Add a photo in the self-laminating square to identify the employee working a job. Write on these tags using a permanent marker and then seal the laminating flap to protect the text from smudging and wear. Use these tags to remind workers to use lockout devices and procedures to prevent unexpected machine startups during maintenance and repair work. They have danger headers that are typically used in extreme situations to indicate an imminently dangerous situation that, if not avoided, will result in death or serious injury. These tags help meet OSHA standards for lockout/tagout applications. Attach them with an included cable tie.

Communicate dangers to workers near equipment that could cause injury. Tags have printing on one side. Write on them using a permanent marker. All tags meet OSHA safety color standards for indicating hazards.

Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

Tags are laminated in plastic so they hold up outdoors. Use them to communicate dangers to workers near equipment that could cause injury. Write on them using a permanent marker. All tags meet OSHA safety color standards for indicating hazards. Attach them with an included cable tie.

Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

Write your message using a permanent marker and then seal the laminating flap to protect the text from smudging and wear. Use these tags to communicate an imminently dangerous situation near machinery and equipment that, if not avoided, will result in death or serious injury. All tags meet OSHA safety color standards for indicating hazards. Attach them with an included string tie.

Identify hazards at a glance with the headers and illustrations on these labels. They meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards.

Danger headers are used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.

Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

Labels that meet ANSI Z535 adhere to standards for identifying a hazard and describing how to avoid it.

Communicate dangers to workers near equipment that could cause injury. About the size of an index card, these labels have an adhesive backing, so you can peel and stick them onto machinery, walls, and anywhere else they’re needed.

Labels with danger, warning, and caution headers meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards that could harm workers. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Warning headers indicate a moderately hazardous situation that, if not avoided, may result in death or serious injury.

Wrap these labels around padlocks to comply with lockout/tagout procedures. All labels have space for an employee’s name and department.

Labels with a cover protect against moisture and smudging.

Danger—Do Not Operate, Danger—Do Not Remove This Lock, Danger—Verrouillee, and Peligro—Equipo Bloqueado labels have headers and safety colors that meet OSHA standards for indicating hazards. Use them in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.

Communicate dangers to workers near moving equipment that could cause injury.

Signs with a header meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

For technical drawings and 3-D models, click on a part number.

The illustrations on these signs help workers identify hazards at a glance. Use them to communicate an imminently dangerous situation that, if not avoided, will result in death or serious injury. All signs meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards.

Cover a steering wheel to communicate when equipment is out of service. Use a cable tie (not included) to secure in place. These covers meet OSHA safety color standards for indicating hazards.

Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.

Each lockout rotates into itself, making installation in tight spaces easier than other lockouts. All prevent valve handles from turning and include write-on labels. They help you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers.

For technical drawings and 3-D models, click on a part number.

When your valve has a small handle or no handle to secure a lockout onto, these compact lockouts prevent accidental turns. They make sure your line doesn’t start up and cause injuries while repairs are happening downstream. These lockouts help you comply with OSHA 29 CFR 1910.147 requirements for the control of hazardous energy.

Cover lockouts twist on and off your valve easily. They consist of a bottom disc that fits around the base of your valve stem and a cover that attaches to the disc. Secure the cover to the disc using a padlock (not included). Attach the disc to your stem by tightening the included clamp with a screwdriver. The disc doesn’t interfere with valve operation until the cover is on, so these lockouts are a great choice for valves that need to be frequently closed and locked out. They’re also good for lines that you lock in the open position to prevent tampering, such as fire extinguishing water lines.

Lockouts come in different colors for easy identification and to help meet OSHA standards. The label is permanently attached to record employee name and department. Use these lockouts to lock out a single energy control on machinery and electrical equipment so it can't be used.

For technical drawings and 3-D models, click on a part number.

Same as our other low-profile lockout hasps, but with an attached label to record employee name and department. Use this lockout hasp to lock out a single energy control on machinery and electrical equipment so it can't be used. It helps you comply with OSHA 29 CFR 1910.147 procedures for the control of energy sources that could injure workers. Hasps that meet OSHA 29 CFR 1910.145 adhere to safety color standards for indicating hazards.

For technical drawings and 3-D models, click on a part number.

A Danger label on these hasps alerts passersby that an energy control is locked out. Use them to make sure machinery doesn’t get powered up during repairs. They have multiple holes for multiple padlocks and tags—mark them with names or maintenance tasks and remove them individually as work is completed. Until the last padlock is removed, these hasps won’t open. They help you comply with OSHA 29 CFR 1910.147 requirements for the control of hazardous energy.

Steel hasps are stronger than aluminum hasps. Aluminum hasps resist corrosion better than steel hasps.

Style A have a stop sign design. Write on them with a dry erase marker so they can be reused without changing the label. Style B have a warning label on the front and space for 6 names and dates on the back.

Prohibit access to the main valve on a gas cylinder. These lockouts secure with a padlock and lockout tag. They help you comply with OSHA 29 CFR 1910.147, which requires handles on pneumatic and hydraulic systems to be locked out during maintenance to prevent injuries.

Plastic lockouts are more corrosion resistant and lighter in weight than steel lockouts. However, they aren’t as strong. These lockouts have a warning label to alert passersby. Style A are for forklift gas cylinder handwheels. With holes for up to three padlocks, each person can add their own as they start a job. Each padlock adds another layer of security, and until the last is removed, these lockouts won’t open. Made of 100% recycled materials, they meet UL 2809-2 purchasing requirements for LEED-certified facilities.

For technical drawings and 3-D models, click on a part number.

Lock out a plug that powers machinery so no one starts it up during maintenance. Place a plug into the cylinder of these lockouts and secure with a padlock. All can fit a standard electrical plug that has a single cord. Made of plastic, they resist corrosion and are nonconductive for use with electronics. These lockouts help you comply with OSHA 29 CFR 1910.147, which requires electrical circuits to be locked out to prevent injury.

Lockouts for 2 or more padlocks let multiple people add their own padlock. This keeps everyone safe until all of the maintenance work is done and all padlocks are removed.

Lockouts with 2 holes for electrical plugs let you insert a cord from either end. That means you can lock out two devices at once, or lock out both the plug and socket of the same cord.

Lockouts with 5 holes for electrical plugs have a variety of hole sizes to handle different cord diameters. They’ll fit dual-cord battery plugs for forklifts, as well as standard single-cord plugs. Use them with gas-powered equipment, too—the largest hole on these lockouts fits a gas cylinder valve.

Lockouts with a message alert passersby that a plug has been locked out for safety.

Lockouts that meet UL 2809-2 are made of 100% recycled materials and are sustainably sourced to meet ongoing purchasing requirements for LEED-certified facilities.

Tighten these cables hassle-free—unlike pinch-point cables, you can pull them tighter even after they’re locked out. They won’t loosen until you remove all your padlocks and open them up. Weave them through and around equipment such as panel boxes, flanges, and multiple gate valves. All are coated in plastic so they don’t scuff up surfaces. They have multiple holes for multiple padlocks, so each person can add their own as they start a job. The holes are large enough to fit lockout hasps, so you can add more padlocks for larger groups. These cables help you comply with OSHA 29 CFR 1910.147 safety procedures.

Style B have a warning label on one side to alert passersby to the maintenance. On the other side, they have a reusable write-on label for recording your name and department.

Steel and stainless steel cables are more durable than nylon cables.