 7 mm × 8 mm, 9 mm × 10 mm, 11 mm × 13 mm, 12 mm × 14 mm 12-Point: 15 mm × 17 mm | 4 1/2"-8 1/8" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Metric Wrench Sets—12-Point Openings | |||||||
3-Piece Sets | |||||||
9 mm × 10 mm 13 mm × 14 mm 15 mm × 17 mm | 5 1/2"-8 1/8" | 25° | Chrome-Plated Steel | Plastic Pouch | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
5-Piece Sets | |||||||
7 mm × 8 mm 9 mm × 10 mm 11 mm × 12 mm 13 mm × 14 mm 15 mm × 17 mm | 4 1/2"-9 1/4" | 25° | Chrome-Plated Steel | Plastic Caddy | Fed. Spec. GGG-W-001405 | 0000000 | 00000 |
Deep-Offset Ratcheting Box Wrench Sets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/535/5359a81p1-a07a-digital@halfx_636954407683683142.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5459a28l1-a07a-digital-master1559853524-p9@halfx_636954445517127255.png?ver=imagenotfound)
The heads are offset to provide clearance for reaching over obstructions. These wrenches have a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning the tool. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. They are polished for a mirror-like finish.
Sizes Included | Overall Lg. | Head Offset Angle | Turn Required to Ratchet | Material | Drive Size - 2 | Drive Size | Each | |
Inch Wrench Sets—12-Point Openings | ||||||||
---|---|---|---|---|---|---|---|---|
5-Piece Sets | ||||||||
1/4" × 5/16" 3/8" × 7/16" 1/2" × 9/16" 5/8" × 3/4" 11/16" × 7/8" | 4 1/4"-9 1/8" | 25° | 25° | Chrome-Plated Steel | 5/16", 7/16", 9/16", 3/4", 7/8" | 1/4", 3/8", 1/2", 5/8", 11/16" | 0000000 | 000000 |
Box Wrench Sets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5458a72p1-a07a-digital@halfx_636954436503413378.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/545/5459a28l1-a07a-digital-master1559853524-p9@halfx_636954445517127255.png?ver=imagenotfound)
These wrenches are polished for a mirror-like finish.
Sizes Included | Overall Lg. | Head Offset Angle | Material | Appearance | Container Type | Specifications Met | Each | |
12-Point Openings | ||||||||
---|---|---|---|---|---|---|---|---|
7-Piece Sets | ||||||||
5/16" × 3/8" 7/16" × 1/2" 9/16" × 5/8" 11/16" × 3/4" 13/16" × 7/8" 15/16" × 1" 1 1/16" × 1 1/8" | 7"-16 1/4" | 15° | Chrome-Plated Steel | Dull | Pouch | ASME B107.100 | 0000000 | 0000000 |
Box-End Tight-Clearance Offset Sockets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/550/55015a24c1-a07a-digital-master1559853565-p9@halfx_636954393585300051.png?ver=imagenotfound)
Make maximum contact on all sides of a fastener to reduce slipping. Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that regular sockets can't reach. They are also known as torque adapters.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
3/8" Square Drive | ||||||
---|---|---|---|---|---|---|
3/8" | 2 11/16" | 17/64" | 2" | Chrome-Plated Steel | 00000000 | 000000 |
7/16" | 2 3/4" | 19/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
1/2" | 2 13/16" | 21/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
9/16" | 2 7/8" | 23/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
5/8" | 2 7/8" | 25/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
11/16" | 2 15/16" | 27/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
3/4" | 3" | 29/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
7/8" | 3 1/16" | 33/64" | 2" | Chrome-Plated Steel | 00000000 | 00000 |
Box-End Tight-Clearance Offset Socket Sets
![](/prerenderstable/mvPRE/contents/gfx/imagecache/550/55015a35p2-a07a-digital@halfx_636954408344956666.png?ver=imagenotfound)
Make maximum contact on all sides of a hex fastener to reduce slipping. Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that regular sockets can't reach. They are also known as torque adapters.
No. of Pieces | Includes | Material | Each | |
3/8" Square Drive | ||||
---|---|---|---|---|
9 | Offset Sockets: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | Chrome-Plated Steel | 00000000 | 0000000 |