DIN 980V Nuts | McMaster-Carr

Filter by

Specifications Met

System of Measurement

Thread Size

Locking Type

Nut Type

Thread Pitch

Fastener Strength Grade/Class

Height

Finish

Material

Hex Nut Profile

Width

Distorted Thread Type

Thread Direction

Thread Spacing

Thread Type

Drive Style

Fastener Strength Rating

Performance

Sold As

DFARS Compliance

REACH Compliance

RoHS Compliance

Forward

How can we improve?

23 Products

Top-Lock Distorted-Thread Locknuts

Irregularly shaped threads at the top of these locknuts grip the screw for a stronger hold than nylon-insert locknuts. Although the threads prevent the nut from backing out due to vibration, they also increase the effort to install and remove. To get these nuts off, you may need special tools, such as an impact wrench or propane torch. Nuts are not reusable.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Zinc-Yellow-Chromate-Plated Steel—With a more durable finish than clear zinc plating, these nuts are suitable for most wet and outdoor environments. However, they won't hold up to the harsh chemicals that stainless steel can.

Zinc-Plated Steel—A step up from plain steel, the zinc plating withstands occasional exposure to moisture.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Yellow-Chromate-Plated Steel


	M36 × 4 mm	55	36	ISO Class 8	DIN 980V	1	000000000	00000

	Zinc-Plated Steel


			M3 × 0.5 mm	5.5	3.7	ISO Class 8	DIN 980V	50	000000000	00000
			M4 × 0.7 mm	7	4.2	ISO Class 8	DIN 980V	100	000000000	00000
			M5 × 0.8 mm	8	5.1	ISO Class 8	DIN 980V	100	000000000	00000
			M6 × 1 mm	10	6	ISO Class 8	DIN 980V	100	000000000	0000
			M8 × 1.25 mm	13	8	ISO Class 8	DIN 980V	50	000000000	0000
			M10 × 1.25 mm	17	10	ISO Class 8	DIN 980V	25	000000000	0000
			M10 × 1.5 mm	17	10	ISO Class 8	DIN 980V	25	000000000	0000
			M12 × 1.25 mm	19	12	ISO Class 8	DIN 980V	25	000000000	00000
			M12 × 1.5 mm	19	12	ISO Class 8	DIN 980V	10	000000000	00000
			M12 × 1.75 mm	19	12	ISO Class 8	DIN 980V	25	000000000	00000
			M14 × 1.5 mm	22	14	ISO Class 8	DIN 980V	10	000000000	00000
			M14 × 2 mm	22	14	ISO Class 8	DIN 980V	10	000000000	00000
			M16 × 1.5 mm	24	16	ISO Class 8	DIN 980V	5	000000000	00000
			M16 × 2 mm	24	16	ISO Class 8	DIN 980V	10	000000000	00000
			M18 × 1.5 mm	27	18	ISO Class 8	DIN 980V	1	000000000	0000
			M18 × 2.5 mm	27	18	ISO Class 8	DIN 980V	5	000000000	00000
			M20 × 1.5 mm	30	20	ISO Class 8	DIN 980V	1	000000000	0000
			M20 × 2.5 mm	30	20	ISO Class 8	DIN 980V	5	000000000	00000
			M24 × 1.5 mm	36	24	ISO Class 8	DIN 980V	1	000000000	0000
			M24 × 3 mm	36	24	ISO Class 8	DIN 980V	1	000000000	0000
			M27 × 3 mm	41	27	ISO Class 8	DIN 980V	1	000000000	0000
			M30 × 3.5 mm	46	30	ISO Class 8	DIN 980V	1	000000000	0000