We will reply to your message within an hour.
Built into a terminal block, these switches mount to DIN rail.
Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.
Mount these switches to a flat surface or attach to DIN rail.
Safely transmit power to switches and sensors in highly volatile areas. Commonly used in refineries, power plants, and wastewater-treatment facilities, these barriers use a NAMUR signal to reduce the current and voltage coming from your power supply—preventing sparks and ignition.
Actuate your switch with precision—these proximity switches have an easy-to-read screen for precise distance inputs, measurements, and troubleshooting.
Often used in electrical enclosures, these switches mount directly to DIN rails. They cut power and keep it isolated to stop equipment from starting up during inspection and maintenance.
Install these switches inside an enclosure to prevent it from opening when power is on—turn the switch to disconnect power and release the door.
Keep power running while you access your enclosure. Unlike standard enclosure disconnect switches, which shut off power as you open your enclosure, these have an override function.
Designed to mount on an electrical enclosure, these switches control motors, lighting, and electric heat circuits.
Mount these Ethernet switches to DIN rail to bring connections closer to where you need them.
Link industrial equipment with multiple computers to expand your data network.
Switch heaters on or off when your process reaches a certain temperature. Both these controllers and your heater will be powered by the same wall outlet.
Mount these temperature controllers directly onto DIN rail for controlling systems with rapid, unpredictable, or complex temperature changes. They turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control.
The faceplate on these controllers is sealed to meet NEMA 4X and IP66 for protection in washdown environments with splashing water, corrosive liquid, and dust.
Ideal in systems with rapid, unpredictable, or complex temperature changes, these controllers turn heating equipment on and off using a proportional-integral-derivative (PID) control algorithm to make fine adjustments, giving you the most precise and stable temperature control.
To protect equipment and personnel, these controllers shut down your machine when it gets too hot.
Cycle heaters on and off intermittently to maintain a set temperature in your system.