Install these switches in a panel cutout. Small enough to fit in tight spaces, they handle comparable electrical loads to standard sized switches. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All have a lockout so you can secure them in the off position with a padlock (not included). They’re rated IP65 for protection from washdowns.

For technical drawings and 3-D models, click on a part number.

Small yet mighty, these switches are about as tall and wide as an index card yet durable enough to mount directly to a wall. Their polycarbonate housing protects the switch and resists denting, chipping, and cracking. Rated IP65, the housing also seals out water even in frequently washed down areas. Don’t be fooled by their size—these switches can handle electrical loads comparable to a standard sized switch.

These switches cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All have a lockout, so you can secure them in the off position with a padlock (not included).

For technical drawings and 3-D models, click on a part number.

Install these switches in a panel cutout. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All are UL listed, C-UL listed, and CE marked—they meet American, Canadian, and European safety standards.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.

Terminal covers prevent contact with live terminals.

For technical drawings and 3-D models, click on a part number.

Rated IP69K, these switches withstand high-pressure, high-temperature washdowns. They cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. All have a lockout so you can secure them in the off position with a padlock (not included).

For technical drawings and 3-D models, click on a part number.

The IP66 rated housing not only shields these switches from washdowns but also makes them durable enough to be mounted outside of an electrical panel. These switches cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.

For technical drawings and 3-D models, click on a part number.

Cut power and keep it isolated to prevent equipment from starting up during inspection and maintenance. These switches are housed in a protective enclosure that resists denting, chipping, and cracking. Mount them to the wall when you run out of space in an electrical panel.

Switches with lockout secure in the off position with a padlock with a maximum shackle diameter of 5/16” (not included).

Add auxiliary contact blocks to send a signal or connect to another device, such as an alarm or indicating light.

Use additional power poles to control more than three circuits. Add neutral poles to open and close the neutral leg of a three phase system.

For technical drawings and 3-D models, click on a part number.

With a housing that’s designed to contain an explosion, these switches are safe to use in areas where ignitable concentrations of flammable or combustible gas, dust, or fibers may be present. They meet NEC Class I Div. 1 and 2, Groups B, C, D, and Class II, Div. 1 and 2, Groups E, F, and G. Use them to cut power and keep it isolated, so equipment won’t accidentally start up during inspection or maintenance.

Made from aluminum, these switches also resist corrosion in wet or oily areas. They have a lockout, so you can secure them in the off position with a padlock (not included).

For technical drawings and 3-D models, click on a part number.