DIN 84 Machine Screws | McMaster-Carr

Filter by

Specifications Met

System of Measurement

Thread Size

Length

Drive Style

Rounded Head Style

Head Diameter

Material

Fastener Head Type

Head Height

Threading

Thread Pitch

Tip Type

Finish

Thread Type

Thread Spacing

Rounded Head Profile

Thread Direction

DFARS Specialty Metals

REACH

RoHS

Thread Fit

Tensile Strength

Forward

How can we improve?

237 Products

About Rounded Head Screws

Flat Tip

More corrosion resistant than steel, and almost as strong, these 18-8 stainless steel screws have a narrower head than pan head screws to fit into tight spaces. They’re often used in electrical panels and next to flanges and raised surfaces in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. A deep slot gives you more driving power and keeps the screwdriver from slipping. Length is measured from under the head.

Passivated screws are finished with an extra layer of rust protection.

ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.

For technical drawings and 3-D models, click on a part number.

Flat Tip—18-8 Stainless Steel
Lg., mm	Threading	Head Dia., mm	Head Ht., mm	Finish	Tensile Strength, psi	Specifications Met	Pkg. Qty.		Pkg.
M1 × 0.25 mm
2	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	00000
3	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	00000
4	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	00000
5	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
6	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
8	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
10	Fully Threaded	2.00	0.70	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
M1.2 × 0.25 mm
2	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
3	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
4	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
5	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
6	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
8	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
10	Fully Threaded	2.30	0.80	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
M1.4 × 0.3 mm
2	Fully Threaded	2.60	0.90	__	70,000	DIN 84, ISO 1207	5	000000000	00000
3	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
4	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
5	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
6	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
8	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
10	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
12	Fully Threaded	2.60	0.90	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
M1.6 × 0.35 mm
2	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	5	000000000	0000
3	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
4	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
5	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
6	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
8	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
10	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
12	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
16	Fully Threaded	3.00	1.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
M2 × 0.4 mm
3	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
4	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
5	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
6	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
14	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
16	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
20	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
25	Fully Threaded	3.80	1.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
M2.5 × 0.45 mm
3	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
4	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
5	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
12	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
14	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
16	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
20	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
25	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
30	Fully Threaded	4.50	1.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
M3 × 0.5 mm
4	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
5	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
6	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
12	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
14	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
16	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
20	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
25	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
30	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
35	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
40	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
45	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
50	Fully Threaded	5.50	2.00	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
M3.5 × 0.6 mm
6	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
16	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
20	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
25	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
40	Fully Threaded	6.00	2.40	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
M4 × 0.7 mm
4	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
5	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
6	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
8	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
14	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
16	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	100	000000000	00000
18	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
20	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
25	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
30	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
35	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
40	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
45	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
50	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
60	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
70	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
80	Fully Threaded	7.00	2.60	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
M5 × 0.8 mm
6	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
8	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
10	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
12	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	0000
14	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
16	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
18	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
20	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
25	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
30	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
35	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
40	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
45	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
50	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
60	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
70	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
80	Fully Threaded	8.50	3.30	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
M6 × 1 mm
8	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
10	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
12	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
16	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
20	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
25	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	50	000000000	00000
30	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	25	000000000	0000
35	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
40	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
45	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	25	000000000	00000
50	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
60	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
70	Fully Threaded	10.00	3.90	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
M8 × 1.25 mm
12	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
16	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
20	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
25	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	0000
30	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	10	000000000	00000
40	Fully Threaded	13.00	5.00	Passivated	70,000	DIN 84, ISO 1207	5	000000000	00000

316 Stainless Steel Narrow Cheese Head Slotted Screws

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water. Their narrow head allows them to fit in tight spaces and a deep drive lets you maximize driving power. All are passivated for added protection against oxidation and corrosion. Screws may be mildly magnetic. Length is measured from under the head.

For technical drawings and 3-D models, click on a part number.

316 Stainless Steel
Lg., mm	Threading	Head Dia., mm	Head Ht., mm	Tensile Strength, psi	Specifications Met	Pkg. Qty.		Pkg.
M1.6 × 0.35 mm
3	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	000000
4	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
5	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
6	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
8	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
10	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
12	Fully Threaded	3.00	1.00	100,000	DIN 84	50	000000000	00000
M2 × 0.4 mm
3	Fully Threaded	3.80	1.30	100,000	DIN 84	100	000000000	00000
4	Fully Threaded	3.80	1.30	100,000	DIN 84, ISO 1207	100	000000000	00000
5	Fully Threaded	3.80	1.30	100,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	3.80	1.30	100,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	3.80	1.30	100,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	3.80	1.30	100,000	DIN 84, ISO 1207	100	000000000	00000
M2.5 × 0.45 mm
4	Fully Threaded	4.50	1.60	100,000	DIN 84	100	000000000	00000
5	Fully Threaded	4.50	1.60	100,000	DIN 84	100	000000000	00000
6	Fully Threaded	4.50	1.60	100,000	DIN 84	100	000000000	00000
8	Fully Threaded	4.50	1.60	100,000	DIN 84	100	000000000	00000
10	Fully Threaded	4.50	1.60	100,000	DIN 84	100	000000000	00000
M3 × 0.5 mm
5	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	100	000000000	00000
6	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	50	000000000	00000
8	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	100	000000000	00000
12	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	50	000000000	0000
20	Fully Threaded	5.50	2.00	100,000	DIN 84, ISO 1207	50	000000000	00000
M3.5 × 0.6 mm
5	Fully Threaded	6.00	2.40	100,000	DIN 84, ISO 1207	25	000000000	0000
6	Fully Threaded	6.00	2.40	100,000	DIN 84, ISO 1207	25	000000000	0000
8	Fully Threaded	6.00	2.40	100,000	DIN 84, ISO 1207	25	000000000	0000
10	Fully Threaded	6.00	2.40	100,000	DIN 84, ISO 1207	25	000000000	0000
M4 × 0.7 mm
5	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	25	000000000	0000
6	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	50	000000000	00000
8	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	50	000000000	00000
10	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	50	000000000	0000
12	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	50	000000000	00000
16	Fully Threaded	7.00	2.60	100,000	DIN 84, ISO 1207	25	000000000	0000
M5 × 0.8 mm
8	Fully Threaded	8.50	3.30	100,000	DIN 84, ISO 1207	25	000000000	0000
10	Fully Threaded	8.50	3.30	100,000	DIN 84, ISO 1207	25	000000000	0000
12	Fully Threaded	8.50	3.30	100,000	DIN 84, ISO 1207	25	000000000	00000
16	Fully Threaded	8.50	3.30	100,000	DIN 84, ISO 1207	25	000000000	00000
20	Fully Threaded	8.50	3.30	100,000	DIN 84	25	000000000	00000
30	Fully Threaded	8.50	3.30	100,000	DIN 84, ISO 1207	25	000000000	00000
M6 × 1 mm
8	Fully Threaded	10.00	3.90	100,000	DIN 84, ISO 1207	10	000000000	0000
10	Fully Threaded	10.00	3.90	100,000	DIN 84, ISO 1207	25	000000000	00000
12	Fully Threaded	10.00	3.90	100,000	DIN 84, ISO 1207	10	000000000	0000
16	Fully Threaded	10.00	3.90	100,000	DIN 84, ISO 1207	10	000000000	0000
20	Fully Threaded	10.00	3.90	100,000	DIN 84	25	000000000	00000
25	Fully Threaded	10.00	3.90	100,000	DIN 84	25	000000000	00000

Steel Narrow Cheese Head Slotted Screws

With a narrower head than pan head screws, these cheese head screws fit in tight spaces, such as in electrical panels and next to flanges and raised surfaces. A deep slot gives you more driving power and less of a chance of the screwdriver slipping. Length is measured from under the head.

When choosing your finish, consider your environment. Zinc-plated screws have a layer of zinc that protects the steel from rust in wet environments and extends the life of the screw. Don’t use them around salt water and chemicals.

ISO 1207 (formerly DIN 84), DIN 920, and DIN 922 screws meet international standards for fastener dimensions.

For technical drawings and 3-D models, click on a part number.

Flat Tip

Zinc-Plated Steel
Lg., mm	Threading	Head Dia., mm	Head Ht., mm	Tensile Strength, psi	Specifications Met	Pkg. Qty.		Pkg.
M1.6 × 0.35 mm
2	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	00000
3	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	0000
4	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	0000
5	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	0000
6	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	0000
8	Fully Threaded	3.0	1.0	60,000	DIN 84, ISO 1207	10	000000000	0000
M2 × 0.4 mm
3	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
4	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
5	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	3.8	1.3	60,000	DIN 84, ISO 1207	100	000000000	0000
M2.5 × 0.45 mm
3	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	50	000000000	00000
4	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	50	000000000	0000
5	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	4.5	1.6	60,000	DIN 84, ISO 1207	100	000000000	0000
M3 × 0.5 mm
4	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
5	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
16	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
20	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
25	Fully Threaded	5.5	2.0	60,000	DIN 84, ISO 1207	100	000000000	0000
M4 × 0.7 mm
5	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
6	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
10	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
12	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
16	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
20	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
25	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
30	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
35	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	100	000000000	0000
40	Fully Threaded	7.0	2.6	60,000	DIN 84, ISO 1207	50	000000000	00000
M5 × 0.8 mm
6	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	0000
8	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
12	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
16	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
20	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
25	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
30	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	100	000000000	00000
35	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	50	000000000	0000
40	Fully Threaded	8.5	3.3	60,000	DIN 84, ISO 1207	25	000000000	0000
M6 × 1 mm
8	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	100	000000000	00000
10	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	100	000000000	00000
12	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	100	000000000	00000
16	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	50	000000000	0000
20	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	50	000000000	0000
25	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	50	000000000	00000
30	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	25	000000000	0000
35	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	25	000000000	0000
40	Fully Threaded	10.0	3.9	60,000	DIN 84, ISO 1207	25	000000000	0000

Email Us

About Rounded Head Screws

18-8 Stainless Steel Narrow Cheese Head Slotted Screws

316 Stainless Steel Narrow Cheese Head Slotted Screws

Steel Narrow Cheese Head Slotted Screws