Diesel Fuel Impeller Pumps

Filter by

For Use With

Discharge Pipe Size

Intake Pipe Size

Voltage

Maximum Flow Rate

Electrical Phase

Housing Material

Power Source

Discharge Connection

Intake Connection

Impeller Material

Frequency

Flow Rate @ 10 Feet of Head

Maximum Temperature

Maximum Feet of Head

Priming Type

REACH Compliance

RoHS Compliance

DFARS Compliance

Maximum Pressure

Power

Intake Gender

Overall Length

Forward

How can we improve?

46 Products

How to Prime Your Pump

How to Determine Feet of Head

About Process Pumps

These pumps have the best chemical resistance of all our circulation pumps. Instead of a shaft seal, they use magnets to turn the impeller, reducing wear and leakage. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

Pumps
	Flow Rate, gpm										Pipe Size		Overall					Maintenance Kits		Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 50 ft. of Head	@ 60 ft. of Head	Max. ft. of Head	Max. Viscosity, cP	hp	Current, A	Intake (Gender)	Discharge (Gender)	Lg.	Wd.	Ht.		Each		Each		Each
120V AC, 240V AC, Single Phase—Without Thermal Overload Protection
Hardwire
23	__	20	10	__	__	__	35	__	1/4	2.07/4.14	1 (Female)	1 (Female)	14 3/8"	5 1/8"	7 7/8"	0000000	000000000	00000000	000000	00000000	0000000
26	__	26	12	__	__	__	35	__	1/3	3.24/6.84	1 (Female)	1 (Female)	16 5/16"	6 1/8"	8 3/16"	0000000	00000000	00000000	00000	00000000	000000
240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
57	57	53	30	25	__	__	45	__	1/2	1.1/2.2	1 1/2 (Female)	1 1/2 (Female)	18 3/8"	8 7/8"	11 5/16"	0000000	00000000	00000000	00000	00000000	000000
90	90	84	74	61	49	__	70	__	1	1.5/3	1 1/2 (Female)	1 1/2 (Female)	18 7/8"	6 5/16"	10 1/8"	0000000	00000000	00000000	00000	00000000	000000
120V AC, 208–240V AC, Single Phase—With Thermal Overload Protection
Hardwire
38	36	32	27	21	__	__	49	5	1/2	7.5/3.7-3.7	1 (Female)	3/4 (Male)	15 1/2"	9"	8 1/4"	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	9.2/6.3-4.6	1 1/2 (Female)	1 (Male)	17 13/16"	9 1/8"	8 3/16"	0000000	00000000	00000000	00000	00000000	000000
208–240V AC, 460V AC, Three Phase—Without Thermal Overload Protection
Hardwire
30	31	26	20	7	__	__	41	5	1/3	0.6/1.3-1.2	1 (Female)	3/4 (Male)	15 1/16"	9 1/4"	7 3/8"	0000000	00000000	00000000	0000	00000000	000000
38	36	32	27	21	__	__	49	5	1/2	1.7/1.7-0.8	1 (Female)	3/4 (Male)	15 1/16"	9 1/8"	7 3/16"	0000000	00000000	00000000	0000	00000000	000000
53	53	46	40	33	23	2	60	5	1	1.1/3.3-2.2	1 1/2 (Female)	1 (Male)	16 9/16"	9 1/8"	7 3/8"	0000000	00000000	00000000	00000	00000000	000000
82	82	82	81	80	71	61	85	5	2	2.4/4.9-4.8	2 (Male)	1 1/2 (Male)	20 11/16"	10 3/8"	10"	0000000	00000000	00000000	00000	00000000	00000000
120	120	120	120	112	105	92	95	5	3	3.9/8-7.8	2 (Male)	1 1/2 (Male)	24 3/8"	11 1/2"	10 1/2"	0000000	00000000	00000000	00000	00000000	00000000

Circulation Pumps for Fuel and Flammable Liquid

Pump fuel and flammable liquids, such as isopropyl alcohol and xylene. These pumps have an explosion-proof motor that is rated for environments where hazardous material is present. Maximum temperature is 250° F or the boiling point of the liquid being pumped, whichever is lower. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Pumps are gravity fed and require an elevated liquid source. Do not run dry or use with solids.

Note: If flow control is needed, place valves or reducers on the discharge side; never restrict the inlet of a pump with a valve or reducer.

For technical drawings and 3-D models, click on a part number.

With Thermal Overload Protection

Pumps
	Flow Rate, gpm									Pipe Size		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 10 ft. of Head	@ 20 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.		Each		Each
120/208-240V AC, Single Phase—Hardwire
25	31	25	13	1	62	150	264	1/2	7.4/3.7	3/4	1/2	15 5/8"	10 7/8"	7 1/2"	0000000	000000000	00000000	0000000
208-240/460V AC, Three Phase—Hardwire
25	31	25	13	1	62	150	264	1/2	2.4-2.2/1.1	3/4	1/2	15 5/8"	10 7/8"	7 1/2"	0000000	00000000	00000000	000000
100	__	78	48	10	64	150	264	1	2.8/1.4	1 1/2	1	15 1/4"	10 7/8"	8 1/2"	0000000	00000000	00000000	000000

Maintenance Kit

00000000

Each

0000000

Without Thermal Overload Protection

Pumps
	Flow Rate, gpm									Pipe Size		Overall					Replacement Impellers
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 30 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head, gpm	Max. ft. of Head	Max. Pressure, psi	Max. Viscosity, cP	hp	Current, A	Intake (Female, NPT)	Discharge (Female, NPT)	Lg.	Wd.	Ht.		Each		Each
120/208-240V AC, Single Phase—Hardwire
15	__	10	4	__	46	150	264	1/3	4.8/2.4	3/4	1/2	15 1/2"	10 7/8"	7 1/2"	0000000	000000000	00000000	0000000
100	78	64	48	10	64	150	264	1	12/6	1 1/2	1	17 1/4"	10 7/8"	8 1/2"	0000000	00000000	00000000	000000
208-240/460V AC, Three Phase—Hardwire
115	__	100	90	60	81	150	264	1 1/2	5-4.6/2.3	1 1/2	1	16 3/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000
125	114	98	78	18	69	150	264	2	5.7-5.4/2.7	2	1 1/2	17 1/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000
140	__	__	120	47	75	150	264	3	8.1-7.6/3.8	2	1 1/2	17 1/8"	11 7/8"	8 1/2"	0000000	00000000	00000000	000000

Maintenance Kit

00000000

Each

0000000

Self-Priming Circulation Pumps without Motor for Oil

Use these pumps to move lubricating oil such as hydraulic and motor oil. Also known as flexible impeller pumps, they create a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump. The impeller resists clogging and wear. Select a spark-free air motor for hazardous environments or attach an electric motor with a speed reducer or a belt pulley to alter the pump speed.

Repair kits (sold separately) include components such as impellers, O-rings, and seal lips.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.