Isolate input and output circuits to prevent damage from voltage spikes, reduce signal interference, and amplify signal.

With no moving parts, these solid state relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, which protects components from voltage spikes, amplifies the relay’s signal, and reduces interference for reliable transmission.

Fit these relays where standard spade-terminal relays are too big.

Using a low-current signal, these relays are often used to control small motors and heaters.

The circular pin terminals plug into relay sockets for easy installation.

With no moving parts, these solid-state relays are fast switching and require less maintenance, last longer, and are quieter than mechanical switches.

A single, momentary input voltage switches these relays and locks them in position, so they don't require a constant input voltage to stay on or off.

Operate equipment that cycles on and off from your control cabinet.

Receive signals from safety monitoring relays or controllers to switch devices off and on because of a system failure.

The interlocked opposing contacts won't close at the same time, so these relays are suitable for safety applications such as machine guarding.

With no moving parts, these solid state relays require less maintenance and last longer, switch faster, and are quieter, than mechanical relays. Also known as automotive relays.

An extended housing shields the terminals on these relays from weather.

Often used to regulate the speed of AC fans or keep a heater at a set temperature, these relays connect directly to sensors to calculate and adjust output power. This allows you to use an analog input without converting it to a digital signal to control output power.

Prevent changes in frequency from damaging sensitive equipment.

Protect electrical equipment from overcurrent and undercurrent damage—these relays continuously monitor current flow.

Detect and mitigate ground faults to prevent harm to equipment, circuits, and people.

Turn machinery, such as paint and conveyor lines, on and off after a set period of time.

Control two steps of an electrical process from a single relay—with two fully independent channels and 30 different functions, these relays give you a wide range of possibilities.

Considered solid state because they don’t have any moving parts, these timer relays last longer, switch faster, and are quieter than mechanical relays. They interface between your controller and components to isolate input and output circuits, preventing damage to your components from voltage spikes, amplifying the relay's signal, and reducing signal interference. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Install these relays in a panel cutout or plug them into a relay socket. Unlike mechanical relays, these solid state relays have no moving parts, so they require less maintenance and last longer, are quieter, and switch faster.

Protect components from voltage spikes while amplifying the relay’s signal and reducing interference for reliable transmission—these relays interface between your controller and system components to isolate the input and output circuits. They have multiple timing functions, so you don’t need to swap out your relay if you want to change their function.

Reduce voltage fluctuations and stress on shafts and bearings when starting up three-phase motors. These timer relays start with motor contacts in a star configuration, then switch to a delta configuration after a set delay.

Mount these monitors to DIN rail.

Smaller than other PLCs, these controllers save space in your control cabinet. They combine the functionality of a relay, timer relay, and switch in one unit, so you can program simple automation jobs.