DIN 7979D-m6 Dowel Pins | McMaster-Carr

Filter by

Specifications Met

System of Measurement

Diameter

Length

Fastener Head Type

Thread Size

Shaft Type

End Shape

Material

Thread Pitch

Pin Type

End Type

Minimum Hardness

Tolerance Rating

Performance

Double Shear Breaking Strength

USMCA Qualifying

RoHS Compliance

DFARS Compliance

REACH Compliance

Steel Grade

For Use With

Forward

How can we improve?

90 Products

Pull-Out Dowel Pins

Remove pins even when you only have access to one end or they sit flush with the surface of your part. With one internally threaded end, they are easier to remove than most dowel pins. Thread a screw into the pin and then pull with the removal tool (sold separately). You can also pull the screw with pliers, but there’s more risk of damaging the hole.

Steel

High-Strength Alloy Steel—Our strongest, most wear-resistant pins, these won't bend or break from vibration. Use them for high-stress applications, such as mounting and aligning hydraulic cylinders and injection molds. They perform best in dry environments since moisture will cause them to rust.

Spring Steel—These pins won't deform from stress and vibration. They're stronger than stainless steel but not quite as strong as alloy steel. Pins perform best in dry environments since moisture will cause them to rust.

Puller Handle—A complete removal tool requires a puller handle and a tip that fits your pin diameter. To use, thread a tip into the puller handle and then place the tip over the screw in your pin. Slide the weight along the handle to pull the pin out.

	Lg., mm	Dia. Tolerance, mm	Thread Size	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met		Each
High-Strength Alloy Steel





				16 mm Diameter
				32	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	00000
				36	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
				40	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
				50	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
				60	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
				70	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000



						20 mm Diameter
						50	0.008 to 0.021	M10 × 1.5 mm	51,500	Rockwell C52	DIN 7979D-m6	000000000	0000
						60	0.008 to 0.021	M10 × 1.5 mm	51,500	Rockwell C52	DIN 7979D-m6	000000000	00000
						80	0.008 to 0.021	M10 × 1.5 mm	51,500	Rockwell C52	DIN 7979D-m6	000000000	00000

						Spring Steel





										6 mm Diameter
										16	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										18	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										20	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										24	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										28	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										30	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										32	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										36	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										40	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										50	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
										60	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000



												8 mm Diameter
												20	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												24	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												28	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												30	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												32	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												36	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												40	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												50	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												60	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												70	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
												80	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000



														10 mm Diameter
														24	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														28	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														30	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														32	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														36	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														40	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
														50	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
60														0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
70	0.006 to 0.015													M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
80	0.006 to 0.015													M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000



		12 mm Diameter
		24	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
		30	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
		36	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
		45	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
		50	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
		60	0.007 to 0.018											M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000

Vented Pull-Out Dowel Pins

Insert and remove from blind holes with less effort than pins that aren't vented. The vent relieves trapped air, so pressure doesn't create resistance as you install the pin. Because they have a tapped end, you can thread in a screw and pull the pin out with a removal tool (sold separately). You can also pull using pliers, but there’s more risk of damaging the hole.

Flat Shaft

The flat side of these pins creates a vent that's less likely to be blocked than a spiral shaft, but doesn’t offer quite as strong of a hold.

	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met		Each
High-Strength Alloy Steel





	16 mm Diameter
	32	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	00000
	40	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
	50	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
	60	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
	70	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000
	80	0.007 to 0.018	M8 × 1.25 mm	33,500	Rockwell C52	DIN 7979D-m6	000000000	0000

	Spring Steel





					6 mm Diameter
					16	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					18	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					20	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					24	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					28	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					30	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					36	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					40	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000
					50	0.004 to 0.012	M4 × 0.7 mm	6,600	Rockwell C52	DIN 7979D-m6	000000000	0000



							8 mm Diameter
							20	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							24	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							28	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							30	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							36	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							40	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							50	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							60	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000
							70	0.006 to 0.015	M5 × 0.8 mm	10,400	Rockwell C52	DIN 7979D-m6	000000000	0000



									10 mm Diameter
									24	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									28	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									30	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									36	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									40	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									50	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									60	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000
									70	0.006 to 0.015	M6 × 1 mm	Not Rated	Rockwell C52	DIN 7979D-m6	000000000	0000



											12 mm Diameter
											24	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
											30	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
											36	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
											40	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
											45	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
											50	0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000
60											0.007 to 0.018	M6 × 1 mm	24,000	Rockwell C52	DIN 7979D-m6	000000000	0000