Filter by
Inlet Pipe Size
DFARS Compliance
Certification
Light Duty Air-Powered Straight Die Grinders for Bits and Burs
 |
Style B |
Use these die grinders for light, intermittent grinding, deburring, and finishing.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
Inlet | Speed Control | Replacement Inch Die Grinder Collets | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Rotation Speed, rpm | Power, hp | For Shank Dia. | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Includes | Each | Each | ||||
| B | 70,000 | 1/10 | 1/8" | 5.3 ft³/min @ 90 psi | Back | NPT | 1/4 | 1/4" | Variable | Ring | 5 3/8" | 0.25 | 5-ft. Air Hose, Collet, Collet Wrench | 0000000 | 0000000 | 0000000 | 000000 | ||
Heavy Duty Air-Powered Straight Die Grinders for Bits and Burs
 |
Style C |
High-quality bearings ensure long spindle life, even when die grinders are used continuously.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
Style C—Style C are high-speed, lightweight, pencil-sized tools.
Inlet | Speed Control | Replacement Inch Die Grinder Collets | Replacement Die Grinder Collet Guards | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Rotation Speed, rpm | Power, hp | For Shank Dia. | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Includes | Each | Each | Each | |||||
| C | 60,000 | 1/10 | 1/8" | 9 ft³/min @ 90 psi | Back | NPT | 1/8 | 3/16" | Variable | Ring | 5 7/8" | 0.375 | 5-ft. Air Hose, Collet, Collet Wrench | 0000000 | 0000000 | 0000000 | 000000 | 0000000 | 000000 | ||
Heavy Duty Air-Powered Straight Die Grinders for Bits and Burs with Dust Hood
 |
Style A |
Collect the dust, debris, and fine particulates you generate while grinding by attaching the plastic dust hood on these die grinders to a vacuum system. With high-quality bearings and collets for long spindle life, these die grinders are rated for continuous use to take on tough jobs.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
2/5 hp—2/5 hp die grinders have a lever lock to prevent accidental start-up. You can trim the hood sleeve horizontally or vertically to accommodate accessories and workpieces.
Inlet | Speed Control | Replacement Dust Hoods | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Rotation Speed, rpm | Power, hp | For Shank Dia. | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Includes | Each | Each | ||||
| A | 25,000 | 2/5 | 1/4" | 21 ft³/min @ 90 psi | Back | NPT | 1/4 | 1 1/4" | Variable | Lever | 10 5/8" | 1.5 | 3 1/2" Vacuum Hose with Swivel Cuff, Collet, Collet Wrench, Dust Hood | 0000000 | 0000000 | 0000000 | 000000 | ||
Electric Straight Die Grinders for Bits and Burs
 |
Style C |
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
Style | Max. Rotation Speed, rpm | For Shank Dia. | Double Insulated | AC Voltage, V AC | Current, amp | Electrical Connection Component | Freq., Hz | Switch Type | Speed Control Type | Overall Lg. | Wt., lb. | Certification | Mfr. | Mfr. Model No. | Includes | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | 28,000 | 1/4" | Yes | 120 | 6.6 | Plug | 50, 60 | Slide | Variable | 14 5/8" | 3.75 | UL Listed, C-UL Listed, CSA Certified, CSA-US Certified | Makita | GD0800C | Collet, Collet Wrench, Side Handle | 0000000 | 0000000 | ||
Electric Flexible-Shaft Die Grinders for Bits and Burs
The bendable shaft with handpiece lets these die grinders operate smoothly with less vibration, noise, and heat than other hand-held die grinders.
For proper operation, clean and lubricate shafts every 50 hours of use.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
3/4" Diameter Collet Handpiece—3/4" diameter collet handpiece is well suited for fine, detailed applications.
1" Diameter Chuck Handpiece—1" diameter chuck handpiece has a three-jaw chuck that accepts bits and burs with shank diameters up to 5/32".
1" Diameter Collet Handpiece—1" diameter collet handpiece has a tapered front grip.
Shaft | Speed Control | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Rotation Speed, rpm | Power, hp | For Shank Dia. | Duty Cycle | AC Voltage, V AC | Current, amp | Electrical Connection Component | Dia. | Lg. | Switch Type | Type | Switch Type | Certification | Bend Radius | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bench Die Grinders | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" Diameter Collet Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | — | 4" | 3/32" Collet, 1/8" Collet | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" Diameter Chuck Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 15,000 | 1/3 | 3/32", 1/8", 5/32" | Continuous | 120 | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | — | 4" | 5/32" Chuck, Chuck Key | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8", 5/32" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | — | 4" | 5/32" Chuck, Chuck Key | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" Diameter Collet Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 15,000 | 1/3 | 3/32", 1/8", 1/4" | Continuous | 120 | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | — | 4" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8", 1/4" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Dial | — | 4" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Hanging Die Grinders | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/4" Diameter Collet Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | CSA Certified | 4" | 3/32" Collet, 1/8" Collet | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" Diameter Chuck Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 15,000 | 1/3 | 3/32", 1/8", 5/32" | Continuous | 120 | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | — | 4" | 5/32" Chuck, Chuck Key | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8", 5/32" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | CSA Certified | 4" | 5/32" Chuck, Chuck Key | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1" Diameter Collet Handpiece | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 15,000 | 1/3 | 3/32", 1/8", 1/4" | Continuous | 120 | 3.5 | Plug | 3/16" | 63" | Toggle | Variable | Foot Pedal | — | 4" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18,000 | 1/6 | 3/32", 1/8", 1/4" | Intermittent | 120 | 1.7 | Plug | 5/32" | 39" | Toggle | Variable | Foot Pedal | CSA Certified | 4" | 3/32" Collet, 1/8" Collet, 1/4" Collet, Lock Pin, Wrench | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Heavy Duty Air-Powered Angled Die Grinders for Bits and Burs
 |
Style C |
With high-quality bearings and collets for long spindle life, these die grinders are rated for continuous use to take on tough jobs.
Die grinders have an angled head for accessing hard-to-reach places and a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the die grinder you choose.
Style C—Style C are high-speed, lightweight, pencil-sized tools.
Inlet | Speed Control | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Max. Rotation Speed, rpm | Power, hp | For Shank Dia. | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Head Angle | Overall Lg. | Wt., lb. | Includes | Each | |||
| C | 80,000 | 1/10 | 1/8" | 9 ft³/min @ 90 psi | Back | NPT | 1/8 | 3/16" | Variable | Ring | 98° | 5 1/2" | 0.375 | 5-ft. Air Hose, Collet, Collet Wrench | 0000000 | 0000000 | ||
Dremel Rotary Tool Kits
Grind, sand, finish, and polish with these versatile kits.
They come with a light duty Dremel grinder that accepts a multitude of accessories. Grinders have a shaft lock for easy tool changes.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Electric
 |
Mfr. Model No. | Max. Rotation Speed, rpm | For Shank Dia. | Switch Type | Speed Control Type | AC Voltage, V AC | Current, amp | Electrical Connection Component | Overall Lg. | Wt., lb. | Certification | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4000-2/30 | 35,000 | 1/8" | Slide | Variable | 120 | 1.6 | Plug | 8 1/2" | 1.25 | CSA Certified | Light Duty Grinder, 30 Assorted Accessories, Circle Cutter, Plastic Storage Case | 0000000 | 0000000 |
Cordless
 |
Mfr. Model No. | Max. Rotation Speed, rpm | For Shank Dia. | Switch Type | Speed Control Type | Batteries Included | Overall Lg. | Wt., lb. | Certification | Includes | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7760-N/10 | 25,000 | 1/32", 1/16", 3/32", 1/8" | Push Button | Variable | Yes | 7 1/2" | 1.5 | CSA Certified | Light Duty Grinder, 10 Assorted Accessories, 2.75-Hour Charger | 00000000 | 000000 |
